vtech FC-0914 DECT Cordless Senior Phone Instruction Manual
- June 9, 2024
- vtech
Table of Contents
vtech FC-0914 DECT Cordless Senior Phone
BEFORE USE
Connecting your phone:
- Connect plugs in corresponding sockets in the base station .Plug the telephone line into telephone socket and insert power plug in an electrical outlet.
- Insert batteries in Handset.
- After first time power up (base unit Is connected to AC mains), welcome mode (country) will appear on the screen (Fig.1 ).
- Before you start to use your telephone, charge batteries continuously for 15 hours. Use only plug adapter and rechargeable batteries suppled with your phone.
Handset Base Station Keys
| 1 | OK/Menu= |
|---|---|
| 2 | Back/ lntarcorn •- |
| 3&4 | Navioalicn k8V |
| 6 | Ha–=iiii / Ex – |
| 6 | # kay – I’.-to Insert#; |
In idle mode: Pn,u and hold to 8CC11SS the call list.
7| 0 kay- During a call: Press and hold to Insert a flash for call Wallan.
a| * kay- Pram to insert “; In idle mode: press and held to access
the radial list
9| M1, M2 kay – In idle mode/during a call: P19SS to dial pn1-
recorded number s1a’ad In direct mem.
10| -911 Quick Dlal Key
One nress to dial out 911 amem11ncv number.
11| Talk kev/Loudspeaker
12| Paging kay- To locate handset/to start registration procedure.
“Subject 10 aublc:ription and availability of the service from The fixed line
| Indicates battery is fully charged.
---|---
| indicates battery is fully discharged.
| Indicates that an external call la connected or held.
Iconblinka when raceivino an incoming call.
| Indicates you have new voice mail ,-ge•.
| indicates you have missed ca11a•.
| Displays when the alarm clock Is ectlvaled.
| Displays when handsfree la activated.
---|---
| Displays when ringer volume is turned off.
| Indicates that the handset la regl8W8d and within range of the base slauon.
Icon blink& when the hadal is out of range or is searching for
a base.
USING THE PH ONE
Received a call
-
Makeacall
-
Make a Call
- Press \’ to get the line, lhen pr8&S phone number to dial out Iha call;
- Prass phone number then press \’ to dial out the call.
-
From Redial list
- Press and hold to access The call log list;
- Press or to caeca the redial list Noord;
- Select the phone number In 1he redial 11st;
- Press .:=. lo dial out the call
-
From Call Log List
- Presa and hold # lo IICCllll8 the call log 11st.
-
Press or “I’ to access the call log list;
- Select the phone number in the call log list;
- Press 11’l:u to dial out the call
-
From Direct Memories
- Long press on KEY 1 or KEY 2 or KEY 3 or M1 or M2 or in idle mode to dial out.
-
From Phonebook
- Press + to access the phonebook;
- Press +or – to select the phone book record;
- Press, + to dial out the call
-
To make an Internal Call
-
If only 2 registered handsets, press to start Intercom;
-
If more than 2 registered handsets, press to start
Intercom; -
Press Aor’9 to select handset number;
-
Press ,.’l:u to start the Intercom of selected handsets.
-
-
To make a Three-Party Conference Call
- Press OK MENU to enter menu then select INTERCOM;
- Press 11’lu to confirm;
- Press +or – to select handset number;
- Press 11’il:u to confirm the selected handset;
- Press on the called handset to answer;
- Long press on the calling handset to establish conference call.
EARPIECE MODE/SPEAKERPHONE MODE/MUTE CALL/BLOCK CALL
EARPIECE MODE
During a call:
During a call, press + or – to select earpiece volume from volume 1~5.
Speakerphone mode
During a call:
- Press to activate or deactivate handsfree model with 5 volume levels;
- Press + or – to select volume 1-5. The currant setting ls show;
- When you end the call, the setting will remain at the last selected level.
Mute call
During a call:
Mute a call is a function when you talk to someone nearby without letting the caller hear you during a call.
- Press Cato mute the microphone and “SECRECY ON” will display on LCD; then your microphone is muted and your caller cannot hear you;
- Press CHF again to unmuted.
. Block Call
Block call is a function to block unwanted call from a phone number.
-
Press 11’il:u to enter menu then select CALL BLOCK;
-
Press 11’il:u to confirm;
-
Press to select M1 or M2, KEY 1 or KEY 2 or KEY3
-
Press MENU to confirm; – Then edit or enter the number;
-
Press MENU to confirm. PHONE SETTING This phone can be customized according to your preference to access the different possibilities press MENU to enter into menu to select the settings.
