KAYOBA 021775 Air Track Instruction Manual
- June 10, 2024
- KAYOBA
Table of Contents
021775 Air Track
Instruction Manual
021775 Air Track
021775
Jula AB reserves the right to make changes to the product. Jula AB claims
copyright on this documentation. It is not allowed to modify or alter this
documentation in any way and the manual shall be printed and used as it is in
relation to the product. For the latest version of operating instructions,
refer to the Jula website.
SYMBOLS
| Read the instructions.
---|---
| Safety class II
| Approved in accordance with the relevant directives.
****| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
| Size | L300 x W100 x H10 cm |
|---|---|
| Product weight | 10 kg |
DESCRIPTION
Inflatable gymnastics mat that makes training safer and reduces the risk of
injury while performing exercises.
It is made of a high-quality material and offers not just superior comfort and
enhanced protection against injuries while training, it also absorbs sounds
and vibrations, stays in
place on the floor, is both water and damp proof, and stronger and more
durable than traditional mats.
The mat is constructed with a double layer of extra thick PVC, which is long-
lasting, non-toxic and environmentally-friendly. Double-sealed edges on each
side and a replaceable valve ensure long life and secure against air leakage.
Unique anti-slip texture on the mat ensures it stays safely in place during
training and built-in handles make it easy to carry and move.
USE
-
Before opening the box, check that it is intact and that no transit or handling damage has occurred. Do not use sharp or pointed tools or blades to open the box – risk of puncturing the gymnastics mat or damaging the accessories.
-
Lift the mat and all accessories out of the box. Check that all parts are included and undamaged.
-
Find or clear an even and level surface on which the gymnastics mat can be laid out to its full length.
-
Turn the air valve cap anticlockwise to open it.
FIG. 1 -
Connect the electric air pump to the air valve on the gymnastics mat, then start the pump to inflate the mat.
FIG. 2 -
When the gymnastics mat is fully inflated (this normally takes 45-60 secs), first remove the pump hose from the air valve and then turn off the pump.
NOTE:
The design of the electric pump ensures that the gymnastics mat cannot be damaged by the pump if it remains switched on and connected to the mat for an extended period. However, we recommend that you do not leave the pump switched on for more than 60 seconds. -
To deflate the gymnastics mat, connect the hose to the deflation port on the electric pump and to the air valve on the mat. When all the air has been expelled, first turn off the pump and then disconnect the hose from the air valve on the mat.
NOTE:
The gymnastics mat has one air valve.
The mat is inflated or deflated through the air valve, depending on which port on the pump the hose is connected to. -
When the electric pump has been disconnected from the air valve on the mat, put the air valve cap back in place and, using your fingers, turn it 45 degrees clockwise to fully close it.
-
If the gymnastics mat gradually loses air, tighten the air valve clockwise using the valve tool that is included with the product.
NOTE:
Inspect the gymnastics mat for visible cuts or punctures that are causing air to leak out. -
The gymnastics mat is made of a high-quality material using the latest technology. It is designed to withstand all kinds of rigorous and advanced training. If the mat gets a puncture, for any reason, it can be quickly repaired using the repair kit that is included with the product.
MAINTENANCE
NOTE:
Keep the gymnastics mat away from extreme heat, open flames and sharp edges.
When not using the gymnastics mat and its accessories, store in a dry place
where they cannot be damaged by insects and rodents.
Any cuts or punctures can be repaired using the material provided in the
repair kit that comes with the product and a high-quality adhesive.
TROUBLESHOOTING
REPAIR INSTRUCTIONS
- Find the damaged area/puncture.
- Cut a sufficiently large piece of the repair material (from the repair kit) to completely cover the damaged area.
- Smear a high-quality adhesive (not included) onto the repair patch, press the patch firmly onto the damaged area and leave it to dry for several hours.
WWW.JULA.COM
© JULA AB 2022-11-24
JULA AB
BOX 363, 532 24 SKARA, SWEDEN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>