CE LINK WPC15-1MWNAS Wireless Charger User Manual
- June 9, 2024
- CE-LINK
Table of Contents
Wireless Charger
WPC15-1MWNAS
User Manual
WPC15-1MWNAS Wireless Charger
Wireless Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or using
this product. Please keep this manual for future reference.
INTRODUCTION
This product is a high-performance wireless charger. This product is suitable for mobile phones, MP3, MP4, digital productions, and other productions based on wireless charging 5W or 10W or 15W. Connect the wireless to a power charger, and then you can charge your device supported wireless charging (MP3, mobile phones, etc) by put it on the charger directly. It is helpful in long time journey and convenient for business!
FEATURES
- Transmitting terminal input: 5V/2A, 9V/1.67A ,12V/1.5A
- Transmitting terminal output: 5W/7.5W/10W/15W
- Intelligent green indicator to show working condition
- Compliant with QI, CE, FCC standards
- It is light, smart and convenient to use
SPECIFICATIONS
Input | Micro-USB: 5V/2A, 9V/1.67A,12V/1.5A |
---|---|
Output | 10W Max |
Switch Frequency | 110K-205K |
Operating Temperature Range | 0-35°C |
Storage Temperature Range | -20 — 70°C |
Operation Humidity | 10% ” 80% RH |
Storage Humidity | 5% — 95% RH |
Size | 100.33*8mm |
Weight | 145g |
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit×1
- User Manual×1
OPERATION
Operation Procedures
- Connect the wireless charger with a power adapter, and then the light will blink green one time,then light off
- Put your device (supported wireless charging) on the charger, the green light will breathing .
- When finished charging, the light will light on
- Please remove your device after fully charged.
Note: When accident occurs, the light flashes green.
Operation Notes
- For optimum performance, please use the wireless charger according to this user manual.
- Please connect the wireless charger to a power adapter which output should be 5V/2A, 9V/1.67A,12V/1.5A
- Please unplug the wireless charger after using.
- Do not use the wireless charger with an electronic product which is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
- It’s normal that wireless charger will be a little overheated in the use process.
- When the wireless charger stops working under some accidents , you need to check whether the device is compatible with this charger.
- Do not let the wireless charger close to fire, such as stove, candles and etc.
- Do not let the wireless charger soak into liquid, such as swimming pool, bathtub, etc.
- Do not wash the wireless charger with corrosive cleaner.
- If the wireless charger cannot work properly, please contact the store or distributor in your area.
CONNECTION DIAGRAM
FCC Warning
This device complies with Part 18 of the FCC Rules.
NOTE: Any changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
(a) Max. Electric Field Emissions: 1.3623V/m
Max. Magnetic Field Emissions: 0.3872A/m
(b) The maintenance of the system is the responsibility of the manufacturer.
(c) To prevent interference, the product should be as far away from devices
operating at the same frequency as possible.
RF exposure considerations
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>