IMPECCA W-TL4002NS-697 40-in 1080P LED Indoor Use Only Flat Screen User Manual

June 9, 2024
IMPECCA

IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat
Screen W-TL4002NS-697 40-in 1080P LED Indoor Use Only Flat Screen User Manual

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighthing flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock
The exclamation pcint within en equilateral Wangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
CAUTION: TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there Is no guarantee that Interference will not occur in a particular installation. If this equipment does cause harmful Interference to radio or television reception. which can be determined by turning the equipment off and on. the user Is encouraged to try to cored the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Conned the equipment into an outlet on a circuit different from that to which the receiver Is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
FCC Declaration or Conformity Compliance statement (Part 15):
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received. Including interference that may cause undesired operation. The party responsible for compliance to these rules is: IMPECCA USA Wilkes Barre, PA https://www.impeoca.com service@impecca.com

CHILD SAFETY

Flat-panel displays should always be placed on proper, stable surfaces or installed according to the manufacturer’s recommendations. Flat-panel displays that are inappropriately situated on dressers, shelves, desks, carts, and so forth may fall over and cause injury. Don’t allow children to climb on or play with the television and its surroundings. Don’t place the TV on furniture that can used as steps, such as a chest of drawers. Remember that children can become excited while watching a program, especially on a larger than life° flat-panel display. Place or install the TV where it cannot be pushed, pulled, or knocked down. Route all cords and cables connected to the flat-panel display so that they cannot be pulled or grabbed by curious children. The warranty does not cover product failure due to improper installation. The unit and its acces-sories should not be adjusted or repaired by anyone except qualified service personnel.
PROPER DISPOSAL
This marking indicates that this product should not be disposed of with other house-hold waste. To prevent possible harm to the environment or human health from uncon-trolled waste disposal, it should be disposed of at the disposal center recommended by your municipality.
Please read and adhere to all safety instructions in this User Guide. All governing codes and ordinances must be observed.
If you are uncomfortable or unable to perform any of the steps in this guide, please consult a certified professional.

SAFETY: ELECTRICAL GROUNDING

DANGER: ELECTRICAL SHOCK HAZARD Touching the internal components of this device can cause serious personal injury or even death. Do not disassemble this unit. Improper use of the grounding plug can result in electric shock. Do not plug the TV into an outlet unless the outlet is properly installed and grounded.
THREE-PRONGED (GROUNDING) PLUG This unit must be used with a properly installed and grounded 100-240 volt 60 Hz, 20 amp AC outlet. In the event of an electrical short circuit, grounding reduces the risk of electric shock by pro-viding an escape wire for the electric current. This unit is equipped with a grounding-wire cord with a third, round grounding plug. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood or if doubt exists as to whether the unit is properly grounded. If an extension cord is used with this unit:

  • The marked electrical rating of the cord should be at least as great as the electrical rating of the unit.
  • The extension cord must be a grounding-type 3-wire cord
  • The extension cord should be arranged so that it will not drape over the countertop or table-top where it can be pulled on by children or tripped over.

