vtech BC8314 V-Hush Pro 2 Sleep Training Soother User Guide

: June 9, 2024
: vtech

Table of Contents

vtech BC8314 V-Hush Pro 2 Sleep Training Soother
Technical specifications
What’s in the box
Important safety instructions
Connect and power on the soother
Before use
Download the app
App Features
Overview
Use the soother
FCC and IC regulations
Limited warranty
Disclaimer and Limitation of Liability
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

vtech BC8314 V-Hush Pro 2 Sleep Training Soother

Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news.

For more support information

Technical specifications

Frequency 2402 – 2480 MHz
Channels 79
Nominal effective range Maximum power allowed by FCC and IC. The actual operating range may vary according to environmental conditions at the time of use.
Power requirements Soother power adapter: Input: 100-240V~50/60Hz 0.5A; Output: 5V DC 1A

What’s in the box

vtech-BC8314-V-Hush-Pro-2-Sleep-Training-Soother-FIG-1

Important safety instructions

The applied nameplate is located at the bottom of the soother’s base. When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury, including the following:

Follow all warnings and instructions marked on the product.
Adult setup is required.
This product is not a substitute for adult supervision of the infant. Supervising the infant is the parent’s or caregiver’s responsibility. This product could cease operating, and therefore you should not assume it will continue working properly for any given period of time. Further, this is not a medical device and should not be used as such.
Do not use this product near water. For example, do not use it next to a bathtub, wash bowl, kitchen sink, laundry tub, or swimming pool, or in a wet basement or shower.
Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product.
Power adapter information:
- Input: 100-240V~50/60Hz 0.5A
- Output: 5V DC 1A VTech Telecommunications Ltd.
  Model: VT05EUS05100
The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
For pluggable equipment, the socket outlet shall be installed near the equipment and shall be easily accessible.
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation.
Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company.
Do not overload wall outlets or use an extension cord.
Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa, or rug. This product should never be placed near or over a radiator or heat register.
Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.
To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
Periodically examine all components for damage.
There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the soother periodically by powering off and then powering on the unit, and power off the soother if you will not use it for some time.
Children should be supervised to ensure that they do not play with the product.
The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

Use and store the product at a temperature between 32oF and 104oF.
Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.
Warning—Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9m) away). Do not remove this tag.
Never place the soother inside the baby’s crib or playpen. Never cover the soother with anything such as a towel or a blanket.
Other electronic products may cause interference with your soother. Try installing your soother as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones.
Do not allow your child or anyone to look directly into the projector lens while it is turned on to avoid possible eye damage.

Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

Should keep wireless devices at least six inches from the pacemaker.
Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.

Electromagnetic fields (EMF)
This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available today.

Connect and power on the soother

NOTE

Only use the power adapter supplied with this product.
If the soother is connected to a switch-controlled electric outlet, make sure the switch is on.
Connect the power adapter in a vertical or floor mount position only. The adapter prongs are not designed to hold the weight of the soother, so do not connect it to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapter may not properly connect to the outlet.
Make sure the soother and the power adapter cord are out of reach of children.

Connect the power adapter to the soother and a power supply, then the soother powers on automatically. vtech-BC8314-V-Hush-Pro-2-Sleep-Training-Soother-
FIG-2

Before use

Positioning the soother

Place the soother more than 3 feet (1 meter) away from your baby.

Caution

Keep the soother out of the reach of your baby. Never place the soother inside the baby’s crib or playpen.

NOTE

To avoid interference from other electronic devices, place your soother at least 3 feet (1m) away from devices such as wireless routers, microwaves, cell phones and computers.

Download the app

Download MyVTech Soother App for more premium features

Download MyVTech Soother App to your mobile device from Apple Store or Google Play store to gain full access of features and conveniently control your soother. Put advanced functions to action, like customizing a routine, with just a few taps of the finger. With MyVTech Soother App, you can pamper your baby.

TIP

Make sure your mobile device meets the minimum requirement for the mobile app.

