DAVIS LIGHTING CLDR Ceiling Light Instruction Manual

June 3, 2024
DAVIS LIGHTING

CLDR Ceiling Light
Instruction Manual
DAVIS LIGHTING CLDR Ceiling Light

This installation guide is valid for the following models:

  • Clio – CLDR

PRIOR TO INSTALLATION

| • Read all instructions to prevent injury, electric shock or damage due to fire or mechanical hazards
• See product label for supply specifications| MUST BE INSTALLED
BYA LICENSED ELECTRICIAN
---|---|---

Inspect the luminaire and associated parts for any signs of defect, in particular fasteners, cables and the diffuser or glass lens
DO NOT INSTALL THE LUMINAIRE IF IT APPEARS IN ANY WAY FAULTY
Consult with the supplier / sales office for details regarding replacement
This installation guide is valid for the following models:

CAUTION

  • Before commencing installation, turn off and isolate the electrical supply
  • Electronic control equipment must not be subjected to high voltages. DO NOT MEGGER between Live and Neutral
  • All cable / conduit terminations must be installed in accordance with the designated IP rating of this product
  • Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when subjected to vibration and / or movement
  • This luminaire must be installed by qualified electrician in accordance with local rules and codes
  • This luminaire cannot be disassembled by non-professional persons
  • The light source of this luminaire is non-user replaceable. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person
  • Prior to installation, products are to be stored in cool dry conditions

INSTALLATION

  1. Turn OFF the main supplyDAVIS LIGHTING CLDR Ceiling Light - Figure 1
  2. Unlock the cover in anti-clockwise direction and remove it completely
  3. Drill holes on the wallDAVIS LIGHTING CLDR Ceiling Light - Figure 3
  4. Insert plastic wall plugsDAVIS LIGHTING CLDR Ceiling Light - Figure 4
  5. Fix the base on the ceiling with atleast 3 screwsDAVIS LIGHTING CLDR Ceiling Light - Figure 5
  6. Connect mains to the terminal blockDAVIS LIGHTING CLDR Ceiling Light - Figure 6
  7. Install back the terminal block cap and select the needed CCTDAVIS LIGHTING CLDR Ceiling Light - Figure 7
  8. Install the lumiaire cover and tighten in clockwise directionDAVIS LIGHTING CLDR Ceiling Light - Figure 8
  9. Turn ON the main supplyDAVIS LIGHTING CLDR Ceiling Light - Figure 9

Unauthorized modification & improper installation void product warranty.

DIMENSIONS

DAVIS LIGHTING CLDR Ceiling Light - Figure 10

Model Height x Ø (mm)
CLDR12CT 89 x 259
CLDR18CT 99 x 330
CLDR28CT 106 x 386

DAVIS LIGHTING CLDR Ceiling Light - Figure 11

Model Height x Ø (mm)
CLDR12CT 75 x 249
CLDR18CT 85 x 335
CLDR28CT 85 x 396

MAINTENANCE

The supply must be isolated before opening or accessing the luminaire. Product maintenance is critical to the products designed performance. Davis Lighting is not responsible for any product not maintained in accordance with the recommended procedure or intervals. It is recommended that a bi-annual cleaning cycle is implemented. Inspect optical surfaces for damage or crack. Productssupplied with visors or covers must not be operate with a damaged visor or cover; it is recommended damaged visors or covers be replaced by a competent person immediately. Seals and electrical components such as wirings to be checked for deterioration.

All photometric and electrical data published are of ±10% tolerance. Characteristics and specifications may change without notice. All electrical installations/connections should be carried out by a suitably qualified person. Application images are indicative only and may not contain actual Davis product. The information contained in this publication is typical and must not be interpreted as a guarantee of individual product performance.
This product may contain substances that can be hazardous to the environment if not disposed of correctly. Electrical and electronic equipment should never be discarded along with general waste but should be separated for correct treatment and recovery. Packaging and waste materials should be recycled wherever possible

CONTACT

Australia Head Office & Sales
Davex Australia Pty Ltd
Head Office: +61 (7) 3712 8988
Sales Offices: 1300 851 001
F a x: +61 (7) 3272 8988
Email: australia@davislighting.com| Malaysia Head Office & Sales
Davex Malaysia Sdn Bhd (114942-X)
Phone: +60 (3) 5636 4348
Fax: +60 (3) 5636 4352
Email: malaysia@davislighting.com| Singapore Head Office & Sales
Davex Singapore Pte Ltd
Phone: +65 6745 2511
Fax: +65 6745 5828
Email: singapore@davislighting.com
davislighting.com
www.davislighting.com.au

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals