NEXIGO 1551C Horizontal Stand and Cooling Fan User Manual

NEXIGO 1551C Horizontal Stand and Cooling Fan

Model No: NexiGo-P5 HOR STAND SET-1551C NEVW

Register to get EXTRA ONE year warranty. Only valid in registering within 14 days of product delivery. nexigo.com/warranty

Welcome to the NexiGo Family!

Thank you for choosing the NexiGo Horizontal Stand and Cooling Fan! You are now part of an exclusive club: the NexiGo family! Its our job to make sure you enjoy your membership. If you have any problems please contact us at cs@nexigo.com at any time for further assistance. This product is covered by our industry leading 1-year manufacturers warranty. Make sure to register your purchase at nexigo.com/warranty within 14 days of the delivery date to extend your warranty coverage to TWO Years!
From all of us here at NexiGo, we want to welcome you again to the family. We thank you deeply for your trust and for your business. We know you’ll love it here. We look forward to serving you again in the near future.
Yours Sincerely.
The NexiGo Team

Contact Information

• Website: www.nexigo.com
• Manufacturer: Nexight INC
• Email: cs@nexigo.com
• Tel +1(458) 215-6088
• Address: 11075 SW 11th St, Beaverton, OR 97005, US

Product Introduction

The NexiCo Horizontal Stand is designed to allow you to place your P-5 console in a horizontal position without damaging the side panels of the unit.
NOTE: It is not recommended to place other objects on top of the console while it is in a horizontal position.
The NexiGo Cooling Fan for the P-5 console is designed to reduce the operating temperature of the console, improving performance and prolonging the Console’s lifespan. It will automatically turn on/off with P-5 console. Powered by a USB port on the console, it does not require additional adapters or cables to supply power. Additionally. there is a USB passthrough port on the fan, so you don’t even have to give up a USB port for the device to function. While operating the fan will displaya blue LED light letting you know the unit is working. Compatible with both the Disc and Digital editions of the P-5 console.

Product Overview

Horizontal Stand

Cooling Fan

How to Attach the Horizontal Stand to the P-5 Console

P-5 Digital Edition:

1. Ensure the support stand is firmly inserted into the left stand.

2. Attach the left stand and right stand to the ends of the bottom plate (the one without the P-5 logo) as shown in the following picture.
   

3. When complete it should look like the image below.
   

P-5 Disc Edition:

1. Please remove the support stand from the left stand as shown below.
   

2. Attach the left stand and right stand to the ends of the bottom plate (the side with the disc drive) as shown in the following picture.
   

3. When complete it should look like the image below.
   

How to Attach the Cooling Fan to the P-5 Console

1. Slide the hooks at the top of the fan into the uppermost slots in the back grill of the P-5 console.
2. Insert the USB fan power connector into the upper USB port (it will be positioned right over the correct port) at the back of the P-5 console
3. The fan is now ready to use.

Notes

• Do not block or impede airflow to this cooling fan. Ensure the console has a reasonable amount of clearance on all sides so airflow is not obstructed.
• Do not stick fingers or other objects into any of the openings on this cooling fan. You may damage the unit or injure yourself.
• Please use a clean dry cloth to clean the products. Do not clean the products with water, alcohol, or other cleaning agents. When cleaning the cooling fan, please unplug it first.
• The products can not be used and/or stored in high humidity conditions.
• If the products are damaged, please exercise the warranty or dispose of the items. Do not attempt to open and repair them independently.
• To ensure the longevity and lifespan of the stand protect it from dust and do not stack heavy objects on it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>