KEK Wall Murals & Wallpaper Instructions
- June 7, 2024
- KEK
Table of Contents
KEK Wall Murals & Wallpaper
NON-WOVEN WALLPAPER
Step 1
Make sure the surface is suitable for this type of wallpaper. Prepare the
surface by making sure it is dry, clean, smooth, stable, evenly absorbent, and
of uniform color with no old paint or rust showing through. Also, make sure
all old nails and screws are removed beforehand.
Step 2
We recommend `Ready & Roll for non-woven wallpaper’ by Perfax or similar
wallpaper glue from other brands. Apply the glue directly to the wall,
slightly wider than the wallpaper sheet (48.7 cm).
Step 3
Make sure the first sheet is placed vertically plumb by using a spirit level.
Place the sheet directly onto the pasted wall, using a wallpaper spatula to
make sure there are no air bubbles.
Step 4
The sheet can now be trimmed at the top and bottom. Place subsequent sheets
one by one, using a wallpaper spatula to ensure that joins are tightly butted
and there is no overlap. Make sure the pattern or image matches up with the
previous sheet.
Step 5
Carefully pat away excess glue with a piece of kitchen paper. Be extra careful
with dark colors! Because the wallpaper is `uncoated’ (no protective layer)
the ink can come off slightly.
It is important to avoid excessive heat or draughts when hanging and drying wallpaper, otherwise, the wallpaper dries too quickly and this can lead to gapping at seams.