ANKER 552 USB-C Hub User Manual

: June 10, 2024
: Anker

Table of Contents

At a Glance
Specifications
Important Safety Instructions
Customer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER 552 USB-C Hub User Manual

At a Glance

1. USB-C Connector	Connects to a computer via USB-C port
2. USB-C 3.2 Gen 1 Port	5Gbps data transfer
3. USB-A 2.0 Port	480 Mbps data transfer
4. Power Indicator	Turns white when connected to a laptop
5. SD / microSD Card Slot

UHS-I, 104 MB/s
The SD 3.0 card slot lets you insert an SD 3.0 card to copy files to and from your device

6. HDMI Port| Supports up to 4K@30Hz output to a single display
7. Ethernet Port| Connect to a router or modem at 10/100/1000 Mbps
8. USB-A 3.2 Gen 1 Port| 5Gbps data transfer
9. PD-IN Port|

Connects to a Power Delivery charger (not included)
Supports up to 100W input

Specifications

Supported Systems: Windows 10/11, macOS 10.14 and above, Chrome OS

Important Safety Instructions

Avoid dropping.
Do not disassemble.
Do not expose to liquids
For the safest and fastest charge, use original or certified cables.
This product is suitable for moderate climates only.
The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
Open flame sources, such as candles, must not be placed near this product.
Only use a dry cloth or brush to clean this product.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party contract for EU matters:
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany

GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with the following Directives:

The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & Electromagnetic Compatibility Regulations 2016

The full text of the GB declaration of conformity is available at the following internet address:

https://www.anker.com.

The following importer is the responsible party contract for UK matters:
Anker Technology (UK) Ltd
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The following importer is the responsible party contract for FCC matters:
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973

IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).