DAVIS LIGHTING UTOFIA-UFP High Bay Instruction Manual

: June 9, 2024
: DAVIS LIGHTING

Table of Contents

DAVIS LIGHTING UTOFIA-UFP High Bay
PRIOR TO INSTALLATION
INSTALLATION
DIMENSIONS
MAINTENANCE
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DAVIS LIGHTING UTOFIA-UFP High Bay

DAVIS-LIGHTING-UTOFIA-UFP-High-Bay-PRODUCT

This installation guide is valid for the following models:

Utofia – UFP

PRIOR TO INSTALLATION

Read all instructions to prevent injury, electric shock or damage due to fire or mechanical hazards
See product label for supply specifications

Inspect the luminaire and associated parts for any signs of defect, in particular fasteners, cables and the diffuser or glass lens. DO NOT INSTALL THE LUMINAIRE IF IT APPEARS IN ANY WAY FAULTY. Consult with the supplier/sales office for details regarding replacement.

CAUTION

Before commencing installation, turn off and isolate the electrical supply
Electronic control equipment must not be subjected to high voltages. DO NOT MEGGER between Live and Neutral
All cable / conduit terminations must be installed in accordance with the designated IP rating of this product
Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when subjected to vibration and / or movement
This luminaire must be installed by qualified electrician in accordance with local rules and codes
This luminaire cannot be disassembled by non-professional persons
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Prior to installation, products are to be stored in cool dry conditions
Terminal block used must comply to IEC60998-2-1 or IEC60998-2-2, Screw type, 3 poles, 450V, T110, 6mm²

INSTALLATION

Turn OFF the main supply

Pendant mount

Install the eyebolt onto the luminaire.
Hang the luminaire on the hook and safety chain.

Trunnion mount

Install the trunnion arm of luminaire to the bolts.
Drill at least 2 holes at wall and screw the trunnion arm to the wall.
Adjust desired angle by loosening the trunnion arm screws located at both sides.
Connect the mains supply cable (for product without plug)
Connect the mains supply cable (for product with plug)
Turn ON the main supply

WARNING: Unauthorized modification & improper installation void product warranty.

DIMENSIONS

UFP

Model	Dimensions Ø x H (mm)	Weight (kg)
UFP85	280 x 166	2.03
UFP110	320 x 166	2.60
UFP160	360 x 174	2.90
UFP200	400 x 174	3.85

MAINTENANCE

The supply must be isolated before opening or accessing the luminaire. Product maintenance is critical to the products designed performance. Davis Lighting is not responsible for any product not maintained in accordance with the recommended procedure or intervals. It is recommended that a bi-annual cleaning cycle is implemented. Inspect optical surfaces for damage or crack. Products supplied with visors or covers must not be operate with a damaged visor or cover; it is recommended damaged visors or covers be replaced by a competent person immediately. Seals and electrical components such as wirings to be checked for deterioration.

All photometric and electrical data published are of ±10% tolerance. Characteristics and specifications may change without notice. All electrical installations/connections should be carried out by a suitably qualified person. Application images are indicative only and may not contain actual Davis product. The information contained in this publication is typical and must not be interpreted as a guarantee of individual product performance.

This product may contain substances that can be hazardous to the environment if not disposed of correctly. Electrical and electronic equipment should never be discarded along with general waste but should be separated for correct treatment and recovery. Packaging and waste materials should be recycled wherever possible.