Davis Lighting Sirius SRE2 LED Emergency Light Installation Guide

Sirius SRE2
LED Emergency Light

This installation guide is valid for the following models: SRE2LI (C0 / C90: D32)

PRIOR TO INSTALLATION

• Read all instructions to prevent injury, electric shock or damage due to fire or mechanical hazards
• See product label for supply specifications
• Suitable for recessed mounting, or surface mounting when used in conjunction with the optional weatherproof box (ordered separately)

Open the carton and check that it contains the following:
1 x Sirius SRE LED emergency light
1 x Installation instructions (this document)

Inspect the luminaire and associated parts for any signs of defect, in particular fasteners, cables and the diffuser or glass lens
DO NOT INSTALL THE LUMINAIRE IF IT APPEARS IN ANY WAY FAULTY
Consult with the supplier / sales office for details regarding replacement

CAUTION

• Before commencing installation or maintenance, turn off and isolate the electrical supply
• Electronic control equipment must not be subjected to high voltages. DO NOT MEGGER between Live and Neutral
• All cable / conduit terminations must be installed in accordance with the designated IP rating of this product
• Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when subjected to vibration and / or movement
• This luminaire must be installed by qualified electrician in accordance with local rules and codes
• This luminaire cannot be disassembled by non-professional persons
• The light source and battery of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
• Prior to installation, products are to be stored in cool dry conditions

LUMINAIRE INSTALLATION

1. Prepare ceiling cutout:
   Ø76mm without trim
   Ø76 – 135mm with trim

2. Feed the driver through the ceiling cutout and connect to mains supply
   

3. Bend back the spring clips and insert the luminaire into the ceiling cutout
   

4. Reconnect the mains supply and check that the charge indicator is illuminated

EMERGENCY CLASSIFICATION

WEATHERPROOF BOX INSTALLATION

1. Remove screws and disassemble the mounting box. Knock out desired cable entry and fit IP gland
   

2. Mark and drill fixing positions on the mounting surface

3. Attach mounting box to the mounting surface using the screws provided

4. Feed supply cable through IP gland.
   Attach driver to the mounting box

5. Connect the mains supply and the driver to the terminal block provided

6. Feed the driver cable through the cutout plate and attach the cutout plate to the mounting box

7. Attach driver cable to the luminaire. Bend back the spring clips and insert the luminaire into the cutout plate

8. Replace mounting box cover and reconnect the mains supply, ensuring the charge indicator is illuminated

Unauthorized modification & improper installation void product warranty.

DIMENSIONS

OPERATION & TESTING

Test Procedure:
Ensure the supply is connected and the battery is fully charged
Press and hold the test switch
The LED indicator will extinguish and the luminaire will go into emergency mode
Release the switch to return to normal operating mode

MAINTENANCE

The supply must be isolated before opening or accessing the luminaire. Product maintenance is critical to the products designed performance. Davis Lighting is not  responsible for any product not maintained in accordance with the recommended procedure or intervals. It is recommended that a bi-annual cleaning cycle is implemented.  Inspect optical surfaces for damage or cracks.
Products supplied with visors or covers must not be operated with a damaged visor or cover; it is recommended damaged visors or covers be replaced by a competent person immediately. Seals and electrical components such as wiring should be checked for deterioration.

All photometric and electrical data published are of ±10% tolerance. Characteristics and specifications may change without notice. All electrical installations / connections  should be carried out by a suitably qualified person. Application images are indicative only and may not contain actual Davis product. The information contained in this  publication is typical and must not be interpreted as a guarantee of individual product performance.

https://qrs.ly/fmcqsin

This product may contain substances that can be hazardous to the environment if not disposed of correctly. Electrical and electronic equipment should never be discarded  along with general waste but should be separated for correct treatment and recovery. Packaging and waste materials should be recycled wherever possible.

Australia Head Office & Sales
Davex Australia Pty Ltd
Head Office: +61 (7) 3712 8988
Sales Offices: 1300 851 001
Fax: +61 (7) 3272 8988
Email: australia@davislighting.com
Web: www.davislighting.com.au

References

• Davis Lighting Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>