California Trimmer RL205H Homeowner Reel Mower User Manual

June 13, 2024
CALIFORNIA TRIMMER

California Trimmer RL205H Homeowner Reel Mower

California Trimmer RL205H Homeowner Reel Mower

This model was produced between about 1968 and 2003. Some but not all parts are interchangeable with the newer homeowner model that began in 2014. Be sure to know which model you have before ordering parts.

PARTS INFORMATION

Parts Information

ITEM PART NUMBER DESCRIPTION QTY COMMENTS
1 H0506 LEVER TIP (RED) 1
2 25502 GRIP, HANDLE 2
3 931 COTTER PIN, 3/32 x 3/4 Z 2
4 H0507-2 CLUTCH ROD KIT, HO, 2-PIECE 1 Kit incl top, bottom, coupling &

nuts
5| H0503| HANDLE, ROLLER LIFT| 1| Black Only
6| 905| BOLT, 1/4-28 x 1-1/4 HEX CAP| 1|
7| H0501ST| HANDLE, TOP| 1| Currently not available
8| 919| NUT, 10-32 NTE TIN NYLON Z| 3|
9| 901| BOLT, 10-32 x 1-1/4 PH PAN| 3|
10| H0504| BOLT, TRUNNION 5/16-18| 2|
11| H0505| LEVER, CLUTCH| 1|
12| 944| NUT, 1/4-28 THIN NYLOCK| 4|
13| H0510| STRAP SET, ROLLER LIFT| 1|
14| H0508| THROTTLE LEVER ASSY| 1
15| 947| THROTTLE WIRE HOLDER| 1
16| 909| BOLT, 5/16-24 x 3/4 HX G5 Z| 23
17| 922| NUT, 5/16-24 THIN NYLOCK| 20
18| 950| NUT, 1/4″, COUPLING| 1
19| 920| NUT, 1/4-28 HEX Z| 2|
20| 021| BOLT, 1/4-28 x 1″ HHCS| 1|
21| H0507-2| CLUTCH ROD KIT, HO, 2-PIECE| 1| Kit incl top, bottom, coupling & nuts
22| H0512| TOGGLE| 1|
23| H0609| CHAIN, LIFT, HO| 1|
24| H0501SB| HANDLE, BOTTOM| 1| Currently not available
25| H0806| LINK, CONN #41| 5|
26| H0807| LINK, HALF #41| 1
27| 941| SCREW, 5/16 x 5/8 RND SLOT M/S| 1
28| H0607| ROLLER YOKE, OLD HO| 1
29| H0608| BUSHING, YOKE| 2
30| 928| WASHER, 5/16 SAE FLAT Z| 11
31| 927| WASHER, 5/16 SPLIT LOCK| 9|
32| 910| BOLT, 5/16-24 x 7/8 HX G5 Z| 4|
33| H0610| SPRING, ROLLER| 3|
34| H0605| SPROCKET, ROLLER, LARGE, 30T| 1| NLA, Change sprockets and chain to

40

35| H0606| SPACER, SPROCKET, HO| 3|
36| 913| BOLT, 5/16-24 x 1-3/4 HX G5 Z| 3|
37| 007| NUT, 1/4-20 NYLOCK STD| 4|
38| 948| WASHER, 1/4 SAE FLAT Z| 9|
39| 934| SET SCREW, 1/4-20 x 1/4 SOC SET| 3|
40| H0604| CLAMP, ROLLER| 2|
41| 603| U-BOLT 1/44-28 ROUND, W/HDWE| 2|
43| H0304| HOLDER, BEARING, 2-EAR W-5/8″ BRG| 4| With ball bearing installed
44| 903| BOLT, 1/4-28 x 1/2 HX G5 Z| 5|
45| H0602| SHAFT, ROLLER HO| 1|
46| H0601| 8″ ROLLER, HO| 1|
48| H0706| GUARD, BELT HO| 1|
49| H0408| GUARD, ENGINE CHAIN HO| 1| NLA, H0408N can be used with modification
50| 915| SCREW, 3/8-24 x 1″, HEX CAP GR5, ZINC| 2|
51| H0402N| SHIELD, GRASS HO| 1|
ITEM| PART NUMBER| DESCRIPTION| QTY| COMMENTS
---|---|---|---|---
52| H0422| HANDLE, HEIGHT ADJUST| 1|
53| H0421| BRACKET, HEIGHT ADJUST| 1
54| 942| SCREW, 1/4-28 x 1-1/2 PHIL FL| 1
55| 943| BOLT, 1/4-28 x 3/4 FL SOC P| 2
56| H0426| CONNECTOR| 1
57| 930| WASHER, 1/2 SAE FLAT G9 Z| 1
58| H0407| CHAIN, ENGINE, OLD HO, 41×38| 1
59| H0424| BRACKET, FRONT| 1|
60| H0401-K| BED KNIFE KIT, HO| 1| Includes replaceable bed knife (#20401)
61| H0410| GUARD, CHAIN REEL| 1| Dark Green Only
62| H0423| GRIP, FLAT| 1|
63| H0425| SPRING, HEIGHT ADJUSTER| 1|
64| H0307| BEARING, WHEEL| 4| Fits 5/8″ drive shaft
65| H0306| TIRE ASSY W/BEARING HO| 2| Fits 5/8″ drive shaft
66| H0301| SHAFT, DRIVE, 5/8″ HO| 1|
67| H0309| SPROCKET, 8T x 5/8 HO| 2| Includes set screws
67| H0816| SPROCKET, 9T x 5/8, HO| 1| Includes set screws
67| H0818| SPROCKET, 10T x 5/8, HO| 1| Includes set screws
68| H0305| COLLAR, HO| 1| Includes set screws
69| 935| SET SCREW, 5/16-24 x 5/16 KNURLED| 6|
70| 20611| CHAIN, ROLLER, OLD HO, 41×36| 1
71| H0204N| HOLDER, REEL BEARING, RIGHT, HO| 1
72| H0203| HOLDER, REEL BEARING, LEFT, HO| 1
73| H0202| BEARING, REEL| 1
74| H0201-5| BLADE, REEL, 20″, 5 BLADE| 1
74| H0201-7| BLADE, REEL, 20″, 7 BLADE| 1|
75| H0820| SPROCKET, REEL, 11T x 5/8| 1
76| H0310| SPROCKET, REEL, 17T x 5/8| 1
77| H0206| CHAIN, REEL, OLD HO, 41×46| 1
78| H0403| ROD, TIE 20″| 1
79| 917| BOLT, CASTER AXLE, 20″| 2
80| 929| WASHER, 3/8 SAE FLAT Z| 7|
81| 908| NUT, 3/8-24 NYLOCK Z| 2|
82| H0101N| BRACKET, CASTER, 20″| 1| Includes zerk fittings
83| H0106| BUSHING, CASTER BAR| 2|
84| 924| NUT,1/2-20 NTE NYLON Z| 1|
85| 25102-2| CASTER SET (2)| 1| Alternative rubber casters 25102-2D
86| H0700| PULLEY, ENGINE, 2-1/2″ x 5/8″, HO| 1|
86| H0700H| PULLEY, ENGINE, 2-1/4 x 3/4, HO| 1| Honda engine, 3/4″ crankshaft
87| H0705| BELT, 18″| 1|
88| H0702| PULLEY, PILLOW BLOCK, 3″ x 5/8″, HO| 1|
89| H0703| KEY, PULLEY| 1|
90| H0704| KEY, PULLEY| 1|
91| H0707HN| PILLOW BLOCK HOUSING| 1| Fits old and new units
91| H0707BN| PILLOW BLOCK BEARING / SHAFT| 1| Fits old and new units
92| H0710| SWIVEL| 1|
93| H0709| TOGGLE, BELT TIGHTENER, HO| 1|
94| H0711| IDLER (FOR BELT TIGHTENER)| 1| Bearing set only, angle bracket

