PKM F7-2SQ Built In Oven Instruction Manual

PKM F7-2SQ Built In Oven

Product Information

The F7-2SQ built-in oven is a multifunctional oven with various cooking options. It has a 60cm width and comes with a grill, lower and upper heating elements, turbo heating element, and a thermostat. The oven has a lighting power of 15-25 W and a supply voltage of 220-240 V, 50/60 Hz. It also features a mechanical or digital timer, and a damp cleaning option for easy maintenance.

Product Usage Instructions

1. Electric Connection: Before plugging in the oven, ensure that the electrical supply matches the requirements mentioned in the user manual.
2. Safety Precautions: Read and follow all the safety precautions mentioned in the user manual before using the oven.
3. Functionality: The oven has various cooking options including grill, lower and upper heating elements, turbo heating element, and a thermostat. Choose the required function according to your cooking requirements.
4. Grilling: To use the grill function, add some  water in the drip tray and place it below the grill. Preheat the oven to the required temperature and place the food on the grill. Ensure that the grill or the baking tray is placed between two shelves and that it is balanced before placing food on it.
5. Cooking: For cooking, choose the required function according to your recipe. Preheat the oven to the required temperature before placing the food inside the oven. Follow the cooking time mentioned in your recipe.
6. Cleaning: After use, allow the oven to cool down before cleaning. Use a damp cloth to clean the exterior of the  oven. For interior cleaning, use the damp cleaning option provided in the oven. For stubborn stains, use a mild cleaning agent and a soft cloth.

By following the instructions mentioned in the user manual, you can efficiently utilize the functions of the F7-2SQ built-in oven for all your cooking needs.

IMPORTANT WARNINGS

1. Installation and repair should always be performed by “AUTHORIZED SERVICE”. Manufacturer shall not be held responsible for operations performed by unauthorized persons.
2. Please read this operating instructions carefully. Only by this way you can use the appliance safely and in a correct manner.
3. The oven should be used according to operating instructions.
4. Keep children below the age of 8 and pets away when operating.
5. The accessible parts may be hot during use. Young children must be kept away.
6. WARNING : Danger of fire: do not store items on the cooking surfaces.
7. WARNING : During use the appliance becomes hot. Care should be taken to avoid touching heating elements inside the oven.
8. Setting conditions of this device are specified on the label. (Or on the data plate)
9. The accessible parts may be hot when the grill is used. Small children should be kept away.
10. WARNING : This appliance is intended for cooking. It should not be used for other purposes like heating a room.
11. To clean the appliance, do not use steam cleaners.
12. Ensure that the oven door is completely closed after putting food inside the oven.
13. NEVER try to put out the fire with water. Only shut down the device circuit and then cover the flame with a cover or a fire blanket.
14. WARNING : Children less than 8 years of age shall be kept away unless continuously supervised.
15. Touching the heating elements should be avoided.
16. CAUTION : Cooking process shall be supervised. Cooking process shall always be supervised.
17. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
18. This device has been designed for household use only.
19. Children must not play with the appliance. Cleaning or user maintenance of the appliance shall not be performed by children unless they are older than 8 years and supervised by adults.
20. Keep the appliance and its power cord away from children less than 8 years old.
21. Put curtains, tulles, paper or any flammable (ignitable) material away from the appliance before starting to use the appliance. Do not put ignitable or
22. Keep the ventilation channels open.
23. The appliance is not suitable for use with an external timer or a separate remote control system.
24. Do not heat closed cans and glass jars. The pressure may lead jars to explode.
25. Oven handle is not a towel drier. Do not hang towels, etc. on the oven handle.
26. Do not place the oven trays, plates or aluminium foils directly on the oven base. The accumulated heat may damage the base of the oven.
27. While placing food to or removing food from the oven, etc., always use heat resistant oven gloves.
28. Do not use the product in states like medicated ability of judgement.
29. Be careful when using alcohol in your foods.
30. After each use, check if the unit is turned off.
31. If the appliance is faulty or has a visible damage, do not operate the appliance.
32. Do not touch the plug with wet hands. Do not pull the cord to plug off, always hold the plug.
33. Do not use the appliance with its front door glass removed or broken.
34. Place the baking paper together with the food into a pre-heated oven by putting it inside a cooker or on an oven accessory. (tray, wire grill etc.)
35. Do not put objects that children may reach on the appliance.
36. It is important to place the wire grill and tray properly on the wire racks and/or correctly place the tray on the rack. Place the grill or tray between two rails and make sure it is balanced before putting food on it.
37. Against the risk of touching the oven heater elements, remove excess parts of the baking paper that hang over from the accessory or container.
38. Never use it at higher oven temperatures than the maximum usage temperature indicated on your baking paper. Do not place the baking paper on the base of the oven. Against the risk of touching the oven heater elements, remove excess parts of the baking paper that hang over from the accessory or container.
39. When the door is open, do not place any heavy object on the door or allow children to sit on it. You may cause the oven to overturn or the door hinges to be damaged.
40. The packaging materials are dangerous for children. Keep packaging materials away from the reach of children.
41. Do not use abrasive cleaners or sharp metal scrapers to clean the glass as the scratches that may occur on the surface of the door glass may cause the glass to break.
42. User should not carry the oven alone.
43. During usage, the internal and external surfaces of the oven get hot. As you open the oven door, step back to avoid the hot vapour coming out from the interior. There is risk of burning.
44. Do not place heavy objects when oven door is open, risk of toppling.
45. Oven supply can be disconnected during any construction work at home. After completing the work, re-connecting the oven shall be done by authorized service.
46. User should not dislocate the resistance during cleaning. It may cause an electric shock.
47. To prevent overheating, the appliance should not be installed behind of a decorative cover.
48. Turn off the appliance before removing the safeguards. After cleaning, install the safeguards according to instructions.
49. Cable fixing point shall be protected.
50. Please don’t cook the food directly on the tray / grid. Please put the food into or on appropriate tools before putting them in the oven.

