Westfalia 96 72 89 Long Arm Riveter 2 in 1 for Blind Rivets and Rivet Nuts Instruction Manual

: June 10, 2024
: Westfalia

Table of Contents

Dear Customers
SAFETY NOTES
Operation
- Installation and Operation
CUSTOMER SERVICES
DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Westfalia 96 72 89 Long Arm Riveter 2 in 1 for Blind Rivets and Rivet Nuts

Dear Customers

Instruction manuals provide valuable hints for using your new device. They enable you to use all functions, and they help you avoid misunderstandings and prevent damage. Please take the time to read this manual carefully and keep it for future reference. If you pass the device on to third parties, enclose these instructions.

SAFETY NOTES

Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury:
Please read this manual carefully and use the device only according to this manual.
Dispose of used packaging material carefully or store it out of the reach of children. There is a danger of suffocation!
The device is not a toy and does not belong in the hands of children. Persons with limited physical, sensorial or mental abilities are not allowed to use the device, unless they are supervised and briefed for their safety by a qualified person. Keep the device out of the reach of children and other people who need to be supervised. The device has joints and sharp edges. Be careful not to pinch, cut, or otherwise injure yourself. Should the unit become damaged do not use it any further and have it repaired by a professional or contact our customer service. Do not disassemble the unit or try repairing it yourself.

Operation

Installation and Operation

Use for setting Blind Rivets If the accessories for setting rivet nuts are installed, equip the device with the accessories for setting blind rivets. To do this, loosen the tie rod guide (9) and the union ring (2) and remove the nosepiece (1) from the device. Be careful not to lose the spring ring in the coupling ring. Pull the knob (13) off the Counterpart (12) and push the pull rod (10) back towards the handles. Unscrew the counterpart (12) and take the pull rod (10) with spring (11) out of the device. Assemble the accessories for setting blind rivets. To do this, insert the clamping wedges (5) into the clamping sleeve (4) in such a way that they form a cone that protrudes from the sleeve to the front. That may take a few tries. Then insert the pressure piece (6) and the spring (7) into the sleeve from behind and screw the assembled clamping unit into the housing. Then place the nosepiece (1) on the housing. The nose on the housing must engage in the recess on the nose piece (1). Secure the nosepiece with the union ring (2). Make sure that the spring washer is in the coupling ring. Insert the guide (3) that matches the blind rivets into the nosepiece. Insert the collecting container (8) into the housing from behind to catch the torn pull wires. Spread the handles of the device apart and insert the pull wire of the blind rivet into the guide. The clamping unit grips the puller wire, and when the handles are brought together, the clamping unit tensions the puller wire and compresses the rivet head and tears off the puller wire when the predetermined pulling torque is reached.
Use for setting Rivet Nuts
If the accessories for setting blind rivets are installed, equip the device with the accessories for setting rivet nuts. To do this, loosen the blind rivet guide (3) and the union ring (1) and remove the nosepiece (1) from the device. Be careful not to lose the spring ring in the coupling ring. Remove the clamping unit from the housing. Be careful not to lose any of the individual parts of the clamping unit. Remove the collecting container (8) from the device. Assemble the accessories for setting rivet nuts. Insert the matching tie rod guide (9) into the nose piece (1). Push the spring (11) over the pull rod (10) and insert the pull rod into the housing from the front. Push the pull rod back against the spring and secure it by screwing on the counterpart (12). The counterpart must be mounted with the hexagon facing forward. Split the knob (13) on the counterpart. The asymmetrical end of the pull rod must engage in the recess in the knob so that the pull rod can be rotated with the knob.
To set rivet nuts, screw the rivet nut, with the device handles spread apart, the end of the pull rod protruding from the guide and push it through the mounting hole provided. Push the device forward and bring the handles together to compress the compressible part of the rivet nut. Then turn the pull rod with the knob to unscrew it from the set rivet nut.

Cleaning

Clean the device with a slightly dampened cloth. If necessary, use a little washing-up liquid as well. Do not immerse the device in liquids. Use some suitable oil to lubricate the moving parts and for protection against corrosion.
To avoid damaging the surfaces, do not use any harsh chemicals or abrasive cleaners.

Technical Data

Blind rivets sizes: 3,2 mm, 4,0 mm, 4,8 mm, 6,4 mm
Rivet nuts sizes: M3, M4, M5, M6, M8, M10, M12
Length : approx. 400 mm
M3, M4, M5, M6, M8, M10, M12 approx. 400 mm

CUSTOMER SERVICES

SCHWEIZ
Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch

DISPOSAL

Dear Customer, Please help avoid waste materials. If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.

Gestaltung urheberrechtlich geschützt 18
©Westfalia 11/21