ViewSonic STND-065 Stand Installation Guide
- July 22, 2024
- Viewsonic
Table of Contents
ViewSonic STND-065 Stand
Preparation
Ensure you have a screwdriver ready. Do not attempt to assemble the stand while the TV is lying flat on a hard surface, as this could cause damage. Instead, place the TV on a soft surface or have someone assist you in holding it upright.
- A screwdriver.
- Incorrect method – person assembling the stand with the TV lying flat on a hard surface.
- Correct method – person assembling the stand with the TV on a soft surface or with assistance.
Components
Identify the components required for the assembly:
- a: Left stand leg labeled “L”.
- b: Right stand leg labeled “R”.
- c: Six screws for attaching the stand legs to the TV.
| Component | Description |
|---|---|
| a | Left stand leg labeled “L”. |
| b | Right stand leg labeled “R”. |
| c | Six screws for attaching the stand legs to the TV. |
Installation
Follow these steps to install the stand:
- Place the TV on a soft surface or have someone assist you in holding it upright.
- Attach the left stand leg (labeled “L”) to the left side of the TV using three screws.
- Attach the right stand leg (labeled “R”) to the right side of the TV using three screws.
Ensure all screws are tightened securely to avoid any instability.
Image:
TV with stand legs attached and screws being tightened.
Additional Information
For more information, you can scan the QR codes below:
- QR Code for STND-065
- QR Code for Support Center
- QR Code for ViewSonic website: www.viewsonic.com.
Specifications
| Item | Specification |
|---|---|
| Model | STND-065 |
| Compatible TV | CDE6512 |
FAQ
-
Q: What tools do I need to assemble the stand?
A: You will need a screwdriver. -
Q: Can I assemble the stand by myself?
A: It is recommended to have someone assist you or place the TV on a soft surface to avoid damage. -
Q: Where can I find more information or support?
A: You can scan the QR codes provided in the guide or visit www.viewsonic.com.
Copyright © 2024 ViewSonic Corporation. All rights reserved.