kanto SDS150 Desktop Security iPad Stand User Manual
- June 4, 2024
- Kanto
Table of Contents
User Manual
SDS150 / SDS150W
DESKTOP SECURITY IPAD STAND
Supporting your digital lifestyle™
Thank you for choosing Kant
Read these instructions fully before assembly and installation. If you do not understand these directions or have any doubts about the safety of the installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts. Do not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting, or incorrect use of this product. If there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.
CAUTION
This desktop security tablet stand is intended for use with only the 10.2”
iPad. Use with products other than the tablet indicated may result in
instability due to incorrect fit.
1-888-848-2643
support@kantoliving.com
Supplied Parts and Hardware
Tools (Optional)
Phillips Screwdriver| Drill| Pencil| Wood Bit
Project Overview
- Assemble Base
- Mount Base (Optional)
- Install Caps (Optional)
- Install Case
- Install iPad
- Manage Cables
- Finalize Adjustments
IMPORTANT!: Please read this entire document before attempting assembly.
If you have any problems or difficulties while following these instructions,
please contact Kanto directly: Email:
support@kantoliving.com
Toll Free: US & Canada: 1-888-848-2643
Assemble Base
Mount Base (Optional)
CAUTION
The SDS150 is intended to be installed on wood surfaces only.
Install Caps (Optional)
Install Case
Manage Cables
Install iPad
Finalize Adjustments
Limited Warranty to Original Purchaser
Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free
from defects in material for the limited warranty period of 5 years.
If equipment fails because of such defects and Kanto is notified within 5
years from the date of shipment with proof of original invoice from an
authorized reseller, Kanto will, at its option, provide replacement parts or
replace the equipment, provided that the equipment has not been subjected to
mechanical, electrical, or other abuse or modifications. Any replacement
parts or replacement units are warranted for 90 days from the day of
reshipment to the original purchaser.
Customers will be responsible for obtaining a Return Authorization Number and
paying shipping costs to return the product to a Kanto location or authorized
depot. If the equipment is covered under the warranty provisions above, Kanto
will replace parts or provide a replacement unit, and be responsible for
shipping costs to the customer. Please keep the original packaging to prevent
damage to the product during shipping. Insuring your shipment is also
recommended.
The information in the manual has been carefully checked and is believed to be
accurate. However, Kanto assumes no responsibility for any inaccuracies that
may be contained in the manual. In no event will Kanto be liable for direct,
indirect, special, incidental, or consequential damages resulting from any
defect in the equipment, even if advised of the possibility of such damages.
This warranty is in lieu of all other warranties expressed or implied,
including without limitation, any implied warranty, including any warranty of
merchantability and fitness for any particular purpose, all of which are
expressly disclaimed.
www.kantomounts.com
support@kantoliving.com
Toll-Free: 1-888-848-2643 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>