nVent WBTCBLOUT PEMSA Wire Basket Tray Cable Outlet Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent WBTCBLOUT PEMSA Wire Basket Tray Cable Outlet
Product Information
Specifications
- Catalog Number : WBTCBLOUT
- Product Type: Pemsa Wire Basket Tray Cable Outlet
- Installation : Easy and simple
- Exit Angle Adjustment: 0 to 90 degrees
Features
- Easy installation
- Allows for easy exit angle adjustment (from 0 to 90 degrees)
Product Attributes
The Pemsa Wire Basket Tray Cable Outlet (Catalog Number WBTCBLOUT) is designed to provide a convenient solution for cable management. It offers easy installation and allows for the adjustment of the exit angle from 0 to 90 degrees.
Contact Information
- North America
- Tel: +1.800.545.6258
- Fax: +1.800.527.5703
- Email : thermal.info@nvent.com
- Europe, Middle East, Africa
- Tel: +32.16.213.511
- Fax : +32.16.213.604
- Email: thermal.info@nvent.com
- Asia Pacific :
- Tel: +86.21.2412.1688
- Fax: +86.21.5426.3167
- Email : cn.thermal.info@nvent.com
- Latin America:
- Tel: +1.713.868.4800
- Fax: +1.713.868.2333
- Email: thermal.info@nvent.com
Brand Portfolio
nVent is a leading provider of thermal management solutions. Our portfolio of brands includes CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF, and TRACER.
Disclaimer
nVent reserves the right to change specifications without notice.
Product Usage Instructions
Installation
- Locate a suitable area for installing the Pemsa Wire Basket Tray Cable Outlet.
- Ensure that the surface is clean and free from any obstructions.
- Place the Pemsa Wire Basket Tray Cable Outlet on the desired location.
- Secure the outlet using appropriate screws or fasteners.
Exit Angle Adjustment
The Pemsa Wire Basket Tray Cable Outlet allows for easy exit angle adjustment.
Follow these steps:
- Identify the desired exit angle for the cables.
- Loosen the adjustment mechanism located on the outlet.
- Adjust the angle from 0 to 90 degrees as per your requirement.
- Tighten the adjustment mechanism to secure the desired angle.
Safety Precautions
Follow these safety precautions during installation and usage:
- Ensure the power source is turned off before installation.
- Do not exceed the maximum load capacity of the Pemsa Wire Basket Tray Cable Outlet.
- Avoid sharp edges while handling the product to prevent injuries.
- Consult a professional if you are unsure about any aspect of the installation process.
Maintenance
To maintain the product’s performance and longevity, follow these
maintenance guidelines:
- Regularly check for any loose screws or fasteners and tighten them if necessary.
- Inspect the cables and connections for any signs of damage or wear.
- Clean the Pemsa Wire Basket Tray Cable Outlet regularly using a soft cloth and mild detergent.
- Avoid using abrasive cleaners or solvents that may damage the product.
Troubleshooting
If you encounter any issues with the Pemsa Wire Basket Tray Cable Outlet,
refer to the troubleshooting section in the user manual or contact our
customer support for assistance.
FAQ (Frequently Asked Questions)
-
Q: Can I adjust the exit angle after installation?
A: Yes, the Pemsa Wire Basket Tray Cable Outlet allows for easy exit angle adjustment even after installation. Follow the provided instructions for adjusting the angle. -
Q: Is the installation process complicated?
A: No, the installation of the Pemsa Wire Basket Tray Cable Outlet is simple and straightforward. Follow the provided installation instructions for a hassle-free setup. -
Q: What is the maximum load capacity of the product?
A: The maximum load capacity of the Pemsa Wire Basket Tray Cable Outlet is specified in the user manual. Ensure that you do not exceed this limit to maintain product integrity and safety. -
Q: How often should I clean the product?
A: It is recommended to clean the Pemsa Wire Basket Tray Cable Outlet regularly to prevent dust accumulation and maintain its appearance. Cleaning every few months or as needed should be sufficient.
DATA-SOLUTIONS
PEMSA WIRE BASKET TRAY CABLE OUTLET, PG
CATALOG NUMBER
WBTCBLOUT
FEATURES
Enkel installation
Allows for easy exit angle adjustment (from 0 to 90 degrees)
PRODUCT ATTRIBUTES
DIAGRAMS
nVent produkter ska installeras och användas endast så som anges i nVents
bruksanvisning och utbildningsmaterial. Bruksanvisningar är tillgängliga på
www.nvent.com och från din nVent
kundtjänstrepresentant. Felaktig installation, missbruk, felapplicering eller
annan brist i att helt följa nVents instruktioner och varningar kan orsaka att
produkten brister, egendomsskador, allvarliga kroppsskador och dödsfall
och/eller ogiltigförklara din garanti.
nVent produkter ska installeras och användas endast så som anges i nVents
bruksanvisning och utbildningsmaterial. Bruksanvisningar är tillgängliga på
www.nvent.com och från din nVent
kundtjänstrepresentant. Felaktig installation, missbruk, felapplicering eller
annan brist i att helt följa nVents instruktioner och varningar kan orsaka att
produkten brister, egendomsskador, allvarliga kroppsskador och dödsfall
och/eller ogiltigförklara din garanti.
North America
Tel +1.800.545.6258 Fax +1.800.527.5703
thermal.info@nvent.com
Europe, Middle East, Africa Tel +32.16.213.511
Fax +32.16.213.604 thermal.info@nvent.com
Asia Pacific
Tel +86.21.2412.1688
Fax +86.21.5426.3167
cn.thermal.info@nvent.com
Latin America
Tel +1.713.868.4800 Fax +1.713.868.2333
thermal.info@nvent.com
Our powerful portfolio of brands
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services
GmbH or its affiliates. All other trademarks are the property of their
respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>