Electrical Safety

1. Plug the appliance in a grounded socket protected by
2. Have an authorized electrician set grounding equipment. Our company shall not be responsible for the damages that shall be incurred due to using the product without grounding according to local regulations.
3. The circuit breaker switches of the oven shall be placed so that end user can reach them when the oven is installed.
4. The power supply cord (the cord with plug) shall not contact the hot parts of the appliance.
5. If the power supply cord (the cord with plug) is damaged, this cord shall be replaced by the manufacturer prevent a hazardous situation.
6. Never wash the appliance by spraying or pouring water on it. There is a risk of electrocution.
7. WARNING : To avoid electric shock, ensure that the device circuit is open before changing the lamp.
8. WARNING : Cut off all supply circuit connections before accessing the terminals.
9. Do not use cut or damaged cords or extension cords other than the original cord.
10. Make sure that there is no liquid or humidity in the outlet where the product plug is installed.
11. The rear surface of the oven also heats up when the oven is operated. Electrical connections shall not touch the rear surface, otherwise the connections may be damaged.
12. Do not tighten the connecting cables to the oven door and do not run them over hot surfaces. If the cord melts, this may cause the oven to short circuit and even a fire.
13. Unplug the unit during installation, maintenance, cleaning and repair.
14. If the power supply cable is damaged, it must be replaced by its manufacturer or authorized technical service or any other personnel qualified at the same level, in order to avoid any dangerous situation.
15. Make sure the plug is inserted firmly into wall socket to avoid sparks.
16. Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.
17. An omnipolar switch capable to disconnect power supply is required for installation. Disconnection from power supply shall be provided with a switch or an integrated fuse installed on fixed power supply according to building code.
18. Appliance is equipped with a type “Y” cord cable.
19. Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For appliances with over voltage category below III, disconnection device wiring code.

Intended Use

1. This product has been designed for domestic use. Commercial use is not permitted.
2. This appliance may only be used for cooking purposes. It shall not be used for other purposes like heating a room.
3. This appliance shall not be used to heat plates under the grill, drying clothes or towels by hanging them on the handle or for heating purposes.
4. The manufacturer assumes no responsibility for any damage due to misuse or mishandling.
5. Oven part of the unit may be used for thawing, roasting, frying and grilling food.
6. Operational life of the product you have purchased is 10 years. This is the period for which the spare parts provided by the manufacturer.