****SAFETY: ADDITIONAL WARNINGS

  1. Carefully review all of these instructions and warnings in the BEFORE operating your TV. Failure to do so may cause fires, damage, injury, or bodily harm.
  2. Do not use this product near water.
  3. Clean only with a dry cloth.
  4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  5. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
  6. Protect the power cord from being walked on or pinched.
  7. Only use attachments/accessories specified by the manufacturer.
  8. Use only with a cart, stand, bracket, or table allowed by the manufacturer. If a cart is used, use caution when moving the it to avoid it tipping over and causing injury.
  9. Unplug this unit during lightning storms or when unused for a long period of time.
  10. Refer all servicing to qualified service personnel. Servicing is required when the Nor its or cord has been damaged in any way, such as the unit being dropped or exposed to water.
  11. NEVER expose this product to water, rain, or moisture. Objects filled with liquids,such as vases, should not be placed on or near the TV or its cables.
  12. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
  13. Do not overload wall outlets and extension cords, as this can result in fire or electric shock.
  14. Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit
  15. This unit should only be serviced by qualified service technicians. Contact technical support for information regarding your closest authorized service center for further examination, repair, or adjustment to your unit.
  16. Do not immerse the cord or plug in water. Keep the cord away from hot surfaces. Do not let the cord hang over the edge of a table or stand. Do not operate this unit if the cord or plug is damaged or is not working correctly.
  17. If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of ground-ing conductors, location of antenna discharge unit, connection to grounding elec-trodes, and requirements for the grounding electrode.
  18. When replacement parts are required, be sure the service technician uses replace-meant parts allowed by the manufacturer. Unauthorized substitutions may result in fire, electric shock, or other hazards
  19. Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
  20. When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner’s manual of the other equipment carefully and follow the instructions when making any connections.
  21. Sudden high volume sound may cause hearing or speaker damage. When you use headphones (if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use headphones continuously with high volume sound, it may cause hearing damage.
  22. Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire.
  23. If the TV screen is broken, DO NOT touch the the panel.
  24. Lastly, this reminder is provided to call the cable N system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in par-ticular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

WHAT’S IN THE BOX?

You should have received the following in the box along with this manual:
LED TV, power cable and attachable feet

IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen -
FigRemote Control
INSTALLING THE BATTERIES To use the remote, you must first install the batter- ies. Ensure they are inserted facing the correct di-rection, matching the + and – symbols in the battery compartment of the remote.

IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen -
Fig NOTE: Do not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad,ni-mh, etc.) batteries.

INSTALLING YOUR TELEVISION

INSTALLATION PROCEDURE

  1. Have a second person help you unpack the TV. Open the box and remove the TV, along with its accessories. Place the TV facedown on a soft, stable surface that can bear its weight.

  2. Carefully place the provided stands/feet into the bottom of the TV. The feet will either snap into place, or some models will require screws to secure the stand/feet. If there are screws provided, insert and tighten the 4 screws found in the accessory bag (BA 4 *18mm). Make sip the feet are secure so that the Ty has a solid stand.IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen - Fig

  3. Carefully place the TV on a secure stand/shelf.
    WARNING: To avoid danger, please do not install the TV near water or extreme heat (such as a furnace, light source, or candle). Do not block the ventilation on the back of the TV. When placing it on a shelf, 10 cm (4 inches) of free space must be available around the en-tire unit.IMPECCA W
TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen - Fig
3

  4. Connect all cables to the TV that you will be using, such as HDMI, cable TV, antenna or other cables.

  5. Plug the TV into the wall power outlet (AC 100-240V- 50/60Hz). 6. Turn on the TV. While in standby mode, the power indicator light will be red. Press the power button on the TV or on the remote control to turn on the TV.

Mounting the TV to a wall
To avoid personal injury or damage to your personal property (including this television) professional installation is recommended when mounting this unit to a wall. There are mount-ing holes on the back of the N for which a mounting bracket can be fashioned. The bracket must accommodate the size and weight of this unit The wall and stud must also adequately support the TV.

VIDEO AND AUDIO CONNECTIONS

This television features the following cable connections:

| AV INPUT
External Composite Video Input and Right/Left Audio Inputs.
---|---
| HDMI INPUT (HDMILHDM12,HDMI3/ARC)
Plug in computers, streaming devices, BluRay players and other HDMI devices here
| ANT 75/RF CONNECTION
Connect to the antenna/cable TV output of your device or wall plate
| RJ45
Hardwired internet connection (WIFI also available) (for software updates, movie streaming, etc)
| USB INPUT
Connect to your USB Media/Flash device here
| OPTICAL
Digital Optical audio output

Do not touch or be close to the HDMI, USB terminals, and prevent electrostatic discharge to disturb these Mal% terminals while in USB operation mode, or it will cause the TV to stop working or abnormal status.
AFTER INSTALLATION, BE SURE TO KEEP ALL CORDS AND CABLES OUT OF CHILDRENS’ REACH!

