DAVIS LIGHTING MENSA-MST Troffer LED Ceiling Light Instruction Manual
- June 3, 2024
- DAVIS LIGHTING
Table of Contents
DAVIS LIGHTING MENSA-MST Troffer LED Ceiling Light
This installation guide is valid for the following models: MENSA – MST
PRIOR TO INSTALLATION
- Read all instructions to prevent injury, electric shock or damage due to fire or mechanical hazards
- See product label for supply specifications
- Suitable for T-Bar and plastered recessed mount only
Inspect the luminaire and associated parts for any signs of defect, in particular fasteners, cables and the diffuser or glass lens
DO NOT INSTALL THE LUMINAIRE IF IT APPEARS IN ANY WAY FAULTY
Consult with the supplier / sales office for details regarding replacement
CAUTION
- Before commencing installation, turn off and isolate the electrical supply
- Electronic control equipment must not be subjected to high voltages. DO NOT MEGGER between Live and Neutral
- All cable / conduit terminations must be installed in accordance with the designated IP rating of this product
- Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when subjected to vibration and / or movement
- This luminaire must be installed by qualified electrician in accordance with local rules and codes
- This luminaire cannot be disassembled by non-professional persons
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person
- Maintain luminaire and driver clearance distance and also clearance distance from building parts as per local requirements or in accordance to AS/NZS 3000, whichever is greater. WARNING -RISK OF OVERHEATING OR FIRE IF THE CLEARANCE DISTANCES ARE COMPROMISED
INSTALLATION
- Turn OFF the main supply
- Connect the DC cable from driver to fitting then connect mains supply
- Place the luminaire to the T-bar ceiling
- If the luminaire is installed with flex & plug, place the luminaire to the T-bar ceiling then insert plug to the appropriate supply socket.
- Turn ON the main supply
DIMENSIONS
MST2/ MST4
MSTW2/ MSTW4
MSTM2 / MSTM4
MAINTENANCE
The supply must be isolated before opening or accessing the luminaire. Product
maintenance is criticalto the products designed performance. Davis Lighting is
not responsible for any product not maintained in accordance with the
recommended procedure or intervals. It is recommended that a biannual cleaning
cycle is implemented. Inspect optical surfaces for damage or crack. Products
supplied with visors or covers must not be operate with a damaged visor or
cover; it is recommended damaged visors or covers be replaced by a competent
person immediately. Seals and electrical components such as wirings to be
checked for deterioration. All photometric and electrical data published
are of ±10% tolerance. Characteristics and specifications may change without
notice. All electrical installations / connections should be carried out by a
suitably qualified person. Application images are indicative only and may not
contain actual Davis product. The information contained in this publication
istypical and must not be interpreted as a guarantee of individual product
performance
DISPOSAL
This product may contain substances that can be hazardous to the
environment if not disposed of correctly. Electrical and electronic equipment
should never be discarded along with general waste but should be separated
for correct treatment and recovery. Packaging and waste materials should be
recycled wherever possible.
CONTACT
Australia Head Office & Sales Davex Australia Pty Ltd
- Head Office: +61 (7) 3712 8988
- Sales Offices: 1300 851 001
- Fax: +61 (7) 3272 8988
- Email: [email protected]
davislighting.com / www.davislighting.com.au