denver MIR-270 Music System CD Internet Radio AUX Instruction Manual

Denver MIR-270 Music System CD Internet Radio AUX

Product Information

• Model: MIR-270
• Website: www.facebook.com/denver.eu

Safety Information:

• This product is not a toy. Keep it out of reach of children.
• Keep products out of the reach of children and pets to avoid chewing and swallowing.
• Never use old and new batteries or different types of batteries together. Remove the batteries when you
• Class 1 Laser Product: Warning: Do not touch the lens.

DAB Radio Signal:
Please notice that the DAB signal can be weakened depending on the type of building you are living in. For example, it can be hard to catch proper signals when being in a concrete building. Signals can also be different in different areas of the country. Please check your local transmitter to get the best signal in your area.

Product Overview

Front View:

Rear View:

1. Display screen
2. Standby button
3. Stop on CD mode / USB
4. Play & Pause on CD/ BT/ USB
5. Menu button
6. Volume/ Navigata KNOB/Select/ OK button
7. FAV button
8. Backward button
9. Forward button
10. Eject Disc
11. DC 12V IN
12. Aux In Jack
13. Headphone jack
14. USB port
15. Antenna
16. AC/ DC adaptor

Remote Control:

1. Eject Disc
2. OK / Play & Pause button
3. Volume +
4. Mute button
5. Alarm button
6. Program button
7. Forward button
8. Stop button
9. FAV
10. EQ set tone
11. Numbers and letters
12. Backward button
13. Sleep button
14. Local button
15. Home
16. Navigate up / down/right/left
17. Standby

Product Usage Instructions

Initial Setup
To configure the network connection between the router and MIR-270:

1. Press Standby into Standby.
2. If prompted, select the network configuration option and follow the instructions on the display.
3. If no network configuration is needed, select “No” when prompted.
4. Once the actual date and time are shown on the display, the network configuration is complete.
5. The date and time, as well as any activated alarms, will still be shown on the display when in standby mode.

Internet Radio
To use Internet Radio:

• Use the navigation buttons on the device or the remote control to select “Internet Radio” from the main menu.
• Choose a category such as “My Favorite,” “Country/Location,” “Genre,” or “History.”
• Within each category, select a station to listen to. You can also use the “Search” option to scan QR codes.

Media Center
To access the Media Center:

• Use the navigation buttons on the device or the remote control to select “Media Center” from the main menu.
• If available, scan the QR code to connect to MediaU and display your MediaU station list.
• You can also access MAC information and system configuration settings.

AUX (Line Input)
To play audio from an external source with line out:

• Use the navigation buttons on the device or the remote control to select “AUX” from the main menu.
• Connect your external audio source to the AUX input jack.
• Adjust the volume on the radio or audio source device if required.

Bluetooth
To use Bluetooth mode:

• Use the navigation buttons on the device or the remote control to select “Bluetooth” from the main menu.
• Activate the Bluetooth pairing mode on your phone or tablet.
• Search for “Denver MIR-270” and click to pair.
• Adjust the volume on the MIR-270 or the connected device.

FM (Radio), DAB (Digital Radio), CD Player
To use the FM radio, DAB radio, or CD player:

• Use the navigation buttons on the device or the remote control to select the desired mode from the main menu.
• Follow the on-screen instructions to tune in to radio stations or play CDs.

Program Playback
To create and play a program of selected songs:

1. Select the desired mode (CD, USB, etc.) and navigate to the desired song.
2. Press the “Program” button to enter program mode.
3. Select additional songs to add to the program.
4. Press “Play/Pause” to play the programmed songs.
5. To exit program mode, press “Eject Disc” or “Stop” twice.

Note: If a track generates an error, try renaming the track or converting it to a different format.

Please refer to the user manual for more detailed instructions and troubleshooting information.

Safety information

Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.

1. This product is not a toy. Keep it out of reach of children.
2. Keep products out of the reach of children and pets to avoid chewing and swallowing.
3. Never use old and new batteries or different types of batteries together. Remove the batteries when you are not using the system for a longer period. Check the polarity (+/-) of the batteries when inserting them into the product. Wrong positioning can cause an explosion. Batteries are not included.
4. Product operating and storage temperature is from 0 degrees Celsius to 40 degrees Celsius. Under and over this temperature might affect the function.
5. Never open the product. Touching the inside electrics can cause electric shock. Repairs or services should only be performed by qualified personnel.
6. Do not be exposed to heat, water, moisture, or direct sunlight!
7. Please protect your ears against loud volume. Loud volume can damage your ears and risk hearing loss.
8. The unit is not waterproof. If water or foreign objects enter the unit, it may result in fire or electric shock. If water or a foreign object enters the unit, stop use immediately.
9. Only charge with the supplied Adaptor. The direct plug-in adapter is used as a disconnect device, the disconnect device shall remain readily operable. So, make sure there is space around the power outlet for easy access.
10. Do not use nonoriginal accessories together with the product as this can make the product functionality abnormal.

Class 1 Laser Product

Warning : Do not touch the lens.

DAB Radio Signal

Please notice that the DAB signal can be weakened depending on the type of building you are living in. For example, it can be hard to catch proper signals when being in a concrete building. Signals can also be different in different areas of the country. Please check your local transmitter to get the best signal in your area.

PRODUCT OVERVIEW

Front view

Rearview

Remote Control

INITIAL SETUP

Before the operation, please make sure that the VOLTAGE mentioned on the power supply is the same as the voltage of your local area. Use the supplied mains adaptor to connect the device to a household mains socket. To set Language and Network Configurations at first time running, set up the network connection or set it up later. Use KNOB to select the desired option. Press KNOB to confirm.

Network configuration

1. Normal network configuration: Select “Yes” for the normal Wireless Network Configuration: Then select the required AP by turning KNOB and confirm it by pressing KNOB. Enter WEP or WPA code to connect WiFi network by selecting the correct character and turning KNOB. Press Forward to select the next character or press Backwards to turn left and delete the left characters. When the password is completed please press KNOB to confirm.
   Note : Below characters are available for the radio: Numbers(from 0-9), English letters(from A to Z and from a to z); Other charcters(DEL,@,Blank,!,”,#,$,%,&,*,’,+ and (,)

2. WPS PBC network configuration: Pressing the WPS button on the router and selecting YES(WPS) on MIR-270 within 120 seconds. The connection between the router and MIR-270 will be configured automatically.

3. No network configuration: Select “No” when you do not want to install . Press Standby into Standby. When the actual date and time are shown the network means the configuration is well done. Date and time, as well as alarms- if activated still be shown on the display when in standby mode.

INTERNET RADIO
Use KNOB to select INTERNET RADIO from the Menu and scroll through the different menu options and select the desired option by pressing KNOB. Pressing Forward or Backward to change the station information after successfully connecting to a radio station.

Internet Radio menu options:

• My Favorite: Total 250 favorite entries including stations and folder. During the station playing screen, press and hold FAV to save the station as my favorite. Replace saved favorites with a new favorite station, and Favorite radio stations cannot be stored twice. Press FAV to enter the saved station list, move to the station; press KNOB to listen.
• Radio Station: Stations are categorized into Global Top 20, Genre, and Country/Location (Africa, Asia, Europe, Middle East, North America, Oceania/Pacific, and South America ) /Highlight. Enter to continue the subcategories and choose the station to listen to.
• Sleep Radio: Choose Birds, Lullaby, Piano, Rain, Spa, Space, Wave, and White Noise as sleep radio.
• History: List of ten recently listened to stations.
• Service: Search Radio Station: Enter a station’s/keyword to search through the list of all radio stations.
• Add New RadioStation: By using an IP address/web address, the added station will be stored in the ‘My Favorite’ list. Note: The maximum character of the station name is 250.
• APP: Scan the QR code.

POD CAST

• My Favorite: Same as Internet radio.
• Country / Location: Enter to continue the subcategories and choose the station to listen to.
• Genre: Enter to continue the subcategories and choose the station to listen to.
• History: List of the ten recently listened to stations.
• Search: Scan the QR code.

MEDIA CENTER

Select Podcast, USB, or UPnP mode with KNOB.

• USB : Insert a USB memory stick into the USB socket and select USB from the MEDIA CENTER. Browse folders/files with KNOB and press KNOB to select to play.
  • Note : The USB port does not support charging or data transfer with a computer.
• UPnP : Connect PC and Radio to the same network, Open the UPnP platform Windows Media Player (11 or later), or other platforms, and allow to share the media to MIR-270. Add the audio files and folders to share with MIR-270 to the media library. Then select the shared media at UPNP. If more than one computer sharing media, the alternatives are listed.
  • Note : file names less than 40 characters in European Language. If a track generates an error, try to rename the track. If it still can’t play, convert the track to a different format. My media

Scan QR code to mediaU. Display and playback your media station list on the media server. MAC info: menu -> configuration > Device > System information > Wireless Info;

CONFIGURATION

• Time Display: Analog/Digital (Blue/ Green / Orange / Red / White)
• Manage my mediaU: My mediaU will show on the main menu if enabled. If various media accounts exist on the Radio, Select the default login account here.

