HYUNDAI Solitude Headphones User Manual
- June 10, 2024
- HYUNDAI
Table of Contents
HYUNDAI Solitude Headphones
HYUNDAI Solitude Headphones – User Manual
Product Information:
The HYUNDAI Solitude headphones are professional noise cancelling headphones that provide a quiet listening experience by eliminating low frequency noise. The headphones can be connected to devices via Bluetooth or with a wired connection using the included audio cable. The headphones come with a USB-C port for charging and feature an active noise cancellation control button, a microphone for calling, and a tactile indicator on the left earmuff for easy use in the dark.
Usage Instructions:
-
Connecting via Bluetooth:
To connect the headphones to a device via Bluetooth, follow these steps: -
Put your headphones in pair mode by pressing and holding the Multifunction Button (MFB) for 2 seconds until it powers on and enters pairing mode automatically after 5 seconds. The LED indicator will flash blue and red alternately.
-
Activate Bluetooth on your device and set it to search for new devices.
-
Select “HYUNDAI Solitude” from the list of available devices.
-
If necessary, enter four zeros (0000) for the pass code and accept the connection.
-
Once successfully paired, the headphone LED indicator flashes blue.
-
Your headphone can pair with two devices simultaneously. After connecting device A, turn off the headphone and Bluetooth on device
-
Then restart the headphone and pair it with device B. Maintain the connection with device B open Bluetooth on Phone A and select
HYUNDAI Solitude in the menu.
Note: The headphone can only play music on one device even two devices are successfully connected at the same time. -
Wired Connection:
To connect the headphones with a wired connection, use the included audio cable to connect the headphones. Bluetooth turns off automatically when the audio cable is plugged in. -
Noise Cancellation:
Press the ANC button once to activate active noise cancelling, the LED turns green. Press one more time to close the ANC function, the LED will turn off. -
Charging:
To charge the headphones, plug the Micro USB into the headphone charging port and connect the other side with a USB wall charging adapter or a computer. The LED indicator turns red while charging, and when the headphones are fully charged, the LED indicator turns blue. Do not use the headphones during charging.
Key Functions:
-
Volume+/Next Track:
Press the button to volume up. Press and hold the button to play the next song. -
MFB (Multifunction Button):
Power On/Off: Press and hold 2 seconds to power on, hold 3s to power off. Phone Call Control: Press to answer or hang up. Press and hold to refuse a call. Playing music: Press to pause or stop the music. Double click to start Siri. -
Volume-/Skip Backward:
Press the button to volume down. Press and hold the button to play the previous song. -
3.5mm Earphone Jack
-
Microphone for calling
-
Active Noise Cancellation Control:
Press to turn on or off the noise control function. -
USB-C:
After inserting the charging cable, the indication light will turn red. When the headphones are fully charged, the light turns blue. (Don’t use the headphones during charging). -
Tactile Indicator:
Tactile indicator on the left earmuff enabling you to always wear it correctly. Perfect for listening in the dark.
Troubleshooting:
If the indicator blinks red quickly (interval 2s) or continuously, please refer to the user manual for further instructions on troubleshooting.
WELCOME
- Thank you for your purchasing the HYUNDAI Solitude headphones. The HYUNDAI Solitude is a professional noise cancelling headphone.
- The noise cancelling function keeps the low frequency noise out of the ear and guarantees you a quiet experience.
- This manual is to introduce the HYUNDAI Solitude headphones and list the matters that need attention.
- Before setting up or use the product, please carefully read the manual.
KEY FUNCTIONS
-
Volume+/Next Track
Press the button to volume up. Press and hold the button to play the next song. -
MFB ( Multifunction Button)
Power On/Off: Press and hold 2 seconds to power on, hold 3s to power off.
Phone Call Control: Press to answer or hang up. Press and hold to refuse a call.
Playing music: Press to pause or stop the music. Double click to start Siri. -
Volume-/Skip Backward
Press the button to volume down. Press and hold the button to play the previous song. -
5mm Earphone Jack
-
Microphone for calling
-
Active Noise Cancellation Control
Press to turn on or off the noise control faction -
USB-C
After inserting the charging cable the indication light will turn red. When the headphones are fully charged the light turns blue. (Don’t use the headphones during charging). -
Tactile indicator
Tactile indicator on the left earmuff enabling you to always wear it correctly. Perfect for listening in the dark.
