Baseus F01A Creator Wireless Mouse User Manual
- June 10, 2024
- Baseus
Table of Contents
Baseus F01A Creator Wireless Mouse
Baseus Creator Wireless Mouse
User Manual: Before using the product, thoroughly read this manual. Keep
the manual for future reference.
Overview
- Left button
- Right button
- Scroll wheel
- DPI button
- DPI: 1600DPI
- Press DPI button to change the mouse sensitivity (DPI)
- Note: 1600DPI mouse sensitivity by default.
- ON/OFF button
- Indicator
- USB receiver
Connection Steps
- Battery Installation:
- Open the cap and install the batteries inside (make sure the polarities are connected properly), and close the cap.
- 2.4G Mode Connection:
- Turn on the mouse, and take out the USB receiver on the back.
- Connect the receiver to the device.
- Switch to the connection mode to 2.4G.
- Click and move the mouse until the cursor shows up on the screen.
Specifications
- Name: Baseus Creator Wireless Mouse
- Model No.: F01A
- Transfer Distance: 20m
- Connection Type: 2.4G mode
- Sensitivity: 800/1000/1600DPI
- Response Frequency: 250Hz
- Compatible Systems: Windows, HarmonyOS, Apple OS, Linux, Vista, etc.
- *The above data are measured by the Baseus laboratory, the actual use can be slightly different depending on the specific circumstances.
Warnings
- The product contains battery inside, DO NOT expose the product to fire sources, high temperature, may cause fire or damage the product.
- DO NOT immerse the product in water, consumers should be held liable for any malfunction or damage caused by water ingress.
- Consumers are liable for any physical and property damage due to any improper use of the product not mentioned herein.
Content
- Related ICONS, product enforcement standards, product safety warnings, and additional vendor information
- Manufacturer: Shenzhen Baseus Technology Co., Ltd.
- Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,Gangtou Community, Bantian Street, Longgang District, Shenzhen.
- Executive standard: GB4943.1-2011
- Tel: 4000-712-711
- Website: www.baseus.com
- CMIIT ID: XXXXXXXXX
Product Information
The Baseus Creator Wireless Mouse is a wireless mouse that comes with a left
button, right button, scroll wheel, DPI button, DPI of 1600DPI, ON/OFF button,
indicator, and USB receiver. The transfer distance of the mouse is 20m and it
operates on 2.4G mode. The mouse sensitivity ranges from 800 to 1600DPI and
has a response frequency of 250Hz. The mouse is compatible with various
systems such as Windows, HarmonyOS, Apple OS, Linux, Vista, etc.
Product Usage Instructions
Before using the Baseus Creator Wireless Mouse, thoroughly read the user
manual provided with the product. To connect the mouse to your device, first,
install the batteries inside the mouse (make sure that the polarities are
connected properly) and switch on the mouse. Take out the USB receiver from
the back of the mouse and connect it to
your device. Switch to 2.4G connection mode and click and move the mouse until
the cursor shows up on the screen. To change the sensitivity of the mouse
(DPI), press the DPI button. Note that 1600DPI is the default mouse
sensitivity. Avoid exposing the product to high temperatures or fire sources
and do not immerse it in water. Consumers should be held liable for any
malfunction or damage caused by water ingress.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>