belkin AUZ002 Soundform Connect Audio Adapter Owner’s Manual

: June 4, 2024
: belkin

Table of Contents

belkin AUZ002 Soundform Connect Audio Adapter
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

belkin AUZ002 Soundform Connect Audio Adapter

(Audio cable not included)

belkin-AUZ002-Soundform-Connect-Audio-Adapter-02

Hold unlocked iPhone near tag to initiate setup process. Then follow onscreen instructions

belkin-AUZ002-Soundform-Connect-Audio-Adapter-05

If step 3 is unsuccessful, launch the Apple Home app, tap the “+,” select “Add Accessory,” and then follow setup instructions.

Blinking Green: Power on/start up
Blinking White: Ready to set up
Solid White: Connected, set up
Solid Red: No Wi-Fi connection
Blinking Red: Critical firmware issue

belkin-AUZ002-Soundform-Connect-Audio-Adapter-07

Download the Belkin SOUNDFORM app to update your firmware and for optimal performance of multi-room audio.

RESET

Federal Communications Common Interference Start
DECLARATION OF CONFORMITY WTTH FCC RULES FOR Electric>Magnetics COMPATIBILITY
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094. Tet +1 (310) 7S1 S100. declare under our sole responsibility that
the product AUZ002 to which this declaration relates. complies with Pan 15 of the FCC Rules. Operation rs subject to the following two conditions:

This device may not cause harmful interference. and
his device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission Interference Statement
This equipment has ~n tested and found to comply with the limits for a Class B digital device, pursuant to Pan 1S of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses. and can radiate radio frequency energy and, or not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception\ which can be determined by turning the equipment off and Of\ the user is encouraged to try to correct the interference by one of the following measures;

Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements. please follow operation instructions as documented in this manual. This equipment should be Installed and operated with a minimum distance of 20 cm between the radiator and your body.
Innovation, Science and Economic Development Canada Statement

CAN ICES-3 (B)/NMB·l (8)
This device complies with ISED’s license-exempt RSS standards.. Operation is subject to the following two conditions:

This device may not cause interference. and
This device must accept any interference. including interference that may cause undesired operation of the device.

For product available In the US Canada market. only channel 1-11 can be operated. Selection of other channels is not possible.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and your body.

Restrictions In the 5 GHz Band
The device for the band S150-5250 MHz is only for indoor usage to reduce potential for harmful Interference to co-channel mobile satellite systems.
This class B digital apparatus complies with ICES-003(8). RSS-216 and RSS-247.

Operation Is sub1ect to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device

The installer of this radio equipment must ensure that the product is located such That It does not RF field m excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb. As mentioned before, the

Installer cannot control the antenna orientation. However, they could place the complete product in a way that causes the problem mentioned above. The device for operation in the band S1S0·5250 MHz is only for indoor use to reduce the potential for harmful Interference to co-channel mobile satellite systems.

Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-S3SO MHz and S6SO·S8SO MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Simplified EU Declaration of Conformity
We. Belkin international Inc. declare under our sole responsibility that the product AUZ002 to which thrs declaration relates. is in conformity
with RED Directive 2014/Sl/EU, Energy Directive 200S/32/EC & 2009/125/EC and RoHS Directive 2011/65/EU (Recast). The full text of the EU declaration of conformity is available at the following Internet address: www.belkln.com/doc

Radiation Exposure Statement. This equipment complies with radiation exposure limits set font for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

This product does nor have a standby or off mode other than removing the connection from the wall charger to the smart speaker wireless charger or removing the wall charger from the AC mains.

The operating frequency bands and the maximum transmitted power limit are listed below:
2412-2472 MHz <95 mW 5745-5825 MHz <25mW
5180-5240 MHz <195 mW 5260-5320 MHz<100mW

National Restrictions caution:
This device is restricted to indoor use only when operating in 5150 – 5350 MHz
For information on product disposal, please refer to http://www.belkin.com/uk /weee-regulations/

Disposal Information for User

Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment
CWEEE).
The barred symbol of the rubbish bin shown on the equipment Indicates that, at the end of its useful life, the product must be collected separately from other waste.
Therefore, any product that has reached the end of ,Its useful life must be given to waste disposal centers specializing in separate collection of waste
electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.
The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally
compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the electronic equipment. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.

WARNING: To avoid risk of fire, electric shock etc, only the accessories ( external power supply) provided by the manufacturer can be used with the product

Safety instructions
Use Indoors and in a dry location only, keep away from wet or damp locations.
Keep smart speaker and wall adapter away from any liquids or moisture.
Clean only with dry soft cloth.
Unplug the smart speaker when unused for long periods of time.
Do not store your device in very hot or very cold areas. It Is recommended to use your device at room temperatures.
Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
Do not use if visible defects are observed on the smart speaker or wall adapter.
Do not attempt to service or disassemble. Any change$ or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
If you experience problems with the smart speaker. please discontinue use, unplug the wall adapter of the smart speaker wireless charger from the AC socket, and contact Belkin for assistance.
Caution: To prevent possible hearing damage do not listen at high volume levels for long periods.

Information for end – users as per COMMISSION REGULATION (EU) 2019/1782

Manufacturer’s name or trademark, commercial registration number and address|

Ten Pao

FREE WARRANTY AND SUPPORT INFORMATION
IMPORTANT
PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT FREE WARRANTY INFORMATION
BEU(IN LIMITED PRODUCT WARRANTY CAI/STIIAUA OF NEW ZEALAND)
This free warranty Is provided to you by Belkin Limited CABN: 64 095 402 663), an Australian coq>0ration and a wholly-owned subsidiary of
Belkin International, Inc., of Suite 11, 14 Pioneer Avenue, Tuggerah NSW 2259, phone: +61 (0) 2 4350 4600; etMil: Kce@belkin.com. cuBelkin”).

IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTS
The benefits we give in this manufacturer’s warranty are additional to any rights and remedies that you may have under the Australian Competition and Consumer Act 2010 or the New Zealand Consumer Guarantees Act 1993 CCGA) (as applicable) and other applicable Australian and New Zealand consumer protection laws (together “ANZ Consumer Laws”).
This manufacturer’s warranty is governed by the laws of the country In which you purchased your product.

In Australia our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled:

To cancel your advice contract with us: and
To a refund of the unused portion, or to compensation of its reduced value.

You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion.

You are also entitled to be compensated for any other reasonably foreseeable loss Of’ damage from a failure in the goods or service
In New Zealand, our goods come with guarantees that cannot be excluded under the Consumer Guarantees Act 1993 (CGA).

This manufacturers warranty Is not intended to:

Change or exclude any rights under the ANZ Consumer Laws that cannot be lawfully changed or excluded; or
Limit or exclude any right you have against the person who sold the Belkin product to you if that person has breached their sales contract with you.
Note: This means that the general exclusions and limitations of liability in this document do not affect any rights you may have under the ANZ Consumer Laws.

WHAT DOES THIS WARRANTY COVER?
Product Warranty; Belkin warrants that this Belkin product and any associated software media Cle media on which the product software is provided) will be free from defects in materials and workmanship under normal use during the Warranty Period as defined below (Product Warranty). This meansthat the product won’t be faulty, and that It will look and work as advertised, during the Warranty Period.

Who is covered under this warranty?
Only original end-user purchasers of the product purchased within Australia or New Zealand are covered.

How long Is the product warranted?
The Warranty Period begins on the date the product was purchased by the original end-user purchaser and lasts for the period set out in the table below (Warranty Period):

Your rights during the Warranty Period are In addition to your consumer guarantee rights that cannot be excluded under the ANZ Consumer Laws..

