Yale 538 4-Digit Combination Padlock User Guide
- June 16, 2024
- Yale
Table of Contents
Yale 538 4-Digit Combination Padlock User Guide
Caution
Make sure to read and understand these instructions before attempting to
operate and change the combination of this lock.
Setting a new combination:
Step 1: Rotate each numbered wheel, so the “0” aligns with the indicator
line on the front of the lock. Fig 1.
Step 2: Hold the lock and pull up on the shackle. Fig 2.
Step 3 : With the shackle in the up position, rotate the shackle
“counterclockwise” towards you 180 degrees or half a turn. Ensure the reset
pin and slot are aligned. Fig 3.
Step 4: Push down on the shackle . Fig 4.
Step 5: You may now set a 4-digit combination of your choosing. On the
front of the lock, there are four numbered wheels. Rotate each wheel so that
your desired number lines up with the indicator.
Step 6: Hold the lock. Pull up on the shackle and rotate “clockwise” 180
degrees or one-half turn to the starting position. Fig 5.
Step 7: To lock, push the shackle down into the hole. Scramble number
wheels, so the new combination is no longer showing on the front of the lock
in-between indicator lines. Fig 6.
NOTICE
To change combination, start with step 1 again using your new combination.
Feedback and Help
Call: 1-855-213-5841
Email: support@yalelock.com
Visit: support.shopyalehome.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>