DAVIS LIGHTING BUED10 Bathurst BUED Wall Light Instruction Manual
- June 6, 2024
- DAVIS LIGHTING
Table of Contents
BATHURST – BUED
Wall light
211112
Installation
Instructions
This installation guide is valid for the following models:
- Bathurst – BUED
PRIOR TO INSTALLATION
| • Read all instructions to prevent injury, electric shock or damage due to
fire or mechanical hazards
• See product label for supply specifications|
---|---|---
Inspect the luminaire and associated parts for any signs of defect, in
particular fasteners, cables and the diffuser or glass lens
DO NOT INSTALL THE LUMINAIRE IF IT APPEARS IN ANY WAY FAULTY
Consult with the supplier/sales office for details regarding replacement
CAUTION
- Before commencing installation, turn off and isolate the electrical supply
- Electronic control equipment must not be subjected to high voltages. DO NOT MEGGER between Live and Neutral
- All cable/conduit terminations must be installed in accordance with the designated IP rating of this product
- Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when subjected to vibration and/or movement
- This luminaire must be installed by a qualified electrician in accordance with local rules and codes
- This luminaire cannot be disassembled by non-professional persons
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
- Prior to installation, products are to be stored in cool dry conditions
INSTALLATION
-
Turn OFF the main supply
-
Separate mounting bracket from body
-
Use mounting bracket as a guide, prepare wall plug, then mount the bracket
-
Connect mains cable to the terminal block
-
Install luminaire back to the bracket
-
Turn ON the main supply
-
The wall light will lighten up
Unauthorized modification & improper installation void product warranty.
DIMENSIONS
BUED
| Model | Dimension (W x L x H) |
|---|---|
| BUED10 | 120 x 96.8 x 100 |
| BUED20 | 242 x 97.7 x 100 |
MAINTENANCE
The supply must be isolated before opening or accessing the luminaire. Product maintenance is critical to the product’s designed performance. Davis Lighting is not responsible for any product not maintained in accordance with the recommended procedure or intervals. It is recommended that a bi-annual cleaning cycle is implemented. Inspect optical surfaces for damage or crack. Products supplied with visors or covers must not be operated with a damaged visor or cover; it is recommended damaged visors or covers be replaced by a competent person immediately. Seals and electrical components such as wirings to be checked for deterioration.
All photometric and electrical data published are of ±10% tolerance.
Characteristics and specifications may change without notice. All electrical
installations/connections should be carried out by a suitably qualified
person. Application images are indicative only and may not contain actual
Davis products. The information contained in this publication is
typical and must not be interpreted as a guarantee of individual product
performance.
This product may contain substances that can be hazardous to the environment
if not disposed of correctly. Electrical and electronic equipment should never
be discarded along
with general waste but should be separated for correct treatment and recovery.
Packaging and waste materials should be recycled wherever possible.
CONTACT
Australia Head Office & Sales
Davex Australia Pty Ltd
Head Office: +61 (7) 3712 8988
Sales Offices: 1300 851 001
Fax: +61 (7) 3272 8988
Email: [email protected]|
Malaysia Head Office & Sales
Davex Malaysia Sdn Bhd (114942-X)
Phone: +60 (3) 5636 4348
Fax: +60 (3) 5636 4352
Email: [email protected]|
Singapore Head Office & Sales
Davex Singapore Pte Ltd
Phone: +65 6745 2511
Fax: +65 6745 5828
Email: [email protected]
---|---|---
davislighting.com/www.davislighting.com.au