PHILIPS DreamWear Under the Nose Nasal and Full Face Masks User Guide
- June 3, 2024
- Philips
Table of Contents
PHILIPS DreamWear Under the Nose Nasal and Full Face Masks User Guide
Instructions
- Print out this Adobe PDF File at 100% on your printer. Use the print accuracy check at right to ensure printing at the proper size.
- Fold the bottom part of this page on the dashed line.
- Cut along the dotted line around the fitting gauge.
- Place the fitting gauge on your nose as shown in the picture below.
- Determine the appropriate size where the outer edge of your nostrils and tip of your nose contact the fitting gauge. (S – Small, M – Medium, MW – Medium wide or L – Large)
Tip: For the best performance, use the smallest cushion that fits your nose.
Philips Respironics always recommends consulting a physician or registered Sleep Therapist in fitting a mask to ensure a proper sizing and fit.
FOLD along dashed line
Print accuracy check
Fitting gauge
- CUT along dotted line
- DreamWear Under the nose nasal and full face masks
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>