What isn’t covered by the Product Warranty?
Subject to your rights that cannot be excluded under the ANZ Consumer Laws and may be additional to the Product Warranty and Connected
Equipment Warranty, Belkin does not give any warranty:

For the Connected Equipment, for any services associated with the Connected Equipment, or any remedies offered or provided by the manufacturer
of the Connected Equipment:
In relation to software or serves provided by Belkin or any third party included in or with the product other than the warranty for software media
described above in this warranty;
That the product, software or services
will always operate uninterrupted or error free;
That the product, software or services, or any equipment, system or network on which the product, software or services are used are 100% secure
and cannot be hacked, or
That a third party service the product needs will always be available.

Will the Product Warranty always apply?
Subject to your rights that cannot be excluded under the ANZ Consumer Laws and may be additional to the Product Warranty, the Product
Warranty does not apply if:

The product has been tampered with or the assembly seal has been removed or damaged;
The product has been altered or modified by someone other than Belkin:
The warranty calm was made fraudulently or by misrepresentation;
The product was not installed, operated, repaired, or maintained in accordance with Belkin’s instructions (for example, this warranty will not apply
If the product has been used outdoors or in a wet area, or if the product has been used together with a generator, heater, sump pump, water-related device, life support device, medical device, car, motorcycle, or golf-cart battery charger). To be used Indoors only and in dry areas. All warranties contained herein are null and void if used in any way with any of the aforementioned devices;
The product has been subjected to abnormal physical or electrical stress. misuse, negligence, or accident: .
Damage to the product is cosmetic. including scratches and dents, or defects caused by normal wear and tear or normal aging of the product;
The serial number on the product has been altered, defaced, or removed;
The product was used in conjunction with other extension cords, power strips, adapters, UPS’s, surge protectors, other grounding wires or electrical
connections; or
The product was supplied or licensed for beta, evaluation. testing or demonstration purposes, and you didn’t buy or license the product.

Your rights during the Warranty Period are In addition to your consumer guarantee rights that cannot be excluded under the ANZ Consumer Laws..

What isn’t covered by the Product Warranty?
Subject to your rights that cannot be excluded under the ANZ Consumer Laws and may be additional to the Product Warranty and Connected
Equipment Warranty, Belkin does not give any warranty:

For the Connected Equipment, for any services associated with the Connected Equipment, or any remedies offered or provided by the manufacturer
of the Connected Equipment:
In relation to software or services provided by Belkin or any third party included in or with the product other than the warranty for software media
described above in this warranty;
That the product, software or services
will always operate uninterrupted or error free;
That the product, software or services, or any equipment, system or network on which the product, software or services are used are 100% secure
and cannot be hacked, or
That a third party service the product needs will always be available.

Will the Product Warranty always apply?
Subject to your rights that cannot be excluded under the ANZ Consumer Laws and may be additional to the Product Warranty, the Product

Warranty does not apply if:

The product has been tampered with or the assembly seal has been removed or damaged;
The product has been altered or modified by someone other than Belkin:
The warranty calm was made fraudulently or by misrepresentation;
The product was not installed, operated, repaired, or maintained in accordance with Belkin’s instructions (for example, this warranty will not apply
If the product has been used outdoors or in a wet area, or if the product has been used together with a generator, heater, sump pump, water-related
device, life support device, medical device, car, motorcycle, or golf-cart battery charger). To be used Indoors only and in dry areas. All warranties contained herein are null and void if used in any way with any of the aforementioned devices;
The product has been subjected to abnormal physical or electrical stress. misuse, negligence, or accident: .
Damage to the product is cosmetic. including scratches and dents, or defects caused by normal wear and tear or normal aging of the product;
The serial number on the product has been altered, defaced, or removed;
The product was used in conjunction with other extension cords, power strips, adapters, UPS’s, surge protectors, other grounding wires or electrical connections; or
The product was supplied or licensed for beta, evaluation. testing or demonstration purposes, and you didn’t buy or license the product.

You always have the option to return The product to the original seller if you have a problem. You can make a claim with the seller based on this warranty or any consumer laws that apply to you.

What do I need to do to be entitled to claim under this warranty?
Call our Technical Support team on 1800 23S S46 if you are calling from Australia or 0800 23S S46 if you are calling from New Zealand.
You will need 10 give us some Information when you contact us such as:

Your contact details;
The part number (also known as the model number) of your Belkin product. This is usually located on the base of the product and begins with the letter ‘F’ (e.g. AUC001):
A detailed description of the problem;
Adapted proof of original purchase; and
If you have spoken to us previously, your case number

If this is the first time you have called to claim under this warranty, you will be issued will an 8 digit case number.
Visit the following link: http://www.belkin.com/au/support returns and fill out all required fields when you are prompted: Case Number; Product to be

Replaced and select Replacement Type. Once you fill out the aforementioned fields and permitting all details are correct, the website will generate a shipping label for you to print out and affix to the packaged up product.

We may need you to send the product back to us or our designa1ed repair facility so that we can fix or replace 11. We will let you know when you
contact us.

If we ask you to return your product to us by post. you will be given a Return Materials Authoriut1on (RMA) number and we’ll tell you where to send the product. For persons who purchased the product In Australia, the applicable address will be either c/• Kuehne + Nagel Pty Ltd, 1/3 Basalt
Road, pemulwuy NSW 2145 or Belkin Limited, PO Box 3099, Tuggerah NSW 2259, as advised by us . For persons who purchased the product in New
Zealand. the applicable address is PO Box 201076, Auckland Airport, Auckland. 2105. New Zealand. You will need to make sure the product is properly packaged and shipped.

You will be responsible for any reasonable costs of returning your product to us.

We need to identify your product when it reaches us, so you1I need to Include the RMA number ANO a copy of your dated proof of original purchase
(please keep The ong1nal) with the returned product. We also recommend that you send the package by registered and insured mall or by overnight courier to protect the package whilst it is in transit.

What happens when I return my product under this warranty?
Defective products covered by this warranty will be replaced without charge, or Belkin will provide you with a refund of The purchase price of the product, minus any rebates and discounts
Subject to your rights that cannot be excluded under the ANZ Consumer Laws the remedy offered under this Product Warranty will be determined by Belkin in its discretion.

We can only ship replacernen1 products under this Product Warranty to locations in The country where the original product was purchased.
Belkin may need to delete all or part of your data to replace your product. In Australia or New Zealand, if you provide your old product for us to replace with another product, we will wipe all your data from The old product. We will no! retain a copy of the wiped da1a. Belkin may also install software updates as part of warranty service.

PLEASE MAKE SURE THAT YOU BACK UP ALL OF YOUR DATA ON THE PRODUCT ANO/OR CONNECTED
EQUIPMENT BEFORE SENDING IT IN FOR REPAIR OR REPLACEMENT BELKIN IS NOT RESPONSIBLE FOR ANY LOSS OF OATA OR SOFTWARE DURING WARRANTY SERVICE

Replacements not covered under warranty or your rights under the ANZ Consumer Laws may be refused by your plate of purchase, or may be subject to charge. ‘

Technical SUPPORT
This warranty is not a service or support contract. Oe1ails on our technical support offerings and policies (including any applicable fees) can be found
http://www.belkin.com/au/support
Belkin provides many differen1 options to support you. Please click on or go 10. http://www.belkin.com/au/support for more details. Please make sure to change To your local country’s 1f necessary.

Along with the Product Warranty, Belkin provides Complimentary Assisted Technical Support for the Warranty Period to get your hardware up and running , Complimentary Assisted Technical Support includes technical support (by phone) and live cha! (Through your computer). At this Time chat is only available In certain countries. Please visit our websites (ind1ca1ed above) in your local area for details.

For additional support beyond the Complimentary Assisted Technical Support or for assistance on advanced features beyond basic support, please contact our Technical Support team to learn more about how we can help you get the most out of your product.

Telephone support may not be available where you live and may be subject to charge.