Electrical Connection
This oven must be installed and connected to its place correctly according to manufacturer instructions and by an authorized service. Appliance must be installed in an oven enclosure providing high ventilation. Electrical connections of the appliance must be made only via sockets having earth system furnished in compliance with rules. Contact an authorized electrician if there is no socket complying with the earthed system at where appliance will be placed. Manufacturing company is by no means responsible for damage resulting from connection of non-earthed sockets to appliance. Plug of your oven must be earthed; ensure that socket for the plug is earthed. Plug must be located in a place that can be accessed after installation. Your oven has been manufactured as 220-240 V 50/60 Hz. AC power supply compliant and requires a 16 Amp fuse. If your power network is different that these indicated values, refer to an electrician or your authorized service. When you need to replace the electrical fuse, please ensure that electrical connection is made as follows

• Phase (to live terminal) brown cable
• Blue cable to neutral terminal
• Yellow-green cable to earth terminal

Oven disconnecting switches must be in an accessible place for final user while oven is in its place. Power supply cable (plug in cable) mustn’t touch hot parts of the appliance. If supply cord (plug in cable) is damaged, this cord must be replaced by the importer or its service agent or an equally competent personnel to prevent a hazardous situation.

INTRODUCING THE APPLIANCE

1. Control panel
2. In tray wire grill
3. Deep tray
4. Standard tray
5. Roast chicken skewer
6. Oven door
7. Lamp
8. In tray wire grill
9. Standard tray

Accessories (optional)

TECHNICAL SPECIFICATIONS

Technical specifications can be changed without prior notice to improve product quality. The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions. Figures in this guide are schematic and may not be exactly match your product.

INSTALLATION OF APPLIANCE
Ensure that electrical installation is suitable for operationalising the appliance. If not, call an electrician and plumber to make necessary  to arise due to operations by unauthorized people and product warranty becomes void.

WARNING : It is customer’s responsibility to prepare the location the product shall be placed on and also have power utility prepared

WARNING : The rules about electrical local standards must be adhered to during product installation.

WARNING : Check for any damage on the product before installing it. Do not have product installed if it’s damaged. Damaged products pose danger for your safety.

Important Warnings for Installation:
Cooling fan shall take extra steam out and prevent outer surfaces of appliance from overheating during operation of oven. This is a necessary condition for better appliance operation and better cooking. Cooling fan shall continue operation after cooking is finished. Fan shall automatically stop after cooling is completed. A clearance must be left behind the enclosure where you’ll place the appliance for efficient and good operation. This clearance shouldn’t be ignored as it’s required for ventilation system of the appliance to operate.

Right Place For Installation
Product has been designed to be mounted to worktops procured from market. A safe distance must be left between the product and kitchen walls or furniture. See the drawing provided on the next page for proper distances. (values in mm).

• Used surfaces, synthetic laminates and adhesives must be heat resistant. (minimum 100 °C)
• Kitchen cupboards must be level with product and secured.
• If there is a drawer below the oven, a rack must be placed between oven and drawer.

WARNING: Do not install the product next to refrigerators or coolers. The heat emitted by the product increases the energy consumption of cooling devices.

WARNING : Do not use door and/or handle to carry or move the product.

60 cm Built-ln Oven Installation And Mounting
Place of use for product must be located before starting installation. Product mustn’t be installed in places which are under the effect of strong air flow. Carry the product with minimum two people. Do not drag the product so that floor isn’t damaged. Remove all transportation materials inside and outside the product. Remove all materials and documents in the product.

Installation Under Counter
Cabin must match the dimensions provided in figure 2. A clearance must be provided at the rear part of the cabin as indicated in the figure so that necessary ventilation can be achieved. After mounting, the clearance between lower and upper part of the counter is indicated in figure 5 with “A”. It’s for ventilation and shouldn’t be covered.

Installation In An Elevated Cabinet
Cabin must match the dimensions provided in figure 4. The clearances with the dimensions indicated in the figure must be provided at the rear part of cabin, upper and lower sections so that necessary ventilation can be achieved.

Installation Requirements
Product dimensions are provided in the figure 3. Furniture surfaces for mounting and mounting materials to be used must have a minimum temperature resistance of 100 oc. Mounting cabin must be secured and its floor must be plane for product not to tilt over. Cabin floor must have a minimum strength that would handle a load of 60 kg.

