OLIMPIA SPLENDID ACS Expansion Tank Kit Instruction Manual
- June 9, 2024
- OLIMPIA SPLENDID
Table of Contents
ACS Expansion Tank Kit
1. Expansion tank kit
2. Packaging label
3. Box
4. Instruction sheet
5. Screws (x6)
ACS EXPANSION TANK KIT (SHERPA TOWER S3 E)
This instruction manual is an integral part of the manual of the
appliance
on which the KIT is installed. Please refer to that booklet
for GENERAL WARNINGS and FUNDAMENTAL SAFETY RULES.
Before installing the mixing valve, make sure that the pressure gauge on the
front panel indicates the pressure inside the machine at 0 bar. If this is not
the case, proceed to relieve the pressure by bleeding the water through the
bleeder located at the base of the machine.
If the expansion tank (1) is supplied disassembled, proceed as described
(Fig.1):
a. Position the bracket (2) under the expansion tank (1) and screw the nut
(3).
b. Position the bracket (4) inside the bracket (2) and stop it through the
four screws (5).
c. Connect the flexible hose (6) through the respective connector located
under the tank
(1).
d. Position the bracket (7) above the expansions tank (1).
To position the kit in the machine, proceed as described (Fig.2):
a. Remove the cap (8a) located on the fitting (8).
b. Position the kit (1) in the machine, making sure the bracket (2) is
supported in the
basin hole (2a).
c. Screw the nut (6) onto the fitting (8).
d. Screw the bracket (7) to the machine through the screws (5).
OLIMPIA SPLENDID spa
via Industriale 1/3
25060 Cellatica (BS)
www.olimpiasplendid.it
info @olimpiasplendid.it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>