bright starts 17165-MEWS Activity Gym User Manual
- June 1, 2024
- bright starts
Table of Contents
bright starts 17165-MEWS Activity Gym
SAFETY WARNING
To Prevent Serious Injury or Death:
- NEVER leave a child unattended.
- Use only under adult supervision.
- Do not add additional strings or straps to the product.
- Babies should not be allowed to sleep while lying in this activity gym.
- Do not use this product as a blanket.
- Only use the mat on the floor.
- Do not use the mat in the crib, play yard, etc.
- Not intended for carrying a baby.
- Do not connect toy bar A-hooks to loops on top of the mat.
- Do not connect links across the crib, play yard or activity gym.
- Never connect links to form a chain more than 12” long.
CAUTION
The toy bars are under tension. To avoid injury, grasp firmly and release the
tension slowly.
IMPORTANT INSTRUCTION
- Adult assembly is required.
- Please read all instructions before assembly and use of the product.
- Care should be taken in unpacking and assembly.
- Examine the product frequently for damaged, missing, or loose parts.
- DO NOT use if any parts are missing, damaged, or broken.
- Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
Parts List and Drawing
- (1) Playmat
- (2) Toy bar assembly
- (1) Kick Pad
- (1) Plush toy
- (1) Oball™ Toy
- (1) Leaf Toy
- (3) Flashcards
- (1) Pillow
- (4) Fun Link™
Assembly Instructions
Operating Instructions
Battery Installation
Battery Information
The musical toy requires (3) size AA/LR6 (1.5V) alkaline batteries for normal operation (not included).
CAUTION:
Follow the battery guidelines in this section. Otherwise, battery life may be
shortened or the batteries may leak or rupture.
- Always keep batteries away from children.
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment.
- Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the product into storage for a prolonged period.
- Do not dispose of products or batteries in a fire, batteries may explode or leak.
This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.
Care and Cleaning
- Mat – Remove the toy bar, toys, and plush toys before washing. Machine wash with cold water, gentle cycle. No bleach. Air Dry.
- Toy bar assembly and toys – Clean before use with a damp cloth and mild soap. Air dry. Do not immerse in water.
- To reassemble the gym – Connect the A-hook at the ends of the toy bars to the fabric loops on the bottom corners of the play mat.
- Pillow – Clean before use with a damp cloth and mild soap. Air dry.
FCC Statement
FCC Statement/CAN ICES-3 (B)/NMB-3(B)
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Contact Information
- MANUFACTURED FOR • FABRIQUÉ POUR ©2024 KIDS2, LLC www.kids2.com/help
- KIDS2, LLC ATLANTA, GA USA 30305 • 1-800-230-8190
- IMPORTED BY
- KIDS2 CANADA CO. PO BOX 54059, RPA LAWRENCE PLAZA, TORONTO, ON. M6A 3B7
- KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
- KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo, Japan 150-0013 • (03) 5322-6081
- KIDS2 UK LTD. GROUND FLOOR, SUITE A1A, BREAKSPEAR PARK, BREAKSPEAR WAY, HEMEL HEMPSTEAD, HP2 4TZ • +44 01582 816 080
- KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS • +31 20 2410934
- KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488
MADE IN CHINA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>