SYTECH SY-XTR69LF Wireless Party Speaker User Manual

: June 10, 2024
: Sytech

SYTECH SY-XTR69LF Wireless Party Speaker

SYTECH-SY-XTR69LF-Wireless-Party-Speaker-PRODUCT-IMG

Welcome to the Wireless Party Speaker SY-XTR69LF Ledflow Series

Thank you for choosing our product! This user manual will guide you on how to safely and effectively use your new wireless party speaker. Please read the instructions carefully before operating the product and keep this manual in a safe place for future reference.

Safety Precautions

Please observe the following points for safe usage:

Read the user manual carefully before using the product.
Turn off the device immediately in case of a problem. Return it to your authorized SYTECH dealer for repairing.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, dampen the cloth with water only. Do not use any other cleaning products.
Do not attempt to repair the unit yourself if you encounter any problems.
Place the unit on a flat surface with enough space around it for proper ventilation.
Do not place the product near any heat sources or direct sunlight.
Use only supplied accessories.

Product Cleaning

To clean the product, use a soft dry cloth for periodic cleaning. For more severe stains, slightly dampen the cloth with water only. Do not use any other cleaning products such as alcohol or benzene as they may damage the paint or plastic.

Parts and Accessories

The speaker includes the following parts and accessories:

Mode/Shift/TWS function
Record & Delete function
RGB light function
Ear mic Input
AUX input
DC adaptor input
Battery indicator light
Power On/Off button
Mic1-Mic2 input
Sound Effect 1 & 2
Sound Effect 3 & 4
Indoor/Outdoor mode
Microphone voice effects
Microphone priority function
Vocal cut function
Bass control knob
Microphone volume
Echo level control
Remote control sensor

Precautions on Handling the Battery

Please keep the following precautions in mind when handling the battery:

Charge the speaker only when the battery is completely drained out. Do not charge the battery when it is still charged as this would cause the battery lifetime to decrease.
Do not charge the speaker’s built-in battery in places where the speaker is likely to have water splashed on it.
If you do not intend to use the speaker for a long time, charge the built-in battery sufficiently once every 3 months to maintain its performance.

Using the Remote Control

The remote control has the following buttons:

Power On/Off button
Mute
Repeat function
Mode
FM Scan
EQ
Tune back (-)
Tune forward (+)
Increase Volume (+)
Decrease Volume (-)
Previous
Next
Pay/Pause
Numeric Keys

To operate the remote control, aim it at the infrared receiver window of the unit and ensure that there are no obstacles between the remote control and the unit.

Important Note on FM Radio Mode

This product contains multiple LED lights which can cause interference while on FM radio mode. To provide clear and stable FM signal reception, turn off the LED button. When listening to the radio, some FM stations may not be clear. It is recommended to use a radio APK to listen via Bluetooth your favorite FM stations.

Welcome

Thank you for purchasing the new Wireless party speaker SY-XTR69LF “Ledflow” series”. Please read this manual carefully before operating your product and pay close attention to the precautions which are mentioned below. Store this user manual in a safe place for future reference.

Safety Precautions

Points to observe for safe usage
Read this manual carefully before using the product. They contain instructions on how to use this product in a safe and effective manner. SYTECH will not be responsible for problems resulting from failure to observe the instructions in this manual.

Turn off the device immediately in case of a problem.

Failure may cause personal injury or damage to the product.
Return it to your authorized SYTECH dealer for repairing.

Product cleaning
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Any other product such as alcohol, benzene, may damage the paint or the plastic.

Temperature
Make sure before using the product, the room temperature is between +35ºC (+95ºF) and – 10ºC (+14ºF)

Maintenance
If you have problems, do not attempt to repair the unit yourself.

Surface

Place the unit on a flat surface.
Leave enough space around the unit for a proper ventilation.

Heat
Do not place the product near any heat sources or to direct sunlight.

Accessories
Use only supplied accessories

IMPORTANT

THIS PRODUCT CONTAINS MULTIPLE LED LIGHT WHICH CAN CAUSE INTERFERENCE WHILE ON FM RADIO MODE. TURN OFF THE LED BUTTON TO PROVIDE A CLEAR AND STABLE FM SIGNAL

RECEPTION

WHEN LISTENING TO THE RADIO, SOME FM STATIONS MAY NOT BE CLEAR. IT IS RECOMMENDED TO USE A RADIO APK TO LISTEN VIA BLUETOOTH YOUR FAVOURITE FM STATIONS.

Precautions on handling the battery

This unit has a built-in rechargeable lithium battery. (11.1V/6.0 Ah)
Do not use the battery in a closed room or near fire.
Charge the battery under the charging condition specified.
If any corrosion of the terminals, leakage, or deformation of the case of the battery is found, do not use the battery.
If the battery leaks, while protecting your hands or clothing, remove the battery from the device and should be extremely careful not to infect the skin or eyes.
If the battery leaks and the liquid inside spills on the skin or clothing, immediately wash it off with plenty of clean water. If the liquid splashes into eyes, immediately flush the eyes with plenty of clean water and consult a doctor.
Avoid mixed usage of batteries differing in type, manufacturer or history of use.
Do not throw the battery in fire nor heat the battery.
Do not attempt to disassemble, remodel or destroy the battery.
Do not place the battery near a child.
The battery is a component which after some time of usage loses its capacity, so it is important to take good care of it. The warranty for the battery is of 6 months since it is a component that is limited to a maximum cycle of charges.
Charge fully before storing a battery which has not been in use for a long period and turn ON/OFF switch off.

Charging the speaker

Connect the AC adaptor input connector to your speaker.
Plug in the AC adaptor into the wall outlet.
The battery indicator LED light will turn red indicating the battery is being charged.
Once the battery is fully charged, the LED light will turn blue.
Disconnect the AC adaptor and start using your speaker with the batteries.

NOTE
Make sure to charge your speaker only when the battery is completely drained out. Do not charge the battery when it is still charged as this would cause the battery lifetime to decrease.

IMPORTANT
The maximum power output will be lower when the built-in battery is running low. In an extremely cold or hot environment, charging stops for safety. If charging takes a long time, it also makes charging of the speaker stop. To resolve these issues, disconnect the supplied AC power cord (mains lead), and then connect it again within an operating temperature between 5 °C and 35 °C (41 °F and 95 °F).Do not charge the speaker’s built-in battery in places where the speaker is likely to have water splashed on it. The supplied AC power cord (mains lead) as well as the jacks and ports (AC IN/USB/AUDIO IN/MIC) these are not designed for water resistant. Even if you do not intend to use the speaker for a long time, charge the built-in battery sufficiently once every 3 months to maintain its performance.

Parts and Accessories

Speaker

SYTECH-SY-XTR69LF-Wireless-Party-Speaker-FIG-1

LED display
Volume control
Micro-SD port
USB slot
Previous Track / Previous FM Station
Play /Pause /Repeat – FM Auto search
Next Track / Next FM Station
Mode/Shift/TWS fun ction
Record & Delete function
RGB light function
Ear mic Input
AUX input
DC adaptor input
Battery indicator light
Power On/Off button
Mic1-Mic2 input
Sound Effect 1 & 2
Sound Effect 3 & 4
Indoor/ Outdoor mode
Microphone voice effects
Microphone priority function
Vocal cut function
Bass control knob
Microphone volume
Echo level control
Remote control sensor

Remote control

Power On/Off button
Mute
Repeat function
Mode
FM Scan
EQ
Tune back (-)
Tune forward (+)
Increase Volume (+)
Decrease Volume (-)
Previous
Next
Pay/Pause
Numeric Keys
Under normal circumstances, the remote control should be aimed directly at the infrared receiver window of the unit.
The maximum distance for the remote-control operation is approximately 6 meters and within a 30° angle.
When operating the remote control, aim the remote control at the infrared receiver window of the unit and ensure that there are no obstacles between the remote control and the unit.
If the remote receiver is facing direct sunlight, it may fail. In this case, move the speaker away to avoid the light.
Avoid mixing old and new batteries. Replace the remote-control batteries regularly.

Bluetooth Function

Select the Bluetooth mode by pressing the “MODE” button on the top panel of the unit or from the remote control itself.
Please ensure the BT devices you wish to connect has the Bluetooth function enabled and visible.
Start the scan function from your device and search for “SY-XTR69LF”.
Once you have found the device, select it and connect the speaker with the device.
When the connection is successful, a “tick” tone will be heard. If the speaker can’t be connected, please restart the speaker or the device and try again.
After the connection is successfully established, you can begin to play music. To ensure continuous stability of the music signal, try to keep the BT device and the mobile phone facing one another.
The maximum range of distance in Bluetooth mode is approx. 10 meters without barriers.

USB & Micro-SD Slot

USB FUNCTION

Make sure your USB flash is formatted as FAT32.
Insert the USB flash into the USB port of the speaker system.
The unit should detect the USB automatically and play the first track.
If in the case the USB does not start automatic playback, press the MODE button and select MP3 mode.
If you wish to pause the music, simply press the pause button.
To select the next track, simply press the “Next” button.
To select the previous track, simply press the “Previous” button.

NOTE

Make sure the music files are MP3, WAV format or else the music system will not be able to read the files.
Make sure the music files are recorded to the root directory.
It is advisable to remove unnecessary files for faster reading of the content.

MICRO-SD CARD FUNCTION

Make sure your Micro-SD card is formatted as FAT32.
Insert the Micro-SD card into the TF slot of the speaker system.
The unit should detect the Micro-SD card automatically and play the first track.
If in the case the Micro-SD card does not start automatic playback, press the MODE button, and select MP3 mode.
If you wish to pause the music, simply press the pause button.
To select the next track, simply press the “Next” button.
To select the previous track, simply press the “Previous” button.

FM Radio Function

This speaker includes a built-in antenna for a better FM reception. However due to the multiple LED bulbs the speaker under FM mode might not have a clear sound or may have interference. In this case try moving the unit to another position and try placing it near a window or an open area.

Press the “MODE” button to switch to FM mode.
Press and hold the “Pause/Play” button to start the automatic search of the stations.
The unit will start to search all the main stations and will store them automatically.
Once the scan search has finalized, press the “NEXT” or “PREVIOUS” buttons to access to the stored channels.
The unit will store up to 40 presets.

IMPORTANT: When playing the radio, it is important to switch off the LED lights as this will cause interference on the radio reception.

NOTE: The FM stations can only be stored automatically. The position of the channel store number will start from the lowest FM frequency to the highest. The pre-set memories cannot be memorized manually.

TWS Function

The TWS function allows you to connect two speakers at the same time and lets you enjoy “True Wireless Stereo” music.

Select the Bluetooth mode on the two speakers.
Long press the “TWS” button during 3 or 4 seconds on one of the speakers.
A beep sound will be heard confirming the pairing of the two speakers.
Connect your mobile device via Bluetooth the speaker.
Play the track from your mobile device and enjoy True Wireless Stereo experience as each speaker will act as left and right.
To exit the TWS mode, simply long press the “TWS” button.

Recording and Deleting Files

RECORDING FUNCTION

Before recording make sure the inserted USB/TF Card is formatted as FAT32.
Connect the wired microphone to the MIC1 input. If in the case you wish to connect a second microphone, use the MIC 2 input.
Turn the echo effect to the minimum level to obtain a better-quality recording.
Press the REC/DEL button once to start recording.
Once finished, press the button once again to stop the recording.
The recorded files will be saved on the USB or TF card.

NOTE: While recording, the music, sound effects as well and the vocal cut effects will not operate.

DELETING A FILE

Access the file you want to delete from the USB or TF card
To delete a recorded file, press and hold the REC/DEL button.
Your file will be deleted.

Wired Microphone Usage

CONNECTING THE MICROPHONE

Connect the supplied wired microphone to the MIC 1 input jack located on the top panel of the speaker (16).
To control the volume of the MIC, turn the knob MIC (24) clockwise to increase volume or anti-clockwise to decrease the volume.

VOCAL CUT

The Vocal Cut function is best used for karaoke.
Make sure your microphone is connected to the speaker.
Play a song from your device via Bluetooth, USB and then short press the Vocal cut button (22).
This function cancels the original vocal track on the song, keeping only the instrumental.
Enjoy singing with your favorite instrumental songs.

MIC PRIORITY

The Mic Priority function enables you to talk on the microphone whilst music is playing. The music track volume will automatically lower down when speaking making it easier for the crowd to hear you.
Connect the microphone to the speaker.
Short press the Mic Priority function (21).
Now Mic priority function is enabled.
Press it one more time to disable the function.

MICROPHONE SOUND EFFECTS

This function allows you to transform your voice when speaking from the microphone. Variable sound effect Are available as below:
Normal voice
Man’s voice
Girl’s voice
Kids voice
Old man’s voice

To enable this function just short press the Microphone Sound Effects button (20). Keep on pressing to cycle between the different sound effects.

Repeat Function

The repeat function has 4 different modes:

ALL- Play all the tracks in sequence order.
RAND- Play tracks in a randomized order.
ONE- Repeat one track.
FOL- Repeat all the tracks in the folder

Indoor / Outdoor Modes

The Indoor/Outdoor mode is used when switching the speaker from a closed environment to an open environment.

Press once to switch to outdoor mode. The music playing will then have the “outdoor scene sound effect” on. “OUT” will appear on the LED display.
Press again to switch to indoor mode. The music playing will then have the “indoor scene sound effect” on. “IN” will appear on the LED display.

Sound Effects

The speaker includes 4 programmed sound effects. Short press or long press the buttons to switch between the following effects:

Opening
Laughter
Applause
Awkward

Technical specifications

Basic Specifications

High resistant material finishing
Bluetooth & TWS function
FM tuner with preset memory stations
LED display indicating track number
RGB flame lights integrated on the speaker
Recording function & Mic priority
Aux in feature
Rechargeable battery
Remote control
Wired microphone

Bluetooth Specifications

Bluetooth Module: AB5301A
Bluetooth Version: V5.0 + EDR
Bluetooth Support: 5.0
Bluetooth Profiles: A2DP, AVRCP
Bluetooth Pairing name: SY-XTR69LF

USB/TF card Specifications

2.0 USB Port (Max Capacity : 32GB)
TF Card Slot (Max Capacity: 32GB)
Compatible Audio Formats in USB: MP3/WAV
Compatible Audio Formats in TF: MP3/WAV

Technical Specifications

RMS Output power: 60W
PMPO output power: 135W
SNR: ≥125dB
Frequency response: 100Hz-20 kHz
Battery capacity: 6000mAh – 11.1V
Power supply: AC100V- AC240V, 60Hz/50Hz
DC 13.5V- 1.5A · 2 ways speakers: 2 x 6.5” Woofer 1 x 1.5” tweeter
Weight: 7.7 Kg
Dimension: 26 x 25,8 x 60 cm.

NOTE: Above specifications are the specifications of SY-XTR69LF “Ledflow Series” and are for reference purpose only. Due to continuous product development, specifications may be subject to change without prior notification. Do not expose to adverse weather conditions (Such as rain or high temperatures) as it can cause malfunctions.