Jan Auto Sport Baby Walker Samuel Instructions

June 10, 2024
Jan

Jan Auto Sport Baby Walker Samuel Instructions

Jan Auto Sport Baby Walker Samuel Instructions “AUTO SPORT” WALKER
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Your child may be hurt if you do not follow the instructions.

WARNING

  • Never leave the child unattended.
  • The child will be able to reach further and move rapidly when in the baby walking frame.
  • Prevent access to stairs, steps and uneven surfaces.
  • Guard all fires, heating and cooking appliances.
  • Remove hot liquids, electrical cables and other potential hazards from reach.
  • Prevent collisions with glass in doors, windows and furniture.
  • This walker is designed to be used by children who can sit up unaided, from about 6 months. It is not suitable for children who weight over 12 kg.
  • This walker must only be used for short periods of time (e.g. 20 minutes).
  • Do not use the walker if any component is broken or has been lost.
  • Do not use spare parts other than those authorised by the manufacturer or di

INSTRUCTIONS OF USE

UNFOLDING THE WALKER AND ASSEMBLING THE WHEELS Open the walker, raising the upper tray until it has reached the highest position, until you hear the safety “click”. To install the wheels place the walker on a hard surface, press the wheels firmly to slot them into their respective holes which are located on the corners below the lower base until you hear the safety “click”.

LOWER STOPPERS

Fit the 8 stoppers under the lower base. Fit the 2 supports of each stopper into the corresponding holes under the lower base and insert it COMPLETELY into the holes, otherwise the stoppers will touch the floor and hinder the movement of the walker.

Jan Auto Sport Baby Walker Samuel Instructions - LOWER
STOPPERS

FITTING THE 4 UPPER WHEELS

Fit the inner hole of each of the 4 upper wheels onto the supports of the upper base and press inwards until fully inserted (you will hear the safety CLICK when they are locked into place).

FITTING THE WING MIRROR

Slot the wing mirror into the hole and press downwards until fully inserted (you will hear the safety CLICK when it is locked into place).

ASSEMBLING THE COVER

Front fastening Slot the front plastic cover supports into the front holes on the upper base and press the cover down until it fits perfectly.

Backrest fastening Insert the plastic supports into the holes on the upper tray by pushing until it fits perfectly. Check that all the supports are completely secured.

ADJUSTING THE HEIGHT OF THE WALKER

To adjust the walker to the height you want, hold the upper part with one hand and with the other unlock the safety switch located below the upper tray, turning it 90° and pressing upwards until you reach the desired height.
Warning – Do not adjust the height of the walker while the child is in it.

Jan Auto Sport Baby Walker Samuel Instructions - ADJUSTING THE HEIGHT OF THE
WALKER

INSTALLING THE ACTIVITY TRAY

Insert 2 AA (1.5V) batteries as indicated on the cover. To change the batteries: -Remove the screw and cover, then take out the old batteries. -Insert 2 AA (1.5V) batteries as indicated on the cover. -Close the cover and tighten the screw correctly.
Jan Auto Sport Baby Walker Samuel Instructions - INSTALLING THE ACTIVITY
TRAY

WARNING:
-Attention! The batteries must only be changed by an adult.
-Keep batteries away from children at all times.
-Batteries or rechargeable batteries must be set up by respecting the polarity.
-Do not mix new and used batteries or rechargeable batteries. Do not mix battery types.
-Non rechargeable batteries must not be recharged.
-Rechargeable batteries must be removed from the toy before charging wherever possible.
-Rechargeable batteries should only be changed under adult supervision.
-Remove used batteries or rechargeable batteries from the toy.
-Do not short circuit battery terminals.
-Keep packaging outside the reach of children.
-Keep these instructions for future reference.
-The activity tray should be assembled by an adult.

This electronic device must be recycled according to the directive 2002/96/CE. All electrical or electronic apparatus must be correctly disposed of in collection points designated by local authorities.

MAINTAINING THE WALKER

Cleaning the walker: Clean the plastic parts with a damp cloth, soap and water. Washing the cover: Wash it by hand and leave it to dry at room temperature.

GUARANTEE INFORMATION

– This item is guaranteed against manufacturing defects as stipulated in the legal Directives and/or regulations in force on guarantees for consumer goods applicable to the European Union and those of the country in which it is marketed.
– It is essential to present the purchase invoice or receipt in order to process the guarantee through the seller of the item or, failing that, through the manufacturer.
– The guarantee excludes anomalies or faults caused by misuse, non-compliance with the safety regulations and instructions for use and maintenance provided, or due to wear and tear caused by normal use and regular handling of the item.
– The label containing the serial number of your model must not be torn off under any circumstances as it contains information relevant to the guarantee.

HANE, S.A
Pol. Industrial Riera de Caldes
C/. Mercaders, 34
08184 Palau de Plegamans – BARCELONA-ESPANA
Tel. + 34 93 703 18 00 Fax. +34 93 703 1804
www.janeworld.com

IM 1998,02
MADE IN TAIWAN
EN 1273 : 2020 FABRICADO

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals