ZALMAN CNPS16X Real RGB LED CPU Cooler with 4D Patented Corrugated Fin Design User Manual
- June 9, 2024
- ZALMAN
Table of Contents
ZALMAN CNPS16X Real RGB LED CPU Cooler with 4D Patented Corrugated Fin
Design User Manual
- To ensure safe and easy installation, please read the following precaution.
- Product design and specifications may be revised to improve quality and performance without notice.
Precautions
- Avoid tempering with objects or hands into the fan while it is in operation to prevent product damage and injuries.
- Do not eat the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If irritation persists, seek medical attention.
- To prevent possible injuries, gloves must be worn while handling this product.
- Excessive force exerted on the fan may cause damage to the fan and/or system.
- Use and keep product away from reach of children.
- Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
- Our company assumes no responsibility for any problem that occurs due to theuse of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
- Zalman Tech Co., Ltd. Is not responsible for any damages due to overclocking CPU such as, CPU and system components.
- During transportation of the system, the cooler must be removed. Zalman Tech Co., Ltd. is not responsible for any damages that occur during the transport of a system.
- Product design and specifications may be changed to improve quality and performance without notice
Specifications
| Model | CNPS16X |
|---|---|
| Materials | Pure Copper, Pure Aluminum, ABS |
| Dimensions | 140(L) x 100(W) x 165(H)mm |
| Weight | 880g |
| Heat Dissipation Area | 5,117㎠ |
| TDP | 150W |
| Fan(s) | Dimensions |
| Bearing Type | EBR Bearing |
| Fan Speed | 800~1,500 RPM ±10% |
| Max Noise Level | 27.0 dB(A) ±10% |
| Max Airflow | 49 CFM |
| Max Air Pressure | 1.21mmH2O |
| Rated Voltage | 12 V DC |
| Life Span | 50,000 hours |
| Thermal Compound (ZM-STC8) | Volume / Net Weight |
| Temperature Range | -40℃ ~ +150℃ (-40℉ ~ +302℉) |
Components
- **Cooler
**
- **Fan+Guide
**
- **Fan+Guide (Reverse)
**
- **Top LED Cover
**
- **Intel Guide
**
- **AMD Guide
**
- **Backplate
**
- **Washers
**
- **Side Caps
**
- **Nuts
**
- **Loading Block (Intel)
**
- **Loading Block (AMD)
**
- **Thermal Compound
**
- **Manual
**
- **Fixing Bolts
**
- **Stand-off Nuts
**
- **Standoffs(A) 115X / AM3 / AM4
**
- **Standoffs(B) 2066 / 2011-V3 / 2011
**
- **PWM Fan ‘Y’ Cable
**
- **Gigabyte Cable
**
- **LED Cable
**
INTEL, AMD Backplate
-
Nuts Position
Caution
**** Please check the proper ZALMAN logo direction on backplate for each Intel and AMD socket. No backplate is necessary for Intel LGA2066/2011-V/2011 socket. -
115X
-
AM3
-
AM4
Caution
Take note of the orientation of the nuts and the side caps
INTEL, AMD Loading Block
-
Intel
-
AMD
Caution
Remove the tape cover of loading block and attach it to the backplate
Intel Users
- LGA2066 / 2011-V3 / 2011
Caution
Backplate is not needed for LGA2066 / 2011-V3 / 2011 sockets.
Caution
Screw-in both bolts in an alternating fashion until they are completely
tightened.
Caution
Please check the direction of the fan before installation.
- **LGA115X
Caution
**Screw-in both bolts in an alternating fashion until they are completely
tightened.
Caution
Please check the direction of the fan before installation.
AMD Userse
- AM3 / AM4
Caution
Please be cautious for the direction of AMD Guide installation
Caution
Screw-in both bolts in an alternating fashion until they are completely
tightened.
Caution
Please check the direction of the fan before installation
Cable Connection
-
Connection to other motherboards
-
Connection to Gigabyte motherboards
Fan Specifications
Model : LF120
- Dimensions : 120 x 120 x 26(H)mm
- Fan Speed : 800 ~ 1,500 ±10% RPM
- Max Noise Level : 27 dB(A) ±10%
- Bearing Type : EBR Bearing
- Max Airflow : 49 CFM ±10%
- Max Air Pressure : 1.21mmH2O
- Pin Connector : 4-Pin (PWM), 3-Pin (Addressable)
- Rated Voltage : 5~12 V DC
- Life Span : 50,000 hours
Model : LF120 (Reverse)
- Dimensions : 120 x 120 x 26(H)mm
- Fan Speed : 800 ~ 1,500 ±10% RPM
- Max Noise Le v el : 27 dB(A) ±10%
- Bearing Type : EBR Bearing
- Max Airflow : 49 CFM ±10%
- Max Air Pressure : 1.21mmH2O
- Pin Connector : 4-Pin (PWM), 3-Pin (Addressable)
- Rated Voltage : 5~12 V DC
- Life Span : 50,000 hours
This mark, designed by Zalman, indicates product compliance with the European Union’s RoHS (Restriction of Hazardous Substances) Directive.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>