Ethan Allen 092012 BRS Cole Pull Up Floor Lamp Instruction Manual
- June 12, 2024
- ETHAN ALLEN
Table of Contents
Cole Pull Up Floor Lamp
Assembly Instructions
092012 BRS
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a
polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug
or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only
the type of bulb specified. Keep flammable materials away from the bulb. DO
NOT OPEN the product or alter the wiring in any manner. If using an extension
cord, follow precautions provided with the power cord.
Use care when unpacking. Locate ALL PARTS INCLUDED before disposing of
packaging materials. Remove the silica gel packets from the socket before
plugging the lamp into an outlet.
ASSEMBLY, CARE, AND TROUBLESHOOTING
- No tools required for assembly
- Light bulb is not included
Parts Included: (Refer to Figure)
A. Socket Ring
B. Shade (may be packed in separate carton)
C. Lamp Socket and Lamp Base (connected; no assembly required)
D. Plug Cap
Assembly Procedure: (Refer to Figure)
- Install the Shade (B) onto the Lamp Socket (C)
- Screw the Socket Ring (A) onto the Shade (B)
- Install the bulb into the Socket (C)
- Remove the Cord Plug Cover (D) from plug
Caring for and cleaning your lamp:
- Wipe with a soft, dry cloth.
- Avoid cleaners, scouring pads, etc., as these may cause damage to the lamp finish.
- Before changing the bulb, unplug lamp and allow the bulb to cool first.
Troubleshooting:
| Problem: | Possible cause: | Correction: |
|---|---|---|
| Bulb does not light | Bulb is burnt or damaged | Replace bulb |
| Power to lamp is off | Confirm power is on | |
| Lamp is not plugged in | Confirm lamp is plugged in |
If the fixture still does not work after troubleshooting, please contact your
local
Ethan Allen Design Center.
SAVE THESE INSTRUCTIONS
©2018 Ethan Allen Global, Inc.