REMOTE CONTROL BUTTONS AND FEATURES

IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen - Fig
4

  1. :Turn on the Ti or enter standby mode.
  2. :Turn on/o6 the sound by pressing this button.
  3. 0-9: Figures 13-9- are used to directly input channel number.
  4. EPG:Press to display Electronic Program Guide and select your favorite channel.
  5. -/–:Press to change the channel which name contains ‘.’.
  6. Input source selection button.
  7. :Press to enter the Home Page.
  8. V-:Increase the volume.
  9. Decrease the volume.
  10. CH+ Channel up.
  11. CH-:Channel down.
  12. :Stan system menu.
  13. INFO :PPM to display the source and channels display.
  14. Ok:To confirm the choice of a highlighted menu item.
  15. : Al V:Press these buttons to move within the menu.
  16. :Press these buttons to move within the menu .
  17. 8ACKGo back to the previous step.
  18. EXIT:Press to exit the OSD menu.
  19. NETRIT:Press to launch NetRix.
  20. WherPress to launch YouTube.
  21. : Press to launch Net-range app store.
  22. : Press to launch VUDU.
  23. .GREEN/REDNELLOWCYAN buttons: Press these buttons according to the different prompts.
  24. :Press to last reverse in US8 mode.
  25. : Press to fast forward in 055 mode.
  26. Press to play the video and press again to pause the video.
  27. Press to display the close caption.
  28. Hold on or off for current page display/PresS to stop in the USB mode.
  29. AUDIO:Press to change the language when play the stream which contains multi-language.
  30. .FAV: Press to open the favorites list.
  31. ASPECT: Select the image scab.
    Note: Depending on the country in which this television is used, some apps may not be available.

GETTING STARTED

Initial Setup
When first turning on the TV and setting it up, you’ll be presented with menus to configure ba-sic settings on the television, for example:
Press to select the language. Press OK to continue.IMPECCA W TL4002NS697 40
in 1080P LED Indoor Use Only Flat Screen - Fig 5 Press to select the input source you’d like to begin with. Press OK to continue.

IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen - Fig
6

Press OK to skip digital or analog channel tuning, or let the automatic tuning phase proceed by itself.

Home Page
Press to enter the Home Page. Use the arrow buttons and OK button to select from the available apps, or so select an input at the bottom of the screen.

IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen -
Fig8

Settings Menu
This is where things like Picture, Sounds, and WIFI are set up.
Press the button on the remote (found by the arrow keys) to enter the system settings menu. Use the buttons to select one of the submenus on the left (Picture / Sound / Setting/ Lock/ Program / Network/About). Press to continue to that submenu. You can then use the A/• buttons to select a setting and to change the value of that setting. Press ra to go back and change to a different submenu.

IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen -
Fig8

Software Updates
In the About section of the settings menu discussed in the prior section, you can up-date the TV’s software either over the Internet or via a USB stick (if available).
Note: If you start an update, do not switch off your TV until the upgrade has completed!

USING USB MEDIA

When you insert a USB flash drive, the TV will acknowledge it. You can select the drive and press OK.

Several different media tor- Then, you can use the arrow keys to navigate the files and mats are supported for your folders of your USB media to playback music, video and USB flash drives. pictures.

IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen -
Fig11

Supported Media Filetype Extensions

Video DAT,V0B,MPG,MPEG,TS,TRP,TP, MP4,MOV,AVI,MKV,WMV,RMVB
Audio MP3,WAV,MP4,AC3,AAC,WMA, M4A,MOV,MKV
Images JPEG,BMP,PNG,MPO

SPECIFICATIONS

Panel Type Led Panel, 40 inches
Screen Format 16:09
Resolution 1920×1080 (1080p)
Brightness / Contrast 230 nits / 5000:1
View Angle 176(H) / 176(V)
Response Time/ Refresh Rate 8.5 ms / 60 Hz
Power Specs 100-240V– 50/60 Hz, 90W
Color System ATSC/NTSC

