ELIBOM BC Lite Bone Conduction Headphone User Guide
- June 3, 2024
- ELIBOM
Table of Contents
ELIBOM BC Lite Bone Conduction Headphone
Warranty
All Elibom product carries a 12-month warranty from purchase date. Please
contact our official mailbox to activate the extra 2-year warranty.
Elibom customer service email:
[email protected]
Product Information
- USB-C Charging Port
- TF Card
- Volume Button
- Multifunction/Power Button
- LED Indicator
- Volume + Button
Turn on the headphones:
Press and hold the Power Button until the LED Indicator flashes blue and red
alfernafely. Speaker will say:”Power on”.
Turn off the headphones:
Press and hold the Power Button until the LED Indicator flashes red. Speaker
will say:”Power off”.
Pairing:
- Start with Elibom turned off.
- Press and hold the power button until the LED Indicator flashesred red and blue alfernafely.
- Open your device’s Bluetooth settings and select “Elibom BC Lite. Speaker will say”Connected”.
Pick up the headphones, bring them behind the back of the base of your
neck,position the earhooks on your ears, then enjoy your music!
Wearing your headphones the wrong way could cause discomfort. The transducers
should rest in front of your ears.
Multifunction Button
- Play/pause music: Click once
- Power On/ Off: Long press
- Switch devices: Long press while during a call
- Answer call: Click once
- Decline the call: Long press while call coming
- End End call: Click once
Specifications
Mirco SD Card mode
ON Operate controls with headphones powered on.
- Double click on the multifunction button to switch between Bluetooth mode and Mirco SD card mode.
- Mirco SD card support up to 128GB of music storage. “Mirco SD card is not included.
Charging Tips
When the headphones are at low battery, there will be a “battery low” prompt and the red light will flash intermittently. Use the corresponding cable for charging.
The LED indicator will turn red during the charging process and the headphones will automatically turn off. The LED indicator will turn from red to blue when charging is complete.
Restore Factory Settings
OFF Operate controls with headphones powered off.
- Start with your headphones powered off.
- Press and hold multifunction button 8 seconds until Speaker will “Beep”and the LED indicator flashes red alternately.
Storage and Maintenance
- Store the headphones in a cool, dry place. The working temperature should be 0-45°C(32-113°F).Working in a cold/hot temperature, highly humid area, or low air pressure environment may reduce the battery life.
- Keep the product away from heat sources, direct sunlight, combustible gas or other liquids.
- Keeping the charging port dry before connecting to the charger will reduce the risk of damage.
- These headphones are water-resistant, but are not waterproof.
- Please do not submerse the headphones in water.
- Clean the headphones with a soft dry cloth.
- Do not charge right after exercising, in case there’s sweat inside the charging port, which could lead to circuit burning while charging.
- After storage for a long period, please charge the headphones before using again.
Note:
Design and specification are subject to change without notice. For the most
up-to-date product information, please contact
[email protected]
Packing list
If any part of your product is damaged or missing, do not use it.Contact authorized Elibom dealer or Elibom customer service.
Please note that the packaging envelope may vary depending on the sales
region.
Warning: Small parts not for children under 3years or any individuals who
have a tendency to inedible objects in their mouths.
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.