Hcalory 30L Portable Car Fridge-Freezer Electric Compressor Cooler User Manual

Car Refrigerator
Use Manual

Applicable model EC30/40/50
NOTE: Please read this manual carefully before use to understand the function and operation requirements of the product.

Product function introduction

1. High quality DC variable frequency compressor and drive module are adopted to build a high-efficiency, energy-saving, stable and reliable mobile refrigeration system.
2. Microcomputer intelligent control system, easy to operate, accurate temperature control.
3. Innovative intelligent dual temperature zone function, freezes / refrigeration’s the space to switch at will , satisfies the different storage demand.
4. Compatible with a variety of power input, intelligent recognition of DC12/24V voltage, meet the needs of various scenes, car, marine, home, outdoor at will.
5. With the function of voltage detection and low voltage protection, it can effectively prevent the car battery from over discharging.
6. The inner container is made of grade plastic materials, which is safe, anti leakage and anti odor.
7. Built in LED lighting, more convenient to use at night.
8. High definition LED digital display.
9. Intelligent touch operation keys and keyboard child lock function to prevent false trigger.

Product Safety

• Do not touch the exposed power cord with hands.
• Do not bring water to touch the power socket and power panel, which may cause danger.
• When using this product on board, please make sure that the power supply lines and fuses have enough carrying current.
• Make sure the power connection is correct.
• Do not immerse this product in water.
• Do not put cans, beer, etc. into the refrigerator for low temperature freezing.
• Do not place any electrical equipment in the refrigerator.
• Do not expose the product to rain or strong sunlight for a long time.
• After receiving and unpacking the refrigerator, please leave it standing for more than 6 hours before power on.

Precautions for basic use

1. When using the refrigerator, please place it in a well ventilated place, which is conducive to heat dissipation. Especially, the gap between the cooling hole on the compressor side and other objects must be greater than 100 mm, so as to prevent high temperature from causing failure or affecting the refrigeration effect.
2. Please do not open the door for a long time, the temperature difference between the inside and outside of the refrigerator will be too big and frosting will affect the refrigeration effect.
3. Do not clean the refrigerator under tap water.
4. Do not use the refrigerator near the heat source, it will reduce the refrigeration performance of the refrigerator.
5. Please use the refrigerator on a flat surface. Do not use it ate large angle for a long time. It may affect the service life of the refrigerator and reduce the refrigeration efficiency.

Brief operating instructions

Temperature control range: – 20 °C ~ 20°C
Temperature display range: – 30 °C ~ 40 °C
Standard voltage input range: DC12V / 24V, maximum not exceeding DC30v

1. Refrigerator opening and closing operation:
   Connect the correct DC12 / 24 V power supply. If the refrigerator i s in standby mode, the “–” symbol will be displayed in the middle of the display screen after the refrigerator completes the self-test. At this time, long press the on / off key for 3 seconds to complete
   the start-up. After the start-up, the display screen will normally display the current temperature in the inner container, working mode and other characters. After the
   start-up delay (1 minute preset from the factory), the refrigerator works in the working mode, and the compressor starts to work for refrigeration. To turn off the refrigerator,
   press the on/ off key for 3 seconds while the keyboard is unlocked.

2. Refrigerator keyboard locking and unlocking operation:
   If the keyboard is locked (the child lock icon in the lower right corner of the display is on), press and hold the “up / down” key for 3 seconds at the same time to release the lock. If the child lock icon is not on and there is no operation for 20 seconds, it will automatically enter the keyboard lock state.

3. Refrigerator temperature setting operation:
   When the keyboard is unlocked, press the “up / down” key to adjust the temperature rise or fall of the refrigerator ( a group of temperature values on the display screen
   flicker to display the current setting value. Each time you press the key, the temperature rises or falls by 1 degree. If you hold the key, you can quickly adjust to the required temperature value. If there is no change within 5 seconds, the setting value will be saved automatically.

4. Compressor working mode setting:
   When the keyboard is unlocked, press the “set” key to freely switch the compressor working mode “eco / Max”. If you need to quickly cool to a lower temperature, switch to the “Max” mode. If you only need to refrigerate or keep warm, you can set to the “ec0” mode t o save energy and power.