Placing And Securing The Oven
Place the oven into the cabin with two or more people. Ensure that oven’s frame and front edge of the furniture match uniformly. Supply cord mustn’t be under the oven, squeeze in between oven and furniture or bend. Fix the oven to the furniture by using the screws provided with the product. Screws must be mounted as shown in figure 5 by passing them through plastics attached to frame of the product. Screws mustn’t be overtightened. Otherwise, screw sockets might be worn. Check that oven doesn’t move after mounting. If oven isn’t mounted in accordance with instructions, there is a risk of tilt over during operation.

Electrical Connection
Mounting place of the product must have appropriate electrical installation. Network voltage must be compatible with the values provided on type label of product. Product connection must be made in accordance with local and national electrical requirements. Before starting the mounting disconnect network power. Do not connect the product to network until its mounting is completed.

Mounting

CONTROL PANEL

1. Function button
2. Mechanical or digital timer
3. Thermostat

Thermostat Button : Helps to set cooking temperature of the food to be cooked in the oven. You can set the desired temperature by turning the button after placing the food into the oven. Check cooking table related to cooking temperatures of different foods

Mechanical Timer Button *: Helps to set time for the food to be cooked in the oven. Timer de-energizes the heaters when set time expires and warns you by ringing. See cooking table for cooking times.

**Using Pop-up Button ***
Adjustment can be made only when button is popped for models with pop-up button

• Make sure that button is popped by pressing on the button as shown in the figure at left side.
• You can make necessary adjustments by turning right or left when button is popped enough.

USING THE OVEN

Initial Use Of Oven

1. Remove labels or accessories attached inside the oven. If any, take out the protective folio on front side of the appliance.
2. Remove dust and package residues by wiping inside of the oven with a damp cloth. Inside of oven must be empty. Plug the cable of appliance into the electrical socket.
3. Set the thermostat button to the highest temperature (240 Max. °C) and run the oven for 30 minutes with its door closed. Meanwhile a slight smoke and smell might occur and that’s a normal situation.
4. Wipe inside of the oven with a slightly warm water with detergent after it becomes cold and then dry with a clean cloth. Now you can use your oven

Normal Use Of Oven

1. Adjust thermostat button and temperature at which you want to cook the food to start cooking.
2. You can set cooking time to any desired time by using the button at models with mechanical timer. Timer will de-energize heaters when time expired and provide warning beep as ringing.
3. Timer turns the heaters off and provides audible signal when cooking time expires in line with the information entered in the models with digital timer.
4. Cooling system of the appliance will continue to operate after cooking is completed. Do not cut the power of appliance in this situation which is required for appliance to cool down. System will shut down after cooling is completed.

Using The Grill

1. When you place the grill on the top rack, the food on the grill shall not touch the grill.
2. You can preheat for 5 minutes while grilling. If necessary, you may turn the food upside down.
3. Food shall be in the center of the grill to provide maximum air flow through the oven.

To turn on the grill;

1. Place the function button over the grill symbol.
2. Then, set it to the desired grill temperature.

To turn the grill off;
Set the function button to the off position.

WARNING : Keep the oven door closed while grilling.

*Using The Chicken Roasting
** Place the spit on the frame. Slide turn spit frame into the oven at the desired level. Locate a dripping pan through the bottom in order to collect the fast. Add some water in dripping pan for easy cleaning.Do not forget to remove plasticpart from spit. After grilling, screw the plastik handle to the skewer and take out the food from oven

PROGRAM TYPES
Program Button Helps to set with which heaters the food placed in oven will be cooked. Heater program types in this button and their functions are stated below. Every model might not have all heater types and thus program types of these heaters.

Heating program types in your appliance and important explanations of them are provided below for you can cook different foods appealing to your taste.

1. Lower heating element: Select this program towards end of cooking time if lower part of the food cooked will be roasted.
2. Upper heating element : Used for post heating or roasting very little pieces of foods.
3. Lower and upper heating elements : A program that can be used for cooking foods like cake, pizza, biscuit and cookie.
4. Lower heating element and fan : Use mostly for cooking foods like fruit cake.
5. Lower and upper heating element and fan : The program suitable for cooking foods like cakes, dried cakes, lasagne. Suitable for cooking meat dishes, as well.
6. Grill : Grill cooker is used for grilling meat like foods such as steak, sausage and fish. While grilling, tray should be placed in the lower rack and water must be placed in it.
7. Turbo heater and fan : Suitable for baking and roasting. Keep heat setting lower than “Lower and Upper Heater” program since heat is conveyed immediately via air flow.
8. Grill and fan : Suitable for cooking meat type foods. Do not forget to place a cooking tray in a lower rack inside the oven and a little water in it while grilling.
9. Multi Functional Cooking (3D) : Suitable for baking and roasting. Lower and upper heaters operate as well as quick transmission of heat via air flow. Suitable for cooking requiring single tray and intense heat.

COOKING RECOMMENDATIONS
You can find in the following table the information of food types which we tested and identified their cooking values in our labs. Cooking times can vary depending on the network voltage, quality of material to be cooked, quantity and temperature. Dishes to cook by using these values might not appeal to your taste. You can set various values for obtaining different tastes and results appealing to your taste by making tests.

WARNING: Oven must be preheated for 7-1C) minutes before placing the food in it.

Cooking Table

MFA1-6….. :

Food| Cooking function| Cooking temperature (°C)| Cooking rack| Cooking time (min.)
---|---|---|---|---
Cake| Static / Static+fan| 170-180| 2-3| 35-45
Small cake| Static / Turbo+fan| 170-180| 2| 25-30
Pie| Static / Static+fan| 180-200| 2| 35-45
Pastry| Static| 180-190| 2| 20-25
Cookie| Static| 170-180| 2| 20-25
Apple pie| Static / Turbo+fan| 180-190| 1| 50-70
Sponge cake| Static| 200/150 | 2| 20-25
Pizza| Static fan| 180-200| 3| 20-30
Lasagne| Static| 180-200| 2-3| 25-40
Meringue| Static| 100| 2| 50
Grilled chicken | Grill+fan| 200-220| 3| 25-35
Gr lled fsh | Grill+fan| 200-220| 3| 25-35
Calf steak | Grill+fan| Max| 4| 15-20
Grilled meatball | Grill+fan| Max| 4| 20-25
Food| Cooking function| Cooking temperature (°C)| Cooking rack| Cooking time (min.)
---|---|---|---|---
Cake| Static / Static+fan| 170-180| 2-3| 30-35
Small cake| Static / Turbo+fan| 170-180| 2-3| 25-30
Pie| Static / Static+fan| 180-200| 2-3| 30-35
Pastry| Static| 180-190| 2| 25-30
Cookie| Static / Turbo+fan| 170-180| 2-3| 20-30
Apple pie| Static / Turbo+fan| 180-190| 2-3| 40-50
Sponge cake| Static / Turbo+fan| 200/150 | 2-3| 25-30
Pizza| Static / Turbo+lower| 180-200| 3| 20-30
Lasagne| Static| 180-200| 2-3| 20-25
Meringue| Static / Lower-upper+fan| 100| 2-3| 60-70
Grilled chicken | Grill / Lower-upper+fan| 200-220| 2-3| 25-30
Gr lled fsh | Grill| 190-200-220| 3-4| 20-25
Calf steak | Grill| 230| 5| 25-30
Grilled meatball | Grill| 230| 5| 20-35

Do not preheat. First half of cooking time is recommended to be at 200 °C de while the other half at 150 °C.Food must be turned after half of the cooking time.

Baking With Pizza Stone
When baking with pizza stone, place pizza stone over wire rack and pre-heat the oven in pizza mode (turbo + lower) at 230 °C for 30 minutes. Once pre- heating is completed, without removing pizza stone put pizza over it with the peel (do not place frozen pizza) and bake at 180 °C for 20-25 minutes. Once baking is completed, remove the baked pizza from the oven using the peel.

WARNING : Do not place pizza stone in a pre-heated oven.

WARNING: Once baking is completed, do not remove pizza stone when it is hot and do not place on cold surfaces. Otherwise, pizza stone can be cracked.

WARNING: Do not expose pizza stone to humidity.

Drying

Food

| Cooking function| Cooking temperature (°C)| Cooking rack| Cooking duration (hours)
---|---|---|---|---

Sliced banana

| ****

Fan-cooking functions

| ****

100

| ****

2

| ****

4-5

Sliced apple

| ****

Fan-cooking functions

| ****

100

| ****

2

| ****

4-5

Sliced orange

| ****

Fan-cooking functions

| ****

100

| ****

2

| ****

4-5

• WARNING : The thinner the slices, the faster the drying duration is and the aroma of the food is preserved better.
• WARNING : Do not open the oven door until the drying process is complete.
• WARNING : Drying should only be carried out in the drying tray.
• WARNING : Do not preheat during drying.

MAINTENANCE AND CLEANING

1. Remove the power plug from electrical socket.
2. Do not clean inner parts, panel, trays and other parts of the product with hard tools such as bristle brush, wire wool or knife. Do not use abrasive, scratching materials or detergent.
3. Rinse after wiping the parts at inner parts of the product with soapy cloth, then dry thoroughly with a soft cloth.
4. Clean glass surfaces with special glass cleaning material.
5. Do not clean your product with steam cleaners.
6. Never use combustibles like acid, thinner and gas while cleaning your product.
7. Do not wash any part of the product in dishwasher.
8. Use potassium stearate (soft soap) for dirt and stains.

Steam Cleaning
It enables cleaning the soils softened thanks to the steam to be generated in the oven

1. Remove all the accessories in the oven.
2. Pour a half litre of water into the tray and Place the tray at the bottom of the boiler.
3. Set the switch to the steam cleaning mode.
4. Set the thermostat to 70 °C degrees and operate the oven for 30 minutes.
5. After operating the oven for 30 minutes, open the oven door and wipe the inner surfaces with a wet cloth.
6. Use dish-washing liquid, warm water and a soft cloth for stubborn dirt, then dry off the area you have just cleaned with a dry cloth.

Cleaning And Mounting Oven Door

• Open the door fully by pulling the oven door toward yourself. Then perform unlock operation by pulling the hinge lock upwards with the aid of screwdriver as indicated
• Set the hinge lock to the widest angle as in  Adjust both hinges connecting oven door to the oven to the same position
• Later, close the opened oven door so that it will be in a position to contact with hinge lock
• For easier removal of oven door, when it comes close to closed position, hold the cover with two hands as and pull upwards.

Reversely perform respectively what you did while opening door to reinstall oven door back.

Cleaning Of The Oven Glass
Your product may differ. Follow the appropriate step for your product.

1.  Press the plastic latches on the left and right sides as shown in Figure 10 and lift the the profile by pulling it towards you as shown in Figure 11. Glass will be free after the profile is removed as shown in Figure 12. Carefully pull the glass that has become free toward you. If necessary, the middle glass can also be removed in the same way. The outer glass is fixed to the oven door profile. You may easily clean the glasses after they have been separated. Once the cleaning and maintenance is complete, you can replace the glasses and the profile by performing the removal procedure in reverse. Make sure that the glass is inserted in the correct direction and that the profile is seated properly.
2. Remove the screws on the left and right sides as shown in Figure 13. Remove the profile by pulling it towards you as shown in Figure 14. Glass will be free after the profile is removed as shown in Figure 15. Carefully pull the glass that has become free toward you. If necessary, the middle glass can also be removed in the same way. The outer glass is fixed to the oven door profile. You may easily clean the glass once it has been released. Once the cleaning and maintenance is complete, you can replace the glasses and the profile by performing the removal procedure in reverse. Make sure that the glass is inserted in the correct direction and that the profile is seated properly.

*Catalytic Panel
** It is located behind the wire racks of the oven, at the right and left walls of oven cavity. Catalytic panel removes offensive odour and provides using your appliance at its best performance. Over time, oil and food odours permeate into enamelled oven walls and heating elements. Catalytic panel absorbs any food and oil odours, and burns them during cooking to clean your oven.

Detaching catalytic panel
To remove catalytic panel; first remove the wire racks. Once wire racks are removed, catalytic panel will be free. It is advised to replace the catalytic panel once every 2-3 years.

Rack Positions
It is important to place the wire grill into the oven properly. Do not allow wire rack to touch rear wall of the oven. Rack positions a deep tray or a standard tray in the lower and upper wire racks.

Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure, first remove the lower, and than the upper side from installation location. To install wire racks; reverse the procedure for removing wire rack.

Replacing Oven Lamp

WARNING : To avoid electric shock, ensure that the appliance circuit is open before changing the lamp. (having circuit open means power is off) First disconnect the power of appliance and ensure that appliance is cold. Remove the glass protection by turning as indicated in the figure on the left side. If you have difficulty in turning, then using plastic gloves will help you in turning. Then remove the lamp by turning, install the new lamp with same specifications. Reinstall glass protection, plug the power cable of appliance into electrical socket and complete replacement. Now you can use your oven.

Type G9 Lamp

Type E14 Lamp

WARNING : This product contains a light source of energy efficiency class G.

TROUBLESHOOTING

You may solve the problems you may encounter with your product by checking the following points before calling the technical service.

Check Points
In case you experience a problem about the oven, first check the table below and try out the suggestions.

Oven does not operate.

|

Power supply not available.

|

Check for power supply.

Oven stops during cooking.

| Plug comes out from the wall socket.|

Re-install the plug into wall socket.

Turns off during cooking.

|

Too long continuous operation.

| Let the oven cool down after long cooking cycles.

Cooling fan not operating.

| Listen the sound from the cooling fan.
Oven not installed in a location with good ventilation.| Make sure clearances spec fed n

operating instructions are maintained.

More than one plugs in a wall socket.| Use only one plug for each wall socket.

Outer surface of the oven gets very hot during operation.

|

Oven not installed in a location with good ventilation.

|

Make sure clearances spec fed n

operating instructions are maintained.

Oven door is not opening properly.

| Food residues jammed between the door and internal cavity.| Clean the oven well and try to re-open the door.

Internal light is dim or does not operate.

| Foreign object covering the lamp during cooking.| Clean internal surface of the oven and check again.

Lamp might be failed.

| Replace with a lamp with same

spec fcat ons.

Electric shock when touching the oven.

|

No proper grounding.

|

Make sure power supply is grounded properly.

Ungrounded wall socket is used.

Water or steam may generate under certain conditions depending on the food being cooked. This is not a fault of the appliance.

|

Let the oven cool down and than wipe dry with a cloth.

Steam coming out from a crack on oven door.
Water remaining inside the oven.

The cooling fan continues to operate

after cooking is finished.

|

The fan operates for a certain period for ventilation of internal cavity of the oven.

|

This is not a fault of the appliance; therefore you don’t have to worry.

Oven does not heat.

|

Oven door is open.

|

Close the door and restart.

Oven controls not correctly adjusted.

|

Read the section regarding operation of the oven and reset the oven.

Fuse tripped or circuit breaker turned off.

| Replace the fuse or reset the circuit breaker. If this is repeating frequently, call an electrician.

Smoke coming out during operation.

|

When operating the oven for the

frst t me.

|

Smoke comes out from the heaters. This is not a fault. After 2-3 cycles, there will be no more smoke.

Food on heater.

| Let the oven to cool down and clean food residues from the ground of the oven and surface of upper heater.

When operating the oven burnt or plastic odour coming out.

| Plastic or other not heat resistant accessories are being used inside the oven.|

At high temperatures, use suitable glassware accessories.

Oven does not cook well.

|

Oven door is opened frequently during cooking.

| Do not open oven door frequently, if the food you are cooking does not require turning. If you open the door frequently internal temperature drops and therefore cooking result w ll be nfluenced.

HANDLING RULES

1. Do not use the door and/or handle to carry or move the appliance.
2. Carry out the movement and transportation in the original packaging.
3. Pay maximum attention to the appliance while loading/unloading and handling.
4. Make sure that the packaging is securely closed during handling and transportation.
5. Protect from external factors (such as humidity, water, etc.) that may damage the packaging.
6. Be careful not to damage the appliance due to bumps, crashes, drops, etc. while handling and transporting and not to break or deform it during operation.

RECOMMENDATIONS FOR ENERGY SAVING
Following details will help you use your product ecologically and economically.

1. Use dark coloured and enamel containers that conduct the heat better in the oven.
2. As you cook your food, if the recipe or the user manual indicates that pre-heating is required, pre-heat the oven.
3. Do not open the oven door frequently while cooking.
4. Try not to cook multiple dishes simultaneously in the oven. You may cook at the same time by placing two cookers on the wire rack.
5. Cook multiple dishes successively. The oven will not lose heat.
6. Turn off the oven a few minutes before the expiration time of cooking. In this case, do not open the oven door.
7. Defrost the frozen food before cooking

ENVIRONMENTALLY-FRIENDLY DISPOSAL
Dispose of packaging in an environmentally-friendly manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the frame work for the return and recycling of used appliances as applicable throughout to the EU.

PACKAGE INFORMATION
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities Aftersales service information
on the leaflet inside this instruction manual.PKM GmbH & co. KG, Neuer Wall 2, 47441 Moers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>