IMPECCA W TL4002NS697 40 in 1080P LED Indoor Use Only Flat Screen -
Fig12

TROUBLESHOOTING TIPS

PROBLEM POSSIBLE CAUSE
No Power Check to see if the AC cord of the television is properly plugged

into the outlet. If there is still no power, remove the AC cord and replug it after 60 seconds. Attempt to power on the TV again. Ensure the same outlet works with other electronics.
The signal from the antenna is not clear| A double image or ghost could be caused by obstructions of the external antenna. Consult the antenna instruction manual to change the direction of the external antenna. Use of a taller antenna can improve the quality of the images.
No Picture| Make sure that power to the TV is on and the proper input is select-ed and that the cables are securely connected. Make sure your video source (Antenna, DVD, Cable Box) is on and working.
Poor sound or no sound| Adjust the contrast and/or brightness of the TV.
Try to select other channels to be sure the issue is not with the channel. Check to be sure the antenna or cables are connected properly.
Poorolor color or no| Adjust the contrast and/or brightness of the TV.
Try to select other channels to be sure the issue is not with the channel. Check to be sure the antenna or cables are connected properly.
Horizontal or diago – nal lines on screen| If using an antenna, check to be sure the antenna at the back of the unit is connected properly. Make sure the video connection is secure and no inearby units (vacuum, hairdryer) are being used.
The screen is too dark or too light| Adjust the contrast ratio or brightness from the TV’s picture menu.
Picture is very dim| Make sure that the “Power Saving” picture mode is not selected in the Picture menu.
Volume jumps when the source or chan- nel is changed.| This is normal when switching between different broadcast sources. To help minimize this, you can turn on “Auto Volume Limit” in the sound menu to automatically level the volume.
Picture is stretched or seems to cut off.| Try a different picture mode in the picture section of the settings menu
Some channels are blocked| Check the TV’s menu to make sure that channels have not been set as locked.
TV does not respond to the remote| Point the remote directly to the sensor on the TV. Make sure the remote has fresh batteries.
TV menu does not respond, or some apps are having is sues which used to work.| Make sure there isn’t an internet connection issue (check the Network section of the TV’s Settings menu). If the Internet connection is good, go to the About section of the Settings menu and check for a software update for the TV.

CUSTOMER SUPPORT

Before contacting customer support, please see the trouble- shooting guide above. Visit our website to contact us, find answers to Frequently Asked Questions, and for other re-sources which may include an updated version of this user’s manual.
WWW.IMPECCA.COM
If you wish to contact us by phone, please be sure to have your model number and serial number ready and call us between 9:00am and 6:00pm ET, at +1 866-954-4440.
Keep tabs on Impecca’s newest innovations & enter contests via our social network feeds:
www.facebook.com/Impeccable/
www.instagram.com/impecca/
@impeccausa

ONE YEAR LIMITED WARRANTY (US)