NOTE
The mobile app is compatible with:

AndroidTM 6.0 or later; and
iOS 12 or later.

Step 1
Install MyVTech Soother App

Browse the App Store or the Google Play store .
Search for the mobile app with the keyword “MyVTech Soother“.
Download and install the MyVTech Soother App on your mobile device.
-OR-
Scan the QR code below to install the app.
Step 2
Connect both devices via Bluetooth
Follow the instructions in the mobile app to set up and pair your soother.
Tap the app icon to run the mobile app in your mobile device, and set your mobile device to Bluetooth discoverable mode.
Soother will start searching nearby devices automatically after being powered on.
Select MyVTech Soother under the list of available devices and wait for a while for the pairing process.

NOTE

```
* Make sure your soother is powered on before pairing.
```
- Place your mobile phone near the soother for a better connection.

App Features

vtech-BC8314-V-Hush-Pro-2-Sleep-Training-Soother-FIG-7

Overview

vtech-BC8314-V-Hush-Pro-2-Sleep-Training-Soother-FIG-8

Night light
Digital display
+ VOLUME
Press to increase the soother speaker volume.
Play/Stop
Press to play the lullaby-like audio and press again to stop playing.
Film projection On/Off key Bluetooth pairing key
- Press and hold for 5 seconds to enter the Bluetooth pairing mode.
– VOLUME
- Press to lower the soother speaker volume
Audio key
- Press and hold to change among 4 different modes including soothing sound, lullaby, classical music and storytelling.
- Skip
- Press to skip to the next piece.
On/Off switch
- Press to turn on or turn off the soother.
- Timer
- Press to select the time interval options and release to start the countdown.
power jack
Film projector
Magic Key
Temperature sensor
RESET key

Use the soother

Film Projection
The projection light is located on the top of the soother and offers you 6 types of projection film to choose from for your little baby. The selected pattern will be projected onto the ceiling at a tilted angle.

Turn on or turn off the projection

Press the Film projection On/Off key to turn on or turn off the projection.

Adjust the projection angle

Tilt the projection light lens manually to try out different angles then pick the one which suits your baby the best.
Adjust your soother’s position with the projection light to help soothe your baby to sleep. For optimal performance, place the soother in an upright position.

Magic Key
Several functions can be performed using the Magic key located on the top of the soother.

Start or stop the soother

When inactive, tap the Magic key to start and resume the Soother to its previous settings.
When active, tap the Magic key to stop the soother.

Change your favorite mode

Tap the Magic key twice to go to the next favorite mode.

Adjust the night light brightness
With the night light, the soother can illuminate a soft hue to calm your baby in a dark room. You can control the brightness level of its glow directly on the soother and adjust the night light color remotely in MyVTech Soother App.

Tap and hold the Magic key to adjust the night light’s brightness level.

Audio Player
An array of lullaby-like audio content comes in handy, including stories, classical music, soothing sound as well as lullabies. All audio contents are pre-stored in the soother.
Play or stop the audio

Press to play sounds, music or stories and press again to stop playing.

Change the audio mode

Press and hold to change among 4 different modes following the below sequence.
Soothing sound
Lullaby
Classical music
Storytelling

Skip an audio

Press to skip the current song and play the next one.

Adjust the volume

Press + or – to increase or decrease the volume.

Caution

Beware of the speaker volume. For ear protection, the maximum volume is set to Level 6 by default (Level 1 – the lowest to Level 10 – the highest). If you want to set the volume level higher than Level 6, you can adjust it in MyVTech Soother App.

NOTE
When an audio is playing, two letters before the colon will be shown on the digital display. It represents the audio mode you are currently in and the track currently playing.

stands for Lullaby mode.
stands for Classical music mode.
stands for Storytelling mode.
stands for Soothing sound mode.

Auto-off Timer

While the soother is playing the story, lullaby, classical music, or soothing sound, the auto-off timer feature helps you automatically stop the projection, light, and sound after playing for 30/60/120/180, or 240 minutes.

