ELMAG 81811 Premium WPMEH 60-2-K Hydraulic Workshop Press Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 81811 Premium WPMEH 60-2-K Hydraulic Workshop Press
Specifications:
- Press Power Max : 60 t
- Electrohydraulic drive
- Two drive speeds
- Hydraulic cylinder laterally adjustable
- Manual hand pump
- Press table with chain (height adjustment)
- Oil flow step 1/2
- Piston speed step 1/2
- Return travel speed: 10.79 mm/s
- Motor power : 1500 W
- Voltage: 400/50 V/Hz
- Machine height : 2120 mm
- Machine length without pump : 1000 mm
- Machine width: 695 mm
- Inlet length beam width : 750 mm
- Inlet height max.: 260 mm
- Machine length with pump : 947 mm
- Machine width with pump : 1315 mm
- Piston stroke : 805 mm
- Weight: 540 kg
Product Usage Instructions
Safety Precautions:
Before using the hydraulic workshop press, read all safety instructions in the manual.
Setup
a. Ensure the press is placed on a stable, flat surface.
b. Connect the machine to the appropriate power source.
Operating the Press
a. Turn on the machine using the on/off control valve.
b. Adjust the hydraulic cylinder laterally as needed for your pressing task.
c. Use the manual hand pump to operate the press table and adjust the height using the chain.
Maintenance:
a. Regularly check oil levels and top up if necessary.
b. Ensure all moving parts are well lubricated.
FAQ
- Q: What is the maximum press power of this hydraulic workshop press?
- A : The maximum press power of this model is 60 tons.
- Q: How do I adjust the press table height?
- A: The press table height can be adjusted using the chain mechanism provided.
- Q: What is the voltage requirement for this machine?
- A : The machine operates at a voltage of 400/50 V/Hz.
PRODUCT HIGHLIGHTS
Standard features
- Overload safety valve
- Compression pressure gauge
- On/off control valve
- Cylinder piston, chrome-plated
- Press table with the locking pin
- Operating instructions/CE
SPECIFICATIONS
- press power max: 60 t
- electrohydraulic drive : Yes
- two drive speeds: Yes
- hydraulic cylinder laterally adjustable : Yes
- Manual handpump: Yes
- press table chain (height adjustment): Yes
- oil flow step : 1/2 2.82 / 11.84 l/min
- piston speed step : 1/2 8.69 / 2.07 mm/s
- Return travel speed: 10.79 mm/s
- motor power : 1500 W
- voltage: 400/50 V/Hz
- machine height: 2120 mm
- machine length without pump : 1000 mm
- machine width: 695 mm
- inlet length : 750 mm
- beam width : 260 mm
- inlet height max :. 947 mm
- machine length with pump : 1315 mm
- machine width with pump : 805 mm
- Piston stroke : 380 mm
- Weight : 540 kg
ELMAG® – Start-up Service
Competent execution guaranteed
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths, and central lubrication systems
- Testing of electrics, safety components, and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjusting machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with a marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>