Date and Time Settings -
To set the correct time and date on the phone – Press MENU to enter menu;
-
Press or to select HS SETTINGS, then press MENU to confirm
-
Press or to select DATE FORMAT/TIME FORMATI SET TIME.
Change Date/Time Format -
Select DATE FORMAT to set desired date format between MM-DD-YY or DD-MM-YY. Use or to select the selected OK format, then press MENU to confirm; – Select TIME FORMAT to set desired time format between 12 HR or 24HR. Use or to select the selected format, then press to confirm.
Set the Time -
Select SET TIME to set the correct time and date;
-
Press MENU. then display shows SET TIME.
Input correct time, press MENU to set; -
After setting time, display shows SET DATE. Input correct date, press MENU to set.
Alarm Settings -
Set an alarm clock on this phone. When an alarm is set, shows on display. When the alarm time is reached, the phone rings with the alarm melody for 45 seconds, and, the D and “ALARM ON” on display flash. Press any keys on handset to disable the alarm. If SNOOZE is ON, the alarm will alert again at then end of snooze period of 7 minutes. Press and hold to stop the SNOOZE.
Press MENU to enter menu; -
Press MENU to select HS SETTINGS, then MENU to confirm;
-
Press to select ALARM, press MENU to confirm;
-
Press to select ON/OFF for alarm function; Select ON, then press MENU to confirm.
-
Display shows SET TIME, input alarm time then press MENU to set; OK
-
Display shows SNOOZE, use / to select ON/OFF for snooze function. HANDSET SETTING Handset can be customized according to your preference by accessing HS.
SETTINGS to select the settings.
-
Press MENU to enter menu;
-
Press to select HS SETTINGS, the press MENU to confirm;
-
Press to select RING SETUP/TONE SETUP LANGUAGE/RENAME HS/AUTO ANSWER, then MENU to confirm the selection. OK
-
Set the Ringer Melody and Volume Ringer melody and Ringer volume can be set in different scenarios, INTERNAL RING and EXTERNAL RING. Note: Total 5 different melodies and 5 different Tones for selection.
Set Ringer Melody for Internal Call -
Select RING SETUP press to select INT. RING, there press MENU to confirm;
-
Set Ringer Melody for External Call – Select RING SETUP press /to select EXT. RING, there press MENU to confirm;
-
Press to select the desired ringer, then press MENU to Confirm
Set Ringer Volume -
Select RING SETUP press to select RING VOLUME then press to confirm;
-
Press to select the desired volume from Level 1-5, then press MENU to confirm.
Set Alert Tones Alert tone can be set ON or OFF when:
-
Press a key
; -
Battery is low and needs charge for handset <BATTERY TONE
-
Handset and Base is out of range
.
To set Alert Tones ON/OFF: -
Select TONE SETUP. press to select KEY TONE/ BATTERY TONE/OUT OF RANGE to set alert tone, then MENU to confirm selection;
-
Select ON to turn on the alert tone, or, OFF to turn off.
-
Set Language on Handset – Select LANGUAGE, press to select the language, then press MENU to confirm.
Note: -
Total 7 different languages for selection.
-
Rename the Handset OK – RENAME HS, input name of the handset, then press MENU
Set the Auto Answer -
When Auto Answer is on, call answers automatically when you pickup the handset from cradle. Select AUTO ANSWER, press to select ON or OFF; – Select ON, press MENU , to turn on Auto Answer;
-
Select OFF, press to turn off Auto Answer. BASE SETTING Handset can be customized according to your preference by accessing HS SETTINGS to select the settings.
-
Press MENU to enter the menu;
-
Press to select BS SETTINGS, then MENU to confirm;
-
Press to select DELETE HS/DIAL MODE/FLASH TIME/CHANGE PIN/ECO OK MODE, then MENU to confirm the selection.
-
De-register a Handset To de-registered a handset from the Base, 4-digit PIN need to be input. The ill on the de-registered handset will blink. Select DELETE HS, then input 4-digit system PIN, press enter
-
Press to select one of the handset when need to be de-registered, then MENU to confirm. Note: If PIN correct, handset will go to next step. If PIN incorrect, handset will go back to previous level.
-
Change the dial mode Select DIAL MODE, press to select TONE or PULSE, then MENU to confirm.
