Genius NX-7XXX Series USB Wireless Mouse User Guide

: June 10, 2024
: GENIUS

Table of Contents

NX-7XXX Series USB Wireless Mouse
Product Information: Wireless Mouse
Product Usage Instructions: Wireless Mouse
Overview
Factory Settings
Federal Communication Commission(FCC) interference statement
Disclaimer
Declaration of Conformity
Symbol for Separate Collection in European Countries
492, Sec. 5, Chongxin Rd., Sanchong Dist., New Taipei City 241017, Taiwan
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NX-7XXX Series USB Wireless Mouse

Product Information: Wireless Mouse

Model Numbers: NX-7XXX Series, NX-8XXXX Series, Micro Traveler 900S, ECO-8XXX Series, Micro Traveler 9000R, Ergo 8XXXX Series
Complies with Council Directive on the Approximation of the Laws of the Member States relating to Radio Equipment Directive (2014/53/EU)
Standards applied for electromagnetic compatibility evaluation
Manufacturer: KYE SYSTEMS CORP.

Product Usage Instructions: Wireless Mouse

Insert batteries into the mouse following the +/- symbols on the bottom of the mouse.
Plug in the USB receiver to your device’s USB port.
Switch on the mouse using the power button located on the bottom of the mouse.
The mouse should automatically connect to your device. If it does not, press and hold the “connect” button on the bottom of the mouse until it connects.
You can now use the mouse to navigate your device.
To switch off the mouse, simply press and hold the power button until it turns off.
When not in use, store the USB receiver inside the mouse to prevent loss.
Replace batteries when necessary.

Overview

The instruction is as follows

NX-7XXX Series USB Wireless Mouse 1

Battery life may vary based on user and computing conditions

NX-7XXX Series USB Wireless Mouse 2

Factory Settings

Left Button: Provides traditional mouse functions like click, double click and drag.
Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows documents.
Right Button: Provides traditional mouse click functions.

Federal Communication Commission(FCC) interference statement

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in particular installations. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient / Relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:3

This device may not cause harmful interference.and
this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION: Changes or modiﬁcations not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. You are cautioned that changes or modiﬁcations not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Disclaimer

The following does not apply to any country where such provisions are inconsistent with local law: KYE Systems Corp. makes no warranties with respect to this documentation, whether expressed or implied. All material is provided “as is”. This includes, but is not limited to, any implied warranties of merchantability and ﬁtness is for a particular purpose. The information covered in this document is subject to change without notice. KYE Systems Corp. assumes no responsibility for any errors that may appear in this document. All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies. Copyright KYE Systems Corp. All rights reserved.

Declaration of Conformity

The following designated product:
Wireless Mouse: NX-7XXX Series, NX-8XXXX Series, Micro Traveler 900S, ECO-8XXX Series, Micro Traveler 9000R, Ergo 8XXXX Series M/N:GM-150036/R is herewith conﬁrmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Radio Equipment Directive (2014/53/EU). For the evaluation regarding the electromagnetic compatibility, the following standards were applied:

300 440 / EN 301 489-1 / EN 301 489-3 / EN 62479 / EN 62368-1 This declaration is prepared for the manufacturer: KYE SYSTEMS CORP. #492, Sec. 5, Chongxin Rd., Sanchong Dist., New Taipei City 241017, Taiwan (R.O.C.)

Symbol for Separate Collection in European Countries

This symbol indicates that this product is to be collected separately. The following apply only to users in European countries:

This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
For more information, contact the retailer or the local authorities in charge of waste management.

M/N:GM-150036/R
FCC ID: FSUGMZLM
PATING 5V 100mA(max)
www.geniusnet.com｜KYE Systems Corp. MADE IN CHINA