Set auto-off timer

Toggle to select timer options OFF, 30 minutes, 60 minutes, 120 minutes, 180 minutes or 240 minutes.
Stop pressing to start the countdown.
Toggle back to OFF to stop the countdown.

Temperature and Time
Once the soother is turned on, it detects the room temperature automatically. The measurement is shown on the digital display alternately with the clock. The time of the clock will be in sync with your mobile device after pairing.

TIP
Making adjustments to the following items is available in MyVTech Soother App.

Temperature format
12-hour or 24-hour time format
Temperature and time rotation interval12

Audio streaming from your mobile device

The soother is able to function as a Bluetooth speaker after pairing with a mobile device via Bluetooth so you can play your own music from your mobile device through the soother.

Connect your device with the soother via Bluetooth audio
To use a Bluetooth-enabled mobile device with your soother, you must first pair and connect your Bluetooth mobile device with the soother. Before you begin, make sure that your Bluetooth-enabled mobile device is not connected to any other Bluetooth device.

On the soother

Press and hold the Bluetooth pairing key for 5 seconds to enter Bluetooth pairing mode.

On your device

Set your mobile device to discoverable mode before pairing.
Place your mobile device next to the soother during the whole pairing process.
Select “V-Hush™ Pro 2” under the device list.

NOTE

After the soother enters the Bluetooth pairing mode, the word BLUE will keep flashing on the digital display.

Need help?

For more guides to help you operate your soother, check out the latest online help topics and FAQs by going to
https://help.vtechphones.com/bc8314
Alternatively, you can scan the QR code on the right.
You can also call our Customer Support at 1 800-595-9511 [in the US] or 1 800-267-7377 [in Canada] for help.

FCC and IC regulations

FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To ensure the safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The soother shall be installed and used such that parts of all persons’ bodies are maintained at a distance of approximately 8 in (20 cm) or more. This Class B digital apparatus complies with Canadian requirements: CAN ICES-3 (B)/NMB-3(B)

Industry Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Innovation, Science, and Economic Development Canada technical specifications.

RF radiation exposure statement
The soother complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The soother should be installed and operated with a minimum distance of 8 in (20 cm) between the soother and all persons’ bodies. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This equipment complies also with Industry Canada RSS-102 with respect to Canada’s Health Code 6 for Exposure of Humans to RF Fields.

Limited warranty

What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.

What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)?
During the limited warranty period, VTech’s authorized service representative will replace at VTech’s option, without charge, a Materially Defective Product. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the replacement Products to you in working condition. You should expect the replacement to take approximately 30 days.

How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase (90 days on products purchased as Refurbished). This limited warranty also applies to the replacement Product for a period of either (a) 90 days from the date the replacement Product is shipped to you or (b) the time remaining on the original one-year warranty (90-day limited warranty on products that are purchased as Refurbished); whichever is longer.

Refurbished products purchased from our online store carry a 90-day replacement warranty.

What is not covered by this limited warranty?
This limited warranty does not cover:

The product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or another liquid intrusion; or
The product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or
Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or
Product to the extent that the problem is caused by use with non-VTech accessories; or
A product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or
Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or
Product returned without a valid proof of purchase (see item 2 below); or
Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.

How do you get warranty service?
To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 800-595-9511. In Canada, go to www.vtechcanada.com or call 1 800-267-7377.

NOTE: Before calling for service, please review the user’s manual – a check of the Product’s controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit.

What must you return with the Product to get warranty service?

Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and
Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and
Provide your name, complete and correct mailing address, and telephone number.

Other limitations
This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province.

Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Please retain your original sales receipt as proof of purchase.

Disclaimer and Limitation of Liability

VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this user’s manual. VTech Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product. Company: VTech Communications, Inc. Address: 9020 SW Washington Square Road – Ste 555 Tigard, OR 97223, United States Phone: 1 800-595-9511 in the U.S. or 1 800-267-7377 in Canada