NETWORK

• Wireless Network Configuration: Enable/disable WiFi network. Automatically select the required AP if enabled. Enter WEP or WPA code to connect to the WiFi.
• Wireless Network (WPS PBC): If a router with WPS/QSS button, set up the network connection easily via the WPS function. Enter it and press the WPS/QSS button on the router within 120 seconds, then connect the router and device.
• Manual Configuration: Choose DHCP (which assigns the IP address automatically) or manually input the IP address for the wireless network connection. The following information has to be entered: SSID (name of access point), IP Address, subnet mask, default gateway, preferred DNS server, and alternate DNS server.
• Check Network When Power On: Enable/disable the WiFi network. The system will automatically search for available AP if enable WIFI network.
• Date & Time: Set Date and Time (Manual Setup / Auto Detect)
• Set Time Format: 12 Hour or 24 Hour
• Set Date Format: YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY
• Alarm: Alarm 1, Alarm 2, and NAP alarm. Setting the alarm -Select Alarm 1 or Alarm 2, turn it on, Press KNOB on “Repeat”, select every day, once, or select the required days.
• Press KNOB on “Time: 00:00”, turn KNOB to change the highlighted Hours, and press Forward once to switch to the Minutes, and press KNOB to confirm.
• Select the “Sound: ” Beep, Melody, Internet Radio, FM, DAB/DAB+, USB, CD mode.
  • Note : When no internet connection is available within 1 minute after the alarm is activated MIR-270 will automatically switch to Melody.
• Setting the NAP alarm: NAP alarm, Choose 5/10/20/30/60/90 or 120 mins and press KNOB to confirm When the NAP alarm is activated, a clock icon on the lower right corner with the remaining time.
• Alarm Volume: Choose Alarm Volume to configure the volume of the alarms.
• Timer: Countdown timer (max. 100min)
• Scheduled playing: Select Repeat: Everyday, Once or Mon to Sun
• Select Time: HH: MM Select Sound: Internet Radio, FM, DAB/DAB+
• Language: English/Deutsch/Espanol/Francais/Portugese/Nederlands/Italiano/Pyccknn/Svenska/Norsk bokmal/Dansk/magyar/Cesky/Slovensky/Polski/Turkce/Suomi/Ελληνικά
• Dimmer: Power Saving/Turn On
• Display: Color/Monochrome
• Power Management: This option configures when MIR-270 should go into standby mode. Select Turn off/5 minutes/15 minutes/30 minutes. Use the Turn off setting to ignore the standby function.
• Sleep Timer: Turn off or set a sleep timer of 15/30/60/90/120/150/180 minutes. Once the time is set, a bed icon with the remaining minutes is at the top right corner of the display, and the device will turn to standby after the configured time.
• Sound Quality: High or Low
• Weather: Activate/deactivate the weather forecast on standby display. Choose your preferred temperature unit (°F or °C) and proceed by entering the location. When activated, the weather forecast is shown in turns with the clock display on the standby screen (it changes every 10 seconds).
• DAB/FM Setup: FM Mode: Set Mono or Set Stereo / FM Sensitivity: Strong, default or Weak /
• DAB Sensitivity : Strong , default or Weak / Service following(FM-IR): Enable or Disable / Service following(DAB-IR): Enable or Disable
• Local Radio Setup: Press Local Station to enter the local radio station list directly.
• Playback Setup: Play mode Off (no repeat or shuffle), Repeat all, Repeat one, or Shuffle.
• Menu: Add or cancel the functions on the main menu.
• Device: Check the system information, Rename, and scan the QR code to download the APP and Privacy.
• Equalizer: Normal, Flat, Jazz, Rock, Soundtracks, Classical, Pop, News, or my “EQ”. Press the “EQ” button on the remote control to quickly change the equalizer mode.
• Resume When Power On: Select on or Off
• Software Update: Disconnecting the power during a software update may permanently damage the unit.
• Reset to Default: Restore to default settings.

AUX (Line input)

• Select AUX in mode from the Main menu, and play audio from an external source with line out.
• Adjust the volume on the Radio or audio source device if required.

BLUETOOTH

• Select Bluetooth mode from the Main menu. Activate the Bluetooth pairing mode of the phone/tablet, search Denver MIR-270, and click to pair. Adjust volume at MIR-270 or the connected device.

FM (RADIO)

• Select FM mode from the main menu, FM mode will start on 87.5MHz.
• Press KNOB, “auto scan?” choose YES to start the auto scan and save all the stations with a strong signal. Once completed, stations will be saved in your favorites. Holding down Forward or Backward to skip between saved stations.
• Press Forward or Backward to go through the frequency wave by manually scrolling.
• Pre-setting your favorite FM stations
• Select and listen to the station frequency number for the station to save. Press and hold “FAV” and the number ‘01’ will display on the screen. Use KNOB to browse through preset numbers(up to 99) and select the number to save it by pressing KNOB.
• Recalling preset FM stations
• Press FAV to view your favorite FM stations and begin scrolling through saved stations.

DAB (DIGITAL RADIO)

• Select ‘DAB/DAB+’ from the main menu. On first use of DAB, DAB mode begins scanning for DAB stations and ‘Scanning’ on the display screen. It will display how many stations have been found as the search continues. Scroll through with KNOB to select the station and press KNOB to play. Press Backwards to go back to the main list page to rescan the DAB stations and there will be a reminder ‘Delete station list?’.Choose ‘YES’ to do rescan. Pre-setting your favorite DAB/DAB+ stations
• Press and hold FAV to go to the ‘Add to my Favorite’ screen. Turn KNOB to choose the preset number(up to 99) and select it by pressing KNOB. Or highlight the chosen station on the list screen of DAB stations and press and hold FAV to go to the “Add to my Favorite” screen.
• Recalling preset DAB/DAB+ stations
• Press FAV to view the favorite and begin scrolling through the saved stations.

CD PLAYER

• Select ‘CD’ on the main menu. The display screen for the CD function will show “Reading…” followed by “No Disc”.
• Press Eject Disc, Insert the CD slightly and the drive will take the CD into the system to play. Album artwork will be displayed on the screen. Not all CDs will display album artwork.

CD Functions

• Press Backwards / Forward to skip between songs. To skip rewind/forward through a song playing, press and hold Backwards / Forward and release to stop skipping.
• To eject the CD, press Eject Disc. Press Stop to stop the album. Press Play/Pause to begin listening again.

Arrange a CD song program

1. Program the CD player to play songs in a particular order, When the CD is on, press Stop. Simply press Program on the remote to step into the state of programming.
2. The display will show P1 001 to display the first song on the CD as 001. Choose one of the songs as program number 001 by pressing Backwards and Forward to scroll through to choose and, press Program to select
3. The display will show P2 002 to show program 2. Choose one of the songs as program2, and press Program to select. Song number show 001 for CD song number 1, 010 for CD song number 10, etc.
4. After finished program song selection, press Play/Pause to play the songs that have been programmed. Press Stop to exit the “Program” when programming. When the Program playback is activated, press Eject Disc or Stop twice, then exit the program playback mode.

Technical Specifications

Baihua Community, Guangming District, Shenzhen, 518107, China
Model no.| AD2401202000EU
Input| 100-240V~50/60 Hz, 1A max
Output:| 12.0 V         2.0A 24.0W
Average active efficiency| 88.39%
10% active efficiency| 84.64%
No-load power consumption| 0.06W
Network| 802.11b/g/n (WLAN) Encryption: WEP, WPA, WPA 2(PSK), WPS
Streaming| UPnP
Supported filetypes| WMA, MP3, WAV, FLAC, AAC, AAC+
Connections| DC, USB, 3.5mm AUX-IN, 3.5mm Line-Out
AUDIO Power output| 2 x 10W RMS
Bluetooth version| 5.0
RADIO| FM 87.5 – 108MHz  /  DAB 170 – 240MHz
Operating conditions| Temperature: 0-35℃          Humidity 5% to 90%
Unit dimension| 380(L) X 210 (W) x 140 (H) mm
Weight| ~3.2KGS

SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Electric and electronics equipment containers materials, components, and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronics equipment is marked with the crossed-out trash can symbol, seen below. The symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately. All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites or be collected from households. Additional information is available at the technical department of your city.

Hereby, Dever A/S declares that radio equipment type MIR-270 complies with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following address: www.denver.eu and then click SEARCH on the topline of the website. Write model number MIR-270 and enter the product page, and the red directive is found under downloads / other downloads.

DENVER A/S
Omega 5A, Soeften, DK-8382 Hinnerup, Denmark www.facebook.com/Dever.eu

References

• Denver A/S
• Denver A/S

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>