5. Low voltage protection function setting:
   This product has the function of low voltage protection. When it detects that the battery voltage is lower than the set value, i t will automatically turn off the compressor to prevent over discharge from damaging the battery or causing the car unable to start normally. At this time, the display screen will display “E1” code prompt. If the voltage  returns to normal, the refrigerator will automatically enter the working state one minute later. The factory default is “medium”. If you need t o change it, please follow the following steps:
   a : Unlock keyboard
   b: Long press the “set” key for 3 seconds, release it after hearing the beep of the buzzer, and then press the “set” key for a short time. At this time, one of the battery protection level icons “L, m, H” on the display will flash, and then press the “up / down” key to change the setting. Specific value
   Refer to the table below:
   **** Battery protection| 12 V turn off| 12 V Turn on| 24V turn off| 24 V Turn on
   ---|---|---|---|---
   Low grade – L| 9.6V| 10.9V| 21.3V| 22.7V
   Medium – M| 10.4V| 11.7V| 22.8V| 24.2V
   High grade-H| 11.1V| 12.4V| 24.3V| 25.7V

Note: if your refrigerator enters the battery protection ahead of time, it is likely that your power supply voltage is insufficient and the low voltage protection value is set too high. Or your DC power supply wiring is not suitable, can not provide enough current. Check whether the power supply wiring is suitable, and consider appropriately lowering the battery protection value. In order to ensure that the car can start normally, it is recommended t o set the protection level at “H” when using the refrigerator on the car.

6. Single and double temperature zone function:
   This product has the function of automatically identifying the temperature zone.
   Inserting the middle partition, the default i s double temperature zone. The left zone is the freezing zone, and the right zone i s the cooling zone. At this time, the temperature of the freezing zone can be adjusted. Remove the diaphragm as a single temperature zone, and the temperature i s displayed as the temperature of the single  temperature zone.

Cleaning and maintenance

Before cleaning, it is necessary to disconnect the power supply and wipe the inner and outer surfaces of the refrigerator with a cleaning cloth dipped with an appropriate
amount of water or detergent. It is not allowed to wash directly with water to avoid damaging electrical components.
When the refrigerator is not used for a long time, it is necessary to clean the inside and outside of the refrigerator and keep it dry, and take moisture- proof and dust-proof measures to avoid mildew and peculiar smell inside the refrigerator.

Error code description

When the compressor, module, fan and temperature sensing head are abnormal and the input voltage is too low, the error code will appear on the display screen, and the
compressor will stop working. When the abnormality is eliminated, unplug the power supply and plug it in again, then the refrigeration mode of the compressor will start to
working 1 minute.
The code description is shown in the table below:

battery protection level
E2| DC fan over current protection| Check the cooling fan
E3| Abnormal start of compressor| Turn off the power and let it stand for 30 minutes
E4| Abnormal compressor speed| Adjust compressor operation mode (MAX/ECO)
E5| Module temperature too high| Move the refrigerator to a ventilated place to lower the module

Frequently asked questions

If the product does not work properly:

1. Check whether the power is on.
2. Check whether the voltage is too low.
3. Check all connections from battery to refrigerator for looseness or poor contact.
4. Check the fuse.
5. Check whether the refrigerator is turned on.
6. Check if the temperature set too high.

If the refrigeration performance is poor:

1. Too much food i s put in the refrigerator.
2. The temperature of the food in the refrigerator i s too high.
3. The door i s not closed properly.
4. Whether the door seal (sealing ring) i s damaged.
5. Whether the ventilation around the refrigerator is good.
6. The environment temperature is too high.
7. Incorrect temperature setting.

You can hear the sound of “water flowing” in the refrigerator.
This is normal. It is caused by the flow of refrigerant.
When the refrigerator starts, the sound is loud

1. Is the refrigerator placed on a flat horizontal surface for use.
2. Check the surrounding objects for vibration.
3. At the moment of starting the compressor, when the motor runs from static to high speed, the sound will be a little louder After the speed is stable, the sound will decrease, which is a normal phenomenon.

There are water drops around the shell or door seal
It is normal for moisture in humid air to liquefy and condense into water droplets when it comes into contact with a lower temperature shell.

Technical parameter

Standard pack ng list.

1. Car Refrigerator
2. DC cable.
3. AC cable and adapter

Recommendations for optimum storage temperature

| Purified water| 5°C
---|---|---
| Drinks| 5°C
| Fresh juice| 8-10°C
| Red wine| 13°C
| Fruits| 5-8°C
| Vegetables| 3-10°C
| Cooked Food| 4 °C
| seafood| -3°C
| meat| -18°C
| Frozen Foods| -18°C

After sales and warranty

This product from the date of purchase, if there are quality problems, the whole machine warranty for 1 year, compressor warranty 3 years, the following conditions are not within the scope of free warranty;
This product from the date of purchase, if there are quality problems, the whole machine warranty for 1 year, compressor warranty 3 years, the following conditions are not within the scope of free warranty;

• Damage caused by improper use is not covered by the warranty (if parts are purchased from other manufacturers The warranty is invalid due to the failure caused by the
  replacement of parts).

• Man made damage.

• Failure and damage caused by not following the precautions in the operation manual.

• Product failure and damage caused by self disassembly without the manufacturer’s approval.

• Damage caused by force majeure (such as earthquake, fire, etc.).

• The warranty does not cover the loss of items in the refrigerator.

• The warranty does not include fuses, connectors, sockets, handles, etc

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>