Earphones G6 Business Headset User Manual
- June 6, 2024
- Earphones
Table of Contents
Earphones G6 Business Headset
What’s in the Box
Package Contents
- Business Headset x 1
- Eartips x 6(Includes one on headset)
- Type-C Charging Cable x 1
- User Manual x 1
Product Overview
- MFB (Multi-Function Button)
- Volume+
- Volume-
- Mute Button
- LED Indicator
- Main Microphone
- Second Microphone
- Charger Port
Basic Operation
LED Indicator
Charging
Connect the headset to a computer or the USB power adaptor (not included) via
the USB cable. Plug the USB power adaptor into an electric socket,
Your new headset has enough power to pair and make a few calls before charging. though you may charge at any time,
Wear on the left or right
To wear the headset on your other ear, rotate the boom upwards then twist it
around so the ear tip is on the other side before lowering the boom, Rotate
the ear tip and adjust the retractable ear hook to fit the shape of your
ear.
Pairing and Connection
In off status, press MFB to power on and automatically enter into pairing mode with LED Green &Red flash alternately.
- Connect for the first time, search and click to connect G6″ on lists, LED off after the connected success
- When there is a pairing record, press MFB to power on and enter into the auto-connect state,
Basic Specification
Safety Instruction
- Do not place the headset near naked flames sources, Such as candles or ovens.
- Do not expose the product to direct sunlight.
- Press the function bottom gently; pressing too hard might shorten the lifetime of the function.
- Do not drop the product on a hard surface. This may result in damage of the product,
- Do not place the headset near the TV, speaker, or other objects that generate strong magnetic fields.
- When the headset is affected by a strong magnetic field or by other interference simply turn it off to reset the headset to resume normal operation
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) his device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference o radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Inerease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>