infobit MD30 iSpeaker User Guide
- June 10, 2024
- infobit
Table of Contents
MD30 iSpeaker
User Guide iSpeaker MD30 Quick Guide
MD30 iSpeaker User
Thank you for choosing this device. The following guidelines will give you a
quick overview of how to use this product.
Cautions
To ensure reliable use of the equipment and the safety of personnel, please
observe this guide during installation, use and maintenance.
-
When install the equipment, make sure the power cord and the chassis are well grounded.
-
Keep the working environment well ventilated, so that the heat generated by the equipment can be discharged in time to avoid high temperature and damage to the equipment.
-
In a humid and dewy environment or when not in use for a long time, the main power supply should be turned off.
-
Be sure to unplug the AC power cord from the power supply outlet before the following operations.
– Remove or reassemble any part of the equipment.
– Disconnect or reconnect any electrical plugs or connections to the equipment. -
Do not disassemble the equipment without permission from non-professionals to avoid the risk of electric shock. Do not repair the equipment privately to avoid aggravating the degree of damage.
-
Do not spill any corrosive chemicals or liquids on or near the equipment.
Equipment information
The iSpeaker MD30 is a DANTE (AES67) interface microphone that enables the conversion of analog audio signals to digital audio signals for long-distance transmission via the DANTE interface. The microphone is powered via POE (IEEE 802.03af).
-
Dante interface with POE function
POE power and DANTE audio output -
Pushbutton Switches
Turning the microphone on or off -
Gooseneck Microphone
For sound pickup -
Volume adjustment knob (at bottom)
Adjustable range: 0dB-23dB
Equipment parameters
| Components | Electret condenser microphone core |
|---|---|
| Sensitivity | -40d BV /Pa |
| Directio0ality | Heart-shaped single pointing |
| Frequency Response | 20Hz-20KHz |
| Output Impedance | 280 Ohm |
| Maximum sound pressure | 140dB, THD<1% |
| Signal-to-noise ratio | >92dB |
| Power supply method | 11-52v phantom power, 2mA POE powered IEEE802.3af/at/bt |
| Input Connector | 4-pin airline plug male connector |
| Output Connector | 4-pin male XLR connector |
| Size | Microphone pole: 388.7mm Base: 134.6x100x58.2mm |
Equipment size
Equipment operation
- Connect the device correctly
- Control DANTE audio routing with Dante Controller
- Turn the microphone on or off with the microphone switch
Packaging Details
| iSpeaker MD30 | Quick Guide |
|---|---|
| 1 pcs | 1 pcs |
Warranty Card
Date of shipment……………
Product Model………………..
Fuselage no………………….
Distribution…………………..
CONTACT US
INFOBIT AV
www.infobitav.com
info@infobitav.com
References
- infobit AV- 4K Matrix Switchers, Wireless Presentation, Active Optical Cable and Conference Camera- Meeting Room Solutions
- infobit AV- 4K Matrix Switchers, Wireless Presentation, Active Optical Cable and Conference Camera- Meeting Room Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>