TOMADO TFT3001W Table Fan Instruction Manual

June 5, 2024
TOMADO

TOMADO TFT3001W Table Fan

SAFETY INSTRUCTIONS

  • First carefully read the instruction manual in full prior to using the appliance and store the manual in a safe place for future reference.
  • Only use this appliance for the purposes described in the instruction manual.
  • never insert objects into the ventilation grid when the appliance is switched on.
  • Only connect the appliance to alternate current, with a mains voltage that corresponds with the information provided on the information plate of the appliance.
  • Never bend the power cord sharply or allow it to run across hot parts.
  • Fully unwind the cord to prevent it from overheating.
  • Never place the appliance near appliances that give off heat, such as ovens, gas cookers, hotplates, etc. Keep the appliance away from walls or other objects that could catch flame, such as curtains, towels (cotton or paper, etc.).
  • Always make sure the appliance is placed on an even, flat surface.
  • Only use the appliance indoors.
  • Do not leave the appliance unsupervised if the appliance is operational.
  • If you want to move the appliance, make sure the appliance is switched off.
  • Do not use the appliance if the plug, cord or appliance are damaged, or if the appliance no longer functions properly or if it is damaged in any other way. If this is the case, consult the retailer or our maintenance service.
  • If the cord of the appliance is damaged, it should be replaced by the manufacturer, his customer service or a similarly qualified person in order to prevent hazardous situations.
  • Never replace the plug or cord yourself. Repairs to electrical appliances should only be performed by skilled persons. Incorrect repairs may expose the user to serious hazards.
  • Never use the appliance with parts that are not recommended or supplied by the manufacturer.
  • Do not pull the cord and/or appliance to remove the plug from the wall socket. Never touch the appliance with wet or damp hands.
  • Never connect the appliance to an external timer or a separate remote control system, in order to prevent hazardous situations.
  • Keep the appliance out of reach of children. Children do not see the dangers associated with handling electrical appliances. Therefore, never allow children to operate electrical appliances without supervision. Keep the appliance and cord out of reach of children younger than 8 years of age.
  • The appliance can be used by children of 8 years and older and persons with a limited physical, sensory or mental capacity or lack of experience or knowledge, provided they use the appliance under supervision or have been instructed about its safe use and understand the hazards involved.
  • Children must not play with the appliance.
  • The appliance may not be cleaned or maintained by children, unless this is done under supervision.
  • If the appliance is not being used or is being cleaned, fully switch off the appliance by removing the plug from the socket.
  • Extension cords may only be used if the mains voltage (see the information plate) and capacity are identical to or higher than that of the appliance. Always use an approved extension cord.
  • Never submerge the appliance, cord or plug in water.
  • This appliance is intended for household and similar use, such as:
    • in staff kitchens, shops, offices and other work environments;
    • by guests of hotels, motels and other residential environments;
    • in Bed&Breakfast type environments;
    • farms.
  • If the appliance is not used as intended, no compensation can be claimed in case of defects or accidents and the warranty will be invalidated.
  • If you decide to stop using the appliance due to a defect, we recommend cutting the cord after removing the plug from the wall socket.

ASSEMBLY

Before using the fan for the first time, please proceed as follows: carefully unpack the appliance and all components and remove all packaging material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children. After unpacking the appliance, check it for external damage that may have occurred during transport. Assemble the fan in accordance with the instructions.

  1. Start by placing the footplate at the foot of the fan. Tighten the wing nut [ a ] by a quarter turn to attach the footplate to the foot.

  2. Place the rear protective guard on the fan.

  3. Fasten it by tightening the lock ring.

  4. Insert the fan blade onto the fan. Test the fan blade by rotating it by hand. During rotation,
    the blade should not create any friction with the lock ring. If it does, remove the fan and repeat all steps from the beginning.

  5. Mount the fan blade with the fastening cap. Tighten the fastening cap by turning it to the left – counter-clockwise.

  6. Place the front protective guard on the fan and use the clamps to attach it to the rear protective guard.

  7. Align the front protective guard with the rear protective guard using the positioning clamp [ b ] on the bottom side in order to attach both parts to each other properly. Use the bolt and nut at the top of the guards to fasten the guards to each other.

  8. Press the clamps [ c ] downwards in order to attach the front and rear protective guards to each other.

Place the fan on a flat, stable surface. Clean the exterior of the fan using a slightly damp cloth and then wipe it with a dry cloth. TOMADO-TFT3001W-
Table-Fan-fig-13

OPERATING THE FAN

Place the fan on a flat, stable surface. Insert the plug in a socket.
Switching on/off

  • Press one of the position buttons 1 to 3 to switch on the fan. By pressing position button 0, you switch off the appliance.
  • Position 0 = off
  • Position 1 = slow
  • Position 2 = medium
  • Position 3 = fast

Oscillation

This fan is able to oscillate (swerve to the left and right) for a better air displacement. Press in or pull out the oscillation knob. If you want to change the wind to an upward or downward direction, you can simply tilt the fan head upwards or downwards.TOMADO-TFT3001W-Table-Fan-fig-2

CLEANING AND MAINTENANCE

Before cleaning the fan, you must switch it off by pressing position button 0 and remove the plug from the socket.

  • Wipe the exterior of the appliance with a slightly damp cloth and dry properly.
  • If necessary, you can clean the protective guard using a vacuum cleaner (nozzle).
  • Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
  • Never submerge the fan in water or any other liquid.

RECYCLING

This symbol means that this product should not be disposed of with regular household waste (2012/19/EU). Observe the rules that apply in your country for the separated collection of electric and electronic products. Correct disposal of the product prevents negative consequences for the environment and for public health. The packaging material of this product can be recycled 100%, return packaging material separately.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals