DAVIS LIGHTING Bola-BAG Bollard Instruction Manual
- June 6, 2024
- DAVIS LIGHTING
Table of Contents
BOLA Bollard
220107
Installation Instructions
This installation guide is valid for the following models:
- Bola - BAC BAA BAG
PRIOR TO INSTALLATION
- Read all instructions to prevent injury, electric shock, or damage due to fire or mechanical hazards
- See product label for supply specifications
- Suitable for recessed or suspension mounting
PRIOR TO INSTALLATION
- Read all instructions to prevent injury, electric shock, or damage due to fire or mechanical hazards
- See product label for supply specifications
- Suitable for recessed or suspension mounting
Inspect the luminaire and associated parts for any signs of defect, in
particular fasteners, cables, and the diffuser or glass lens
DO NOT INSTALL THE LUMINAIRE IF IT APPEARS IN ANY WAY FAULTY
Consult with the supplier/sales office for details regarding replacement
CAUTION
- Before commencing installation, turn off and isolate the electrical supply
- Electronic control equipment must not be subjected to high voltages. DO NOT MEGGER between Live and Neutral
- All cable/conduit terminations must be installed in accordance with the designated IP rating of this product
- Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when subjected to vibration and/or movement
- This luminaire must be installed by qualified electrician in accordance with local rules and codes
- This luminaire cannot be disassembled by non-professional persons
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
- Prior to installation, products are to be stored in cool dry conditions
INSTALLATION
-
Install L bolts to fixing plate.
-
Prepare the base & plant fixing plate.
-
Install base plate to the fixing plate & tighten it.
-
Install top head into the body & tighten with screws.
**Step only applies to BAC -
Connect mains cables with IP65 connector (not supplied).
-
Install bollard to the base plate & tighten with screws.
WIRING
Dimmable
Warning! Do not wire dim cord to high voltage or dim function will fail.
DIMENSIONS
BAC
| Model | Dimensions (ø x H) |
|---|---|
| BACS1230 | Ø100×300 |
| BACS1260 | Ø100×600 |
| BACS1290 | Ø100×900 |
| BACS2530 | Ø100×300 |
| BACS2560 | Ø100×600 |
| BACS2590 | Ø100×900 |
| BAC1230 | Ø170×300 |
| BAC1260 | Ø170×600 |
| BAC1290 | Ø170×900 |
| BAC2530 | Ø170×300 |
| BAC2560 | Ø170×600 |
| BAC2590 | Ø170×900 |
BAA
| Model | Dimensions (ø x H) |
|---|---|
| BAAS1230 | Ø100×300 |
| BAAS1260 | Ø100×600 |
| BAAS1290 | Ø100×900 |
| BAAS2530 | Ø100×300 |
| BAAS2560 | Ø100×600 |
| BAAS2590 | Ø100×900 |
| BAA1230 | Ø170×300 |
| BAA1260 | Ø170×600 |
| BAA1290 | Ø170×900 |
| BAA2530 | Ø170×300 |
| BAA2560 | Ø170×600 |
| BAA2590 | Ø170×900 |
BAG
| Model | Dimensions (ø x H) |
|---|---|
| BAG1030 | Ø100×300 |
| BAG1060 | Ø100×600 |
| BAG1090 | Ø100×900 |
| BAG2030 | Ø100×300 |
| BAG2060 | Ø100×600 |
| BAG2090 | Ø100×900 |
MAINTENANCE
The supply must be isolated before opening or accessing the luminaire. Product maintenance is critical to the products designed performance. Davis Lighting is not responsible for any product not maintained in accordance with the recommended procedure or intervals. It is recommended that a biannual cleaning cycle is implemented. Inspect optical surfaces for damage or crack. Products supplied with visors or covers must not be operated with a damaged visor or cover; it is recommended damaged visors or covers be replaced by a competent person immediately. Seals and electrical components such as wirings to be checked for deterioration.
All photometric and electrical data published are of ±10% tolerance.
Characteristics and specifications may change without notice. All electrical
installations/connections should be carried out by a suitably qualified
person. Application images are indicative only and may not contain actual
Davis product. The information contained in this publication is typical and
must not be interpreted as a guarantee of individual product performance.
This product may contain substances that can be hazardous to the environment
if not disposed of correctly. Electrical and electronic equipment should never
be discarded along with general waste but should be separated for correct
treatment and recovery. Packaging and waste materials should be recycled
wherever possible.
CONTACT
Australia Head Office & Sales
Davex Australia Pty Ltd Head Office: +61 (7) 3712 8988 Sales Offices: 1300 851
001
Fax: +61 (7) 3272 8988
Email: australia@davislighting.com
Malaysia Head Office & Sales
Davex Malaysia Sdn Bhd (114942-X) Phone: +60 (3) 5636 4348
Fax: +60 (3) 5636 4352
Email: malaysia@davislighting.com
Singapore Head Office & Sales
Davex Singapore Pte Ltd
Phone: +65 6745 2511
Fax: +65 6745 5828
Email: singapore@davislighting.com
davislighting.com /
www.davislighting.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>