-
Change the Flash Time The flash time settings is country dependent and needs to contact Local Service Provider for the correct settings.
-
Select FLASH TIME, press to select SHORT or MEDIUM or LONG, then MENU to confirm
-
Change the system PIN Code A 4-digit system PIN code needs for changing the system settings of the base station. The default system PIN code is 0000.
-
Select CHANGE PIN, then needs to input the existing 4-digit system PIN, then MENU to confirm;: Enter new system PIN code, then MENU. Re-enter the new system PIN code, then MENU to confirm.
Note: -
If PlIN correct, handset will go to next step. If PIN incorrect, handset will go back to previous level. OK OK.
Change the ECO Mode -
The phone can be set in ECO mode for power saving.
-
Select ECO MODE, press I to select ON, then MENU to turn on ECO mode Select OFF, then MENU to turn off ECO mode. REGISTRATION The phone can be registered up to FOUR handsets to a single base station. The handset is not registered to the base station, the ill on display. To register new handset: Press and hold ( on the base station for about 5 seconds, the base station is entered into registration mode;
-
Press MENU to enter menu, then to select REGISTRATION, then OK and 4-digist system PIN code need to input, then MENU to confirm. If the handset registration is successful, a confirmation tone will be heard and ill on the registered handset will stop blinking. The handset will be assigned automatically to the next available handset number. Handset number shows in the handset display during standby mode.
f the link on the handset keep błlinking, this means the handset registration is unsuccessful. RESET THE PHONE The phone can be reset to the factory settings. After reset all the settings and call list entries inside the phone will be deleted, except PHONEBOOK remains unchanged. – Press MENU to enter the menu; then to select DEFAULT, then MENU – 4-digist system PIN code need to input, then MENU to enter Display shows CONFIRM?, press MENU to confirm. TROUBLESHOOTING As a general rule, if a problem occurs, remove the batteries from all handsets for about 1 minute, then disconnect and reconnect the power supply to the base and reinstall the handset batteries. For more information, you can download full user guide or get on-line assistance www.brondi.it SAFETY This telephone is not designed for Emergency calls when the main power fails. Do not use your telephone to notify a gas leak or other potential explosion hazard. Do not open your device or its power supply to avoid risk of electrical shock. Do not attempt to open the batteries, as they contain hazardous chemical substances. Your telephone must be located in a dry place away from hot, humid and direct sunlight condition. To avoid radio signal interference, place the phone at least 1 meter away from other electrical appliances or other phones.
Technical informations: DECT(Base & Handset) frequency: 1822-1897MHz Maximum transmission power: 24dBm. NOTICE :If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment FC-0914 does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or qualified installer. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. SERVICE According to FCC regulation. This equipment which has been certified and registered by the FCC, may only be repaired by authorized person, the FCC certification may be voided. Should you encounter any problems, please call the FUTURE CALL LLC. Toll-free Customer Hotline for assistance: 1-888-934-CALL, Monday – Friday between the hours of 9:00 am – 6:00 pm PST For general inquires, you can E-Mail to [email protected] or visit our website at www.future -call.com FOR WARRANTY AND OUT-OF WARRANTY SERVICE: You may call our toll-free hot line on 1-888-934-CALL (1-888-934-2255)9AM- 6PM PST or E-mail to help future call.com QUESTIONS? STOP.. doesn’t take unit back to the store. LOOK ..for the toll-free “help” telephone number LISTEN… as our experts talk you through the problem.
For immediate answers to your questions regarding operation, missing parts or installation call: FUTURE CALL LLC HOTLINE & E-MAILAT: 1-888-934-CALL& help @future-call.com LIMITED WARRANTY AND SERVICE FUTURE CALL LLC. Warrants this product to be free from defective materials or factory workmanship and will replace or repair this unit or any part thereof, except batteries, if it proves to be defective in normal use or service within 90 days from date of original purchase. Our obligation under this warranty is the repair or replacement of the defective instrument or any part thereof, except batteries. This warranty will be considered void if unit is tampered with, improperly serviced, or subjected to misuse, negligence or accidental damage. There are no other express warranties other than those stated herein. This warranty gives you specific legal rights, and you may also have other rights which varies from state to state. TO OBTAIN SERVICE PLEASE E-MAIL US ON help@future- call.com OR CALL US TOLL FREE 1-888-934-CALL 9AM-6PM PST(1-888-934-2255). IF THE UNIT IS UNDER WARRANTY PROOF OF PURCHASE MUST BE PROVEN.