HELIOS SR1600 Plus Modular Inverter User Manual
- June 9, 2024
- HELIOS
Table of Contents
HELIOS SR1600 Plus User Manual
SN-1 PLUS
SNMP Module for COTEK SR Series
Introduction
Main features
- SNMP : SN-1 PLUS’s version is V2C. It can be connected to system with NMS, to set up and monitor SR-Host parameters.
- Web-Server : Using the browser to set up and monitor SR-Host parameters.
Hardware introduction
How to use Web-Server
Web-Server introduction
Main menu item description:
Note! Default login name: admin
Default login password: 000000 ( According to the RS-485 password setting)
Status Page
Event Log Page
-
The first index information is the latest event .
-
To set Year/Date/Time
System Control Page
- Power Switch: To control the power on/off of the Inverter.
- Buzz Setting: To set module buzzer normal/mute/one time
- Dry C Setting: To set rs485 dry contactor relay definition for major/minor
UI Config Page
- RS-485 Baudrate: To set RS-485 baudrate.
- Password: To set RS-485 6 digits password. (Default: 000000)
Inverter Config Page
Network Config Page
Note! Incorrect network setting may cause SN-1 PLUS connection issue.
Please set the values back to default whenever issue arises
( Refer to 2-3 )
SNMP Config Page
Set SN-1 PLUS Community Name :
Note! After AC restart, Community Name will go back to default.
SNMP V2C Description
SNMP Agent Trap
Note! Please contact your COTEK local distributor for MIB file.
Note! After AC restart, trap will go back to default
Installation and Operation
Installation of SN-1 PLUS
Step 1 : Hold the button on the panel and slot in the SN-1 PLUS card for 1 second
Step 2 : Fix the screw
Connection from SN-1 PLUS to PC
Connection via the router
- Connect SN-1 PLUS to the router
- Find the IP address of SN-1 PLUS from the router
- Type IP address of SN-1 PLUS in the web browser/NMS and then
Connection via PC
- Connect from SN-1 PLUS to PC
- The default static IP of SN-1 is 192.168.1.250. Please change the setting value of network interface card in PC. The static IP address of PC is 192.168.1.X (The value X cannot be the same value of SN-1 PLUS IP’s 250)
- Type IP address of SN-1 PLUS in the web browser/NMS and then connect to web-server/SNMP agent
Reset SN-1 PLUS to Default
Hold the button on the panel and slot in the SN-1 PLUS card for 1 second
Troubleshooting
Warranty
We guarantee this product against defects in materials and workmanship for a period of 24 months from the date of purchase. In case you need to repair or replace any defective power inverters, please contact COTEK local distributor.
This warranty will be considered void if the unit has been misused, altered, or accidentally damaged. COTEK is not liable for anything that occurs as a result of the user’s fault.
Unit 6 / 2-8 South Street, Rydalmere, NSW 2116 Tel: 61 2 7200-9200
References
- COTEK - Inverter Power Supply, Electronic Inverter Manufacturer
- Helios Power Solutions Australia | DC & AC Power Systems Specialist