INSTRUCTIONS HOW TO CONNECT
-
To put your headphone in pair mode, press and hold the MFB for 2 seconds until it powers on and enters pairing mode automatically after 5s. The LED indicator will flash blue and red alternately. ( Headphone powers off after 5 minutes if no Bluetooth device is connected)
-
Activate Bluetooth on your phone (or other devices) and set it to search for new devices.
-
Select “HYUNDAI Solitude”
-
If necessary, enter four zeros (0000) for pass code and accept connection.
-
Once successfully paired, the headphone LED indicator flashes blue.
-
two devices connection: Your headphone can pair with two devices simultaneously.
-
After connecting device A, turn the headphone and Bluetooth on device A off. Then you restart the headphone and pair it with device B. Maintain the connection with device B open Bluetooth on Phone A and select “HYUNDAI Solitude” in the menu.
Note: The headphone can only play music on one device even two devices are successfully connected at the same time. -
For wired connections use the included audio cable to connect.( Bluetooth turns off automatically when the audio cable is plugged in.)
-
Noise Cancellation
Press the ANC button one time to activate active noise cancelling, the led turns green. Press one more time to close the ANC function, the LED will turn off. -
Wired Charging: Please plug Micro USB into headphone charging port and connect the other side with USB wall charging adapter or for example a computer. The LED indicator turns red while charging, when the headphones are fully charged, the LED indicator turns blue.
-
TROUBLE SHOOTING
-
The indicator blinks red quickly(interval 2S) or continuously?
It means that the battery is low. Please charge the headphone as soon as possible. -
The headphone doesn’t turn on?
The battery is empty. Please charge it before starting. -
No indication when charging?
There may be no charging indication for the first few minutes If the battery was completely exhausted or being charged for the first time after not being used for a long period. -
Bluetooth headphone is without sound?
Make sure your device is not connected to other devices and the sound is turned on on the device. -
There is no sound in the headphone when using the wired connection?
Make sure you insert the 3.5mm audio cable correctly.
Note that the headphone buttons and microphones do not work when using the wired connection. -
Bluetooth connection is not successful?
Make sure both the headphone and the devices Bluetooth are turned on. Check the headphones indicator if it’s blinking blue to make sure the headphone entered Bluetooth pairing mode.
PRODUCT MAINTENANCE
- Please do not use non-original accessories, because it may cause performance degradation.
- Please do not disassemble the device by yourself, because it may damage the headphone and make the warranty invalid.
- Please do not put your Bluetooth headphone in a dusty environment.
- Please do not allow children under 3 years to play by themselves with the headphone.
- Please do not place the product in an overheated or super-cooled environment; otherwise it might not function temporarily or it can be damaged permanently.
- Please clean the headphone with a clean, soft and dry cloth.
- Please put your Bluetooth headphone in the original package or keep it carefully when not use it.
BATTERY MAINTENANCE
- Please go to a qualified repair center if you need to remove or replace the battery.
- Please charge the battery at least once a month if long-time no use.
- Battery usage time and standby time are related to specific using conditions.
- Usage time and standby time we provided are only for reference.
KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS IT CON-TAINS IMPORTANT INFORMATION.
- NL / EN – support@alleenonline.nl
- BE / FR – support@alleenonline.be
TIPS
Active Noise Cancelling Technology can effectively reduces the low frequency
waves (150~450Hz). It’s not able to reduce noise with a high frequency (for
example human voices).
PRODUCT SPECIFICATIONS
- Bluetooth version 5.0
- Talking time 50 hours
- Speaker 32Ω 40 mm 20-20 kHz
- Music playing time 26 – 50 hours
- Standby time 90 days
- Frequency 2.4 hz – 2.48 Khz
- Charge current 1A
- Microphone Sensitivity:-38 ±3dB
- Frequency 30-16 kHz
- Charge voltage 5 volt
- Noise cancelling Yes
- Charging time 2-3 hours
- Protocol supported HSP HFP A2DP AVRCP
- Bluetooth distance 10 meter
- Battery capacity 1050 mAh
© 2021 The Investment Company Europe B.V.
HYUNDAI logos are trademarks of HYUNDAI Corporation holdings, Korea.
Licensed to The Investment Company Europe B.V. All rights reserved.
Imported / Distributed by The Investment Company Europe B.V. Exclusively
developed for sales in Belgium, the Netherlands and Luxembourg.
PATENT PENDING
The artwork and design of this package are protected by European copyright law
and may not be reproduced, distributed, displayed, published or used for any
purpose without prior written permission. It is not permitted to alter, or
reproduce any trademarks or copyright notice from this package.
Licensed by HYUNDAI Corporation holdings, Korea
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>