Impecca • warrants this product against defects in material and workmanship to the original purchaser as specified below . Please register your product online within fourteen (14) days of purchase.
PARTS – If the product Is determined to have a manufacturing defect, within a period of one (1) year from the date of the original purchase, Impecca 0 will repair or replace the product parts at no charge (for parts) to consumers in the U.S.A. and Canada.
LABOR – if the product is determined to have a manufacturing defect, within a period of ninety (90) Days from the date of the original purchase, Impecca 0 will rep air or replace the product at no charge to consumers in the U.SA. and Canada. After ninety (90) days, it will be the responsibility of the consumer.
Shipping costs to and from our warranty service center are the sole responsibility of the consumer.
To obtain warranty service by an autho rized Impecca service center, please email us at: service@impecca.com to obtain a Repair and Maintenance Authorization (RMA) number and to locate the Warranty Service Center nearest you. Once authorized, you must mail the product to the authorized Impecca ° service center in its original product packaging materials or equivalent, to prevent damage while in transit.
Further, should Impecca e determine that the product is outside of the Warranty terms , Impecca 0 will return the product to sender at sender’s expense without being repaired or replaced, unless authorized by the consumer to service the out-o f-warranty product at consumer’s expense. All handling or restocking charges for returns and/or replacements shall be non-refundable.
Impecca ° specifically excludes from this warranty any non-electric/mechanical attachments, accessories, and disposable parts including, but not limited to, outside case, connecting cables, batteries, and AC adapters. Impecca ° reserves the right to repair or replace defective products with the same, equivalent, or newer models.
We reserve the right to either repair or replace product at our discretion. Replacement may be either new or refurbished and while every endeavor will be made to ensure it is the same model, if same model is not available, it will be replaced with a model of equal or higher specification.
Normal ‘Wear and Tear is not covered by this , or any other, warranty. Further, Impecca 0 hereby reserves the right to determin e “We ar and Tear ° on any and all products. Tamperin g or openin g the product casing or shell will void this warranty in its entirety.
In addition, this warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; has been altered or modified without the written permission of Impecca ‘1; has been serviced by a non -authorized repair center of Impecca €‘; has n of been properly maintained or operated according to the operation manual; has been used for commercial, non- household purposes; has been cosmetically damaged; was not imported by Impecca ‘D; was not manufactured according to specification of the United States market; was damaged due to improper installation or neglect by the consumer; was damaged due to improper packaging in shipment to the Warranty Service Center; was damaged due to natural disasters; or if the serial number for the product has been removed or defaced.
ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO ONE (1) YEAR PARTS AND NINETY (90) DAYS LABOR FROM THE DATE OF THE ORIGINAL RETAIL PURCHASE OF THIS PRODUCT .
THESE WARRANTIES AND REMEDIES ARE THE SOLE AND EXCLUSIVE WARRANTIES AND REMEDIES IN CONNECTION WITH THE SALE AND USE OF THE PRODUCT. NO OTHER WARRANTIES, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, ARE GIVEN.
IMPECCA IS NOT RESPONSIBLE OR LIABLE FOR ANY DAMAGE, WHETHER SPECIAL INCIDENTAL CONSEQUENTIAL, DIRECT OR OTHERWISE, OR WHETHER KNOWN OR SHOULD HAVE BEEN KNOWN TO IMPECCA 8, INCLUDING LOST PROFITS, GOODWILL AND PROPERTY AND PERSONAL INJURY RESULTING FROM ANY BREACH OF WARRANTY, THE INABILITY TO USE THE PRODUCT OR UNDER ANY LEGAL THEORY IN CONTRACT OR TORT. IMPECCA LIABILITY IS LIMITED TO THE ACTUAL PURCHASE PRICE PAID TO THE RETAIL SELLER OF THE DEFECTIVE PRODUCT.
No Impecca adealer, agent , or employee is authorized to make any modification, extension, change or amendment to this warranty without the written consent and authorization from Impecca IL.
Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, or do not allow a limitation on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state.
Important: Be Sure to Register Your Product at within 14 Days
Impecca®USA • PA 18711 WWW.IMPECCA.COM www.impecca.com
service@impecca.com “Do not send any returns to this address, as they may be lost and this will delay your repair and service process.

WARNING

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

  1. Using cabinets or stands recommended by the manufacturer of the television set.
  2. Only using furniture that can safely support the television set.
  3. Ensuring the television set is not overhanging the edge of the supporting furniture.
  4. Not placing the television set on tall furniture (for example, cupboards or bookcases).without anchoring both the furniture and the television set to a suitable support.
  5. Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture,
  6. Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.
Wall-mounted screw:22-24inch M4, 28-70inch M6, 75inch M8 Note:don’t hang at an angle to avoid the risk of falling off.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator,inc. in the United States and other countries.
ENERGY STAR® Qualification.
Enabling certain features and functionality in this product (e.g. Picture Mode, Volume) may increase its energy consumption, possibly beyond the limits required for ENERGY STAR® qualification. This product has earned the ENERGY STARNualification meeting US Federal Energy Efficiency guidelines as established by the Department of Energy and Environmental Protection Agency. The ENERGY STAR®program exists to provide energy saving guidelines and help promote energy efficient products and practices. Power Saving Mode is the mode in which the product qualifies for ENERGY STAR® .

This user manual for reference only

Documents / Resources

| IMPECCA W-TL4002NS-697 40-in 1080P LED Indoor Use Only Flat Screen [pdf] User Manual
W-TL4002NS-697 40-in 1080P LED Indoor Use Only Flat Screen, W-TL4002NS-697 40-in 1080P LED Indoor Use Only Flat Screen, Indoor Use Only Flat Screen
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals