MONOPRICE 39512 Workstream PTZ Conference Camera User Manual
- June 9, 2024
- Monoprice
Table of Contents
39512 Workstream PTZ Conference Camera
User Manual
P/N 39512
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference.
-
This device is intended for indoor use only.
-
Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device. If moisture does get in or on the device, immediately remove it from its power source and allow it to fully dry before reapplying power.
-
Do not touch the device, the power cord, or any other connected cables with wet hands.
-
Do not expose this device to excessive vibration, extreme force, shock, or fluctuations in temperature or humidity.
-
Do not expose this device to excessively high temperatures. Do not place it in, on, or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
-
Prior to operation, check the unit and power cord for physical damage. Do not use if physical damage has occurred.
-
Before plugging the unit into a power outlet, ensure that the outlet provides the same type and level of power required by the device.
-
Unplug this device from the power source when not in use.
-
Take care to prevent damage to the power cord.
Do not allow it to become crimped, pinched, walked on, or become tangled with other cords. Ensure that the power cord does not present a tripping hazard. -
Never unplug the unit by pulling on the power cord. Always grasp the connector head or adapter body.
-
Ensure that power is turned off and disconnected before making any electrical connections.
-
Remove the batteries from the controller if it will go unused for a lengthy period of time.
-
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.
-
This device has no user serviceable parts. Do not attempt to open, service, or modify this device.
FEATURES
- Compact and simple design
- 2.1 megapixel camera with a 1080p resolution
- Equipped with smooth motors for pan and tilt movement
- Advanced video algorithm guarantees high quality video
- 3x optical zoom
- Compatible with the VISCA and PELCO-D camera control protocols
- Works with most Web Conference Software
- Can be computer controlled using an RS-232 or RS-485 serial connection
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the
items listed below. If anything is missing or damaged, please contact
Monoprice Customer Service for a replacement.
1x PTZ Conference Camera
1x IR Remote Control
1x USB 3.0 Cable
1x AC Power Adapter
1x L-type Wall Mount Kit (Bracket and Screws)
1x User’s Manual
REMOTE CONTROL OVERVIEW
- Reset Button, LED Indicator, and Power Button
- Device Selection: The camera address code and remote control address code must correspond (set the camera code to 1-3 in the OSD menu).
- Pan and Tilt Controls: Use the directional keysto move the camera pan and tilt. Press the Home button to return the camera to the home position.
- Focus Controls: Set the focus to Auto or Manual. When Manual is selected, use the Farand Near buttons to adjust the focus.
- Zoom Controls: Use the + and – buttons to adjust the optical zoom.
- OSD Controls: Press the Dome OSD or Lens OSD buttons to access the Dome or Lens OSD menus. Press the Rev button to flip the camera image or use a mirror image.
- Preset Control Buttons: After pressing a Preset Address Button, press Set to save the preset, press Clear to erase the preset, or press the Call button to move the camera to the saved preset position.
- Preset Address Buttons: Press one of the numbered keys to select one of the six presets. After selecting the preset, press the Set button to save the camera position to the preset, the Clear button to erase the preset, or the Call button to move the camera to the saved preset position.
SAMPLE CONNECTION DIAGRAM
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist
you with any questions you may have about installation, setup,
troubleshooting, or product recommendations. If you ever need assistance with
your new product, please come online to talk to one of our friendly and
knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com or through email by sending a
message to tech@monoprice.com.
Check the website for support times and links.
SPECIFICATIONS
| Model | 39512 |
|---|---|
| Image Sensor | 1/2.8″ Sony® CMOS |
| Effective Pixel | 2.1 Megapixel |
| White Balance | Auto/Manual |
| Lens Focus Range | Auto focus, f=3.310 |
mm
---|---
Iris| Fixed
Zoom| 3x optical
Field of View| 73°
Video Output
Connector| USB 3.0 Type-B
Video Output
Resolutions| 1080p@30Hz,
720p@30Hz, 800×600,
640×480
Communications
Protocols| VISCA, PELCO-D
Baud Rate Range| 9600bps — 38400bps
Preset Positions| 64
Image Flip| Supported
Pan Movement Speed| 1 — 40°/sec
Pan Movement Angle| 330°
Tilt Movement Angle| +30 (up) — -30°
(down)
Remote Control| Included
Input Power| 12 VDC ±10%
Operating Temperature| +32 — +122°F (0
+50°C)
Operating Humidity| 0 – 95% RH, noncondensing
---|---
| 7.1″ x 4.4″ x 5.1″
Dimensions| (180 x 112 x 129
| mm)
Weight| 18.9 oz. (535g)
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Modifying the equipment without Monoprice’s authorization may result in the
equipment no longer complying with FCC requirements for Class B digital
devices. In that event, your right to use the equipment may be limited by FCC
regulations, and you may be required to correct any interference to radio or
television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>