ASRock NUC 1300-D5 BOX Series Mini PCs User Manual

: June 9, 2024
: ASRock

Table of Contents

Package Contents
Product Overview
How to Install the VESA Bracket
Positions of the NUC 1300/D5 BOX Series
Warranty Term
Safety & Regulatory Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASRock NUC 1300-D5 BOX Series Mini PCs

NUC 1300-D5 BOX Series Mini PCs

Package Contents

NUC 1300/D5 BOX Series
The barebone system does not include memory, hard drive and M.2 SSD.
- Power Cord (by request)
  19V/120W Power Adapter (i7 SKU)
  19V/90W Power Adapter (i5/i3 SKU
- M.2 Screw
  VESA Mount Bracket & Screw Package
- Bracket for M.2 2280 support
  Quick Installation Guide

Product Overview

*To use DisplayPort as a display output, please connect your monitor/display to HDMI Port when installing OS system. is DisplayPort only supports DP to HDMI dongle and DP to DVI dongle, and does not support DP to D-Sub dongle

A SO-DIMM Slots: How to Install the Memory Modules (DDR5)

Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
Push down until the modules snap into place.

Note:

The NUC 1300/D5 BOX Series requires DDR5 SO-DIMM.
For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR5 SO-DIMM pairs.

B WiFi Module: How to Install the WiFi Module (Optional)

Locate the WiFi Module slot on the motherboard.
Carefully insert the WiFi Module into the slot.
Tighten the screw to secure the WiFi Module to the motherboard.

C1 Bracket: How to Remove the M.2 SSD (Type 2280) and the Bracket

Release the screw and carefully remove the M.2 it into place. SSD (Type 2280)
Release the screw and remove the bracket from the motherboard.

C2 M.2 SSD: How to Install the M.2 SSD (Type 2260)

Locate the M.2 slot on the motherboard. Install the standoff.
Carefully insert the M.2 SSD into the slot.
Tighten the screw to secure the M.2 SSD to the motherboard.

D 2.5-inch Hard Drive: How to Install the Hard Drive

VIDEO TUTORIAL
Scan the QR code to watch the step-by-step video tutorial on how to install the hard disk drive on the NUC 1300/D5 BOX Series

Remove the four screws on the bottom case Then lift up and remove the bottom panel.
Attach the HDD to the hard drive mounting bracket and secure it using the four screws. Then connect the SATA Data and Power Cable to the HDD.
Attach the HDD assembly to the bottom panel and secure it using the four screws.
Connect the SATA Cable to the connector.
Then reinstall the bottom panel.

How to Install the VESA Bracket

Attach the two screws to the base of the NUC 1300/D5 BOX Series.
Attach the VESA Bracket to the rear of a compatible display using the four screws. *Choose mounting holes depending on the mounting hole pattern of your LCD screen (75 mm × 75 mm or 100 mm × 100 mm).
Mount the NUC 1300/D5 BOX Series by sliding it into place.

Positions of the NUC 1300/D5 BOX Series

The NUC 1300/D5 BOX Series can be placed in vertical or horizontal position.

Horizontal Position
Vertical Position
VESA-mounted

*Please note that keeping the NUC 1300/D5 BOX Series in a vertical position will ensure better cooling performance.

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Warranty Term

Warranty of host of NUC 1300/D5 BOX Series super m microcomputer (casing excluded): 1 year
Warranty of transformer (including the plug) and wireless module: 1 year
Our warranty does not cover the casing of the product, the CD drive, the metal frame and fastenings and screws, or packaging accessories.
Data stored in the product may be lost as a result of the repair work or re-formatting of the hard drive disk. We does not provide data recovery services or data storage. Please back up your data regularly to protect the data and avoid loss. For details of our warranty terms, please refer to the individual warranty statement applicable to the district where your product was bought.