Reflying Electronic RHK35 MyTag Instructions
- June 12, 2024
- Reflying Electronic
Table of Contents
Electronic
RHK35 MyTag
Instructions
Product Picture
Add MyTag to Find My (Add other item)
2.1 Add MyTag with factory settings state
- Update to the latest version of iOS or iPadOS. Turn on Bluetooth of your phone, then pull out the mylar of MyTag.
- Open the Find My app, select the Items, Add Other Item, search for MyTag ，and follow the onscreen instructions to complete the adding operation.
2.2 Add
MyTag in other state
- If MyTag is not added to the Apple ID after being reset for 10 minutes, Bluetooth will stop transmitting signals to save power. You need to power off/on the battery five times to reset it again. Reset is successful if hear a different power-on sound. Then you can start adding devices again. The method is the same as 2.1.
- If reset the added MyTag improperly, first you need to delete MyTag from Find My app and release the binding to Apple ID and then it can be added to any iOS device again. The adding method is the same as 2.1.
Operation Instructions
MyTag can help you easily track all kinds of items. As long as you hang one on
your keychain and put one in your bag, you can see where your keys and bag are
in Find My app.
3.1 Find items at close range – play sound function
Just adding one piece MyTag, finding things will be a breeze. You can click
“Play a Sound” in the Find My app, or say “Hey Siri, Find my keys” to play a
sound to indicate the location. If it’s hiding nearby, such as under a
cupboard or in the next room, you can easily follow the sound to find it.
3.2 Automatically restore connection after disconnection
If the distance between the paired MyTag and the iOS device exceeds the
Bluetooth connection distance (In the closed barrier-free space is 50m), when
you click “Play Sound” in the Find My app, it will prompt that the connection
cannot be made; If MyTag and the iOS device are in Bluetooth connection
distance, click “Play a Sound” in the Find My app, it will play consecutive
sounds, and you can find the items just following the sound.
3.3 Find items with help from hundreds of millions of friends.
Find My Network will help you find your belongings when they are left far
behind, like at the beach or gym. As long as iOS device users allow Find My
network access, MyTag will send out a secure Bluetooth signal that can be
detected by nearby iOS devices in Find My network, these devices send the
location of your MyTag device to iCloud, then you can go to the Find My app
and see it on the map. The whole process is anonymous and encrypted to protect
your privacy. And it’s efficient, so there is no need to worry about the
battery life and data usage.
3.4 Lost Mode – Find things easier
Just like other Apple devices, MyTag can be put into Lost Mode. You’ll
automatically get a notification when it’s detected by other devices in the
Find My network. You can activate Lost Mode in Find My app by following the
onscreen instructions, adding your phone number or email account. So if others
pick up your MyTag, they can know more info about it and know how to contact
you by following the learning more page instruction in Find My app .
3.5 Prevent unwanted tracking
To prevent unwanted tracking, when someone else’s MyTag device is mixed into
your belongings, your Apple device will find it and send you an alert
notification. If you haven’t found this device after a while, it will play a
sound so you can find it. But don’t worry, if someone next to you wearing a
MyTag device, as long as the device does not leave the owner, you will not
receive a notification.
3.6 Privacy protection
Only you can see where your MyTag is. No location data or location history is
physically stored inside MyTag. Communication with the Find My network is end-
to-end encrypted so that only the owner of a device has access to its location
data, and no one, including Apple, knows the identity or location of any
device that helped find it.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
IC Caution:
This device complies with Industry Canada s licence-exempt RSSs. Operation
is subjectto the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation ofthe device.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Shenzhen Reflying Electronic Co.,Ltd