H0712

95| 925| NUT, PAL| 1| Currently not available
ITEM| PART NUMBER| DESCRIPTION| QTY| COMMENTS
---|---|---|---|---
96| 25803H| HOOK, CATCHER, HONDA| 1|
97| H0803| HOOK, CATCHER, BRIGGS| 1|
98| H0404| SCREW, MICRO ADJUSTING| 2|
99| H0405| BRACKET, ADJUSTER, LEFT| 1|
100| H0406| BRACKET, ADJUSTER, RIGHT| 1|
101| TBD| RIVET, E3 x .375 STPLSOL| 3| NLA, Use H0921, H0922, H0923 to mount
102| H0207| FITTING, GREASE| 4|
TBD| 20801| GRASS CATCHER, 20″| 1| High-density polyethylene

Safety Precautions

Safety Precautions

20” Front Rollers

20” Front Rollers

The front roller replace the standard caster wheels and provides a few advantages.
First, this adds additional weight to the front of the mower for more stable tracking which is helpful for rougher yards. It also minimizes uneven cut from low spots and allows the mower to hang over the lawn edges and flower beds for extra close cuts. They are made of hard plated steel and have large sealed ball bearing for long life durability

Back-Lapping Kits

Back-Lapping Kits

Overviews

20/25” Front Roller

Overviews

FR‐20 ‐ 20” Front Roller Assembly

Ref # Part Number Description Qty Comments
1 H0939 FRAME, FR‐20, GREEN 1
2 935 SET SCREW, 5/16‐24 x 5/16 KNURLED 2
3 H0940 COLLAR, FR‐20, FR‐25 1
4 H0941 ROLLER SHAFT, FR‐20 1
5 H0942 BEARING SLEEVE, FR‐20, FR‐25 2
6 H0934 BALL BEARING, FR‐20, FR‐25 ROLLER 2
7 H0943 ROLLER ONLY, FR‐20 1
8 H0944 BRACKET, GREEN, FR‐20, FR‐25 1

FR‐25 ‐ 25” Front Roller Assembly

Ref #| Part Number| Description| Qty| Comments
1| H0945| FRAME, FR‐25, GREEN| 1|
2| 935| SET SCREW, 5/16‐24 x 5/16 KNURLED| 2|
3| H0940| COLLAR, FR‐20, FR‐25| 1|
4| H0946| ROLLER SHAFT, FR‐25| 1|
5| H0942| BEARING SLEEVE, FR‐20, FR‐25| 2|
6| H0934| BALL BEARING, FR‐20, FR‐25 ROLLER| 2|
7| H0947| ROLLER ONLY, FR‐25| 1|
8| H0944| BRACKET, GREEN, FR‐20, FR‐25| 1|

CUSTOMERS SUPPORT

Logo

1028 4th Street SW, Bldg A • Auburn, WA 98001 • Phone: 253-333-3345 • Fax: 253-414-1293
www.caltrimmer.com info@caltrimmer.com

Logo

Documents / Resources

| California Trimmer RL205H Homeowner Reel Mower [pdf] User Manual
RL205H Homeowner Reel Mower, RL205H, Homeowner Reel Mower, Reel Mower
---|---
| California Trimmer RL205H Homeowner Reel Mower [pdf] User Manual
RL205H Homeowner Reel Mower, RL205H, Homeowner Reel Mower, Reel Mower, Mower

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals