GOLDEN LIGHTING 6958-BA3 Roxie 3-Light Matte Black Clear Glass Semi-Flush Mount Instruction Manual
- September 5, 2022
- GOLDEN LIGHTING
Table of Contents
6958-BA3 Roxie 3-Light Matte Black Clear Glass Semi-Flush Mount
Instruction Manual
Thank You for Choosing Golden Lighting for Your Lighting Needs!
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24″ of the island. Fixtures should hang at least 30″ above the
countertop.
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″
narrower than the width of the table.
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor.
Allow clearance for any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert
lighting advice. To help create the perfect look, visit
www.GoldenLighting.com.
Assembly Instructions: 6958-BA3, 6958-3SF
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social…
How to Identify the Fixture’s Wires
Hot: Smooth, Black, or Transparent with Black Inner Thread
Vivo: Suave, negro o transparente con hilo interior negro
Neutral: Ribbed, White or Transparent with White Inner Thread
Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
https://qrco.de/bbv8UC
Get help and quick tips, and explore curated content
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT:
- All installation work should be done by an accredited professional.
- Shut off the power supply at the fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
Assembly Instructions:
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power at
the circuit breaker and remove the old fixtures from the wall, including the
old mounting strap. 1. Mounting strap (B) contains several pairs of threaded
holes. Find the pair of holes that matches the spacing of the holes on the
junction box and the backplate (F). Two sets of mounting screws (A & D) should
be attached to the mounting strap (B). You may need to tighten nuts (C) which
hold mounting screws (A) in place. 2. Pull the house wires through the center
of the mounting strap (B). Secure mounting strap (B) to the junction box with
mounting screws (D) and a screwdriver. Tighten the screws securely.
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation.
Please proceed to the next step.
CONNECTING THE WIRES
3. Have an assistant support the fixture’s weight while completing the
wiring.
Refer to the wiring diagram and attach the fixture’s wires to the power supply
wires from the junction box. Attach the fixture’s wires to the power supply
wires from the junction box. Connect Hot to Hot (transparent wire with black
inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with
white inner thread, white, or ribbed wire), and Ground to Ground (transparent
wire with green inner thread, green wire, or copper). Twist the ends of the
wire pairs together, and then twist on a wire connector. Make sure all twists
are in the same direction. If there is no house ground wire coming from the
junction box, locate ground screw (E) on the mounting bracket/mounting strap
and wrap the fixture’s ground wire around the ground screw. Use a screwdriver
to tighten the top of a ground screw (E) onto the wires and into the mounting
bracket/mounting strap. Tuck the wires into the junction box.
FINISHING THE INSTALLATION
4. Place the backplate over the mounting strap (B) so that the mounting
screws (A) protrude from the holes in the backplate (F). Thread deco nuts (G)
onto the exposed threads of mounting screws (A) until the backplate (F) is
snug against the wall. Lift metal shades (I) up and over the sockets (H).
Thread socket covers (J) onto the sockets (H) to secure the shades to the
fixture. Install light bulbs (not included) into the sockets (H) in accordance
with the fixture’s specifications. Do not exceed the maximum recommended
wattage. Move shades (I) at joints (L) to adjust the fixture to your preferred
position on the wall or ceiling. Your installation is now complete. Turn on
the
power and test the fixture.