MARVEL iPad Portable Photo Booth Stand User Manual
- June 2, 2024
- Marvel
Table of Contents
MARVEL iPad Portable Photo Booth Stand
Attention
- Before using, please check whether cables are damaged or stuck.
- Don’t shake too much.
- Place on level ground.
- Assemble Fixed Plate well to prevent iPad gets damaged.
- Children must be accompanied by an adult.
- Please take off the foot cups when put the photo booth into the flight case for transportation.
Component Introduction
The attachments received are subject to 
lnstallation Guide
- Step 1: Open the Simple Flight Case
- Step 2: Connect the wire in the Body
- Step 3: Straighten the Body
- Step 4: Assemble the base using Allen wrench
- Step 5: Install Foot Cups
- Step 6: Insert cable through Ring Light Bracket and plug to Body
- Step 7:Fix Ring Light Bracket with a screwdriver
- Step 8: Remove the back plate on the Swivel Bracket and install it to Ring Light Bracket
- Step 9: Adjust the knob to control the tightness
- Step 1 O: Install the other part of the Swivel Bracket to the back of Panel
- Step 11: Fix your iPad on Panel with a Fixed Plate
- Step 12: Put on the back
- Step 13: Install Panel to Ring Light Bracket and screw it up
- Step 14: Install the screw
- Step 15: Plug the cable on Panel
- Step 16: Connect cables in upper Body
Functions of RF Controller
Light Control via Chacktok
- Download Chacktok from App Store/Google Play Store
- Register and select iPad Photo Booth Mode, After selecting photo template, you will get into the camera mode.
- Select Light Control at the top and connect to your Photo Booth. Light control function would be available.
Attention: Open Chacktok, go to ME-FREE VIP, Enter the code to get 2
months free VIP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>