MARVEL MLCP215-IS01B Ice Machine with BrightShield and Drain Pump User Manual
- June 9, 2024
- Marvel
Table of Contents
MARVEL MLCP215-IS01B Ice Machine with BrightShield and Drain Pump User
Manual
Welcome to the Marvel Experience
Congratulations on your purchase of the industry’s quietest clear ice machine with the best ice clarity and purity. Your new investment is protected by a limited warranty for the first year, and hermetically sealed refrigeration system part are covered for an additional 4 years.
Here’s your guide to the operation and maintenance of your Marvel Clear Ice Machine to ensure years of enjoyment. If you have any questions, please contact Marvel Customer Service or Tech Support at: Phone: 616-754-5601 Email:
- Customer Service: orderdesk@marvelrefrigeration.com
- Tech Support: techsupport@marvelrefrigeration.com
Got a Marvelous Design?
We would love to see how your Marvel product looks in its new home. You can
send us photos of your installed product at
marketing@marvelrefrigeration.com,
and we might feature your Marvel home design on our website and social media!
Warranty Registration
It is important you register your product warranty after taking delivery of your appliance. You can register online at www.marvelrefrigeration.com.
- The following information will be required when registering your appliance:
- Serial Number
- Date of Purchase
- Dealer’s name and address
Online registration available at marvelrefrigeration.com
The serial number can be found on the serial plate which is located inside the cabinet on the left side near the t
INTEGRATED PANEL DIMENSIONS
15″ (38.1 cm) wide appliance
NOTE
- Panel thickness may be 5/8″ or 3/4″
- Center the unit in the 24″ opening
- If the hinge side of the product is pressed against the adjacent cabinet, use a 5/8″ thick panel
- The window cutout is for glass door models only
- Do not use a solid door panel on a glass door model
| Door Type | Maximum Panel Weight |
|---|---|
| Solid | 15 lbs |
| Frame Glass | 10 lbs |
INTEGRATED PANEL INSTALLATION
Panel Installation
5/8″ (1.6 cm) or 3/4″ (1.9 cm) panel
14 5/8 (37.1 cm) width 29 21/32″ (75.3 cm) height
-
Fully open door.
-
Starting at corner, pull gasket away from door.
-
Continue to pull gasket free from gasket channel.
-
Upon removal, lay gasket down on a flat surface.
-
Align top of panel with top edge of door. Center panel on door.
Due to differences in floor construction or surrounding cabinetry, the panel may not sit flush with the top of the door. -
Secure integrated panel to door using clamps. A robust tape may also be used. Marvel recommends the use bar clamps to secure the panel to the door. If using tape. be certain the tape will not damage panel finish upon removal.
-
Using a 7/64″ (3 mm) drill bit, drill 6 pilot holes into the wood panel 1/2″ (12 mm) deep using the holes in the door frame as a guide.
It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardwood is installed. -
Locate 6 of the #6x 1-1/2″ (38 mm) screws provided with your unit.
-
Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not over-tighten screws.
-
Ensure the screws sit flush against the bottom of the channel.
-
Remove clamps from door.
If panel requires additional adjustment after removing clamps, slightly loosen each screw and adjust panel as necessary. Tighten screws upon completion. -
Starting at the corners, re-install the gasket into the gasket channel in the frame. Make sure the gasket is fully seated.
References
- Premium Undercounter Products for Home & Outdoor | Marvel Refrigeration
- Premium Undercounter Products for Home & Outdoor | Marvel Refrigeration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>