DAVIS LIGHTING UTOFIA-UFX High Bay Instruction Manual
- June 9, 2024
- DAVIS LIGHTING
Table of Contents
DAVIS LIGHTING UTOFIA-UFX High Bay
This installation guide is valid for the following models:
- Utofia – UFX
PRIOR TO INSTALLATION
- Read all instructions to prevent injury, electric shock or damage due to fire or mechanical hazards
- See product label for supply specifications
Inspect the luminaire and associated parts for any signs of defect, in particular fasteners, cables and the diffuser or glass lens DO NOT INSTALL THE LUMINAIRE IF IT APPEARS IN ANY WAY FAULTY Consult with the supplier / sales office for details regarding replacement
CAUTION
- Before commencing installation, turn off and isolate the electrical supply
- Electronic control equipment must not be subjected to high voltages. DO NOT MEGGER between Live and Neutral
- All cable / conduit terminations must be installed in accordance with the designated IP rating of this product
- Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when subjected to vibration and / or movement
- This luminaire must be installed by qualified electrician in accordance with local rules and codes
- This luminaire cannot be disassembled by non-professional persons
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- Prior to installation, products are to be stored in cool dry conditions
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- Terminal block used must comply to IEC60998-1, IEC60998-2-1, Screw type, 3 poles, 450v, T110, 6mm².
- Luminaire is only to be installed outside arm’s reach.
INSTALLATION
- Turn OFF the main supply
- Hang the luminaire on the hook (Optional 1)
- Install at least 2 bolts on the ceiling (Optional 2)
- Install the trunnion arm of luminaire to the bolts
- Tighten the trunnion arm with nuts
- Adjust desired angle by loosening the trunnion arm screws located at both sides
- Turn ON the main supply
- Turn ON the main supply
DIMENSIONS
MAINTENANCE
The supply must be isolated before opening or accessing the luminaire. Product maintenance is critical to the products designed performance. Davis Lighting is not responsible for any product not maintained in accordance with the recommended procedure or intervals. It is recommended that a bi-annual cleaning cycle is implemented. Inspect optical surfaces for damage or crack. Products supplied with visors or covers must not be operate with a damaged visor or cover; it is recommended damaged visors or covers be replaced by a competent person immediately. Seals and electrical components such as wirings to be checked for deterioration.
All photometric and electrical data published are of ±10% tolerance. Characteristics and specifications may change without notice. All electrical installations / connections should be carried out by a suitably qualified person. Application images are indicative only and may not contain actual Davis product. The information contained in this publication is typical and must not be interpreted as a guarantee of individual product performance. This product may contain substances that can be hazardous to the environment if not disposed of correctly. Electrical and electronic equipment should never be discarded along with general waste but should be separated for correct treatment and recovery. Packaging and waste materials should be recycled wherever possible.
CONTACT
Australia Head Office & Sales Davex Australia Pty Ltd
Head Office: +61 (7) 3712 8988 Sales Offices: 1300 851 001 Fax: +61 (7) 3272
8988
Email: [email protected]
Malaysia Head Office & Sales
Davex Malaysia Sdn Bhd (114942-X) Phone: +60 (3) 5636 4348
Fax: +60 (3) 5636 4352
Email: [email protected]
Singapore Head Office & Sales
Davex Singapore Pte Ltd
Phone: +65 6745 2511
Fax: +65 6745 5828
Email: [email protected]