ECOLAB 110003454 XP Foamer Powerful Cleaning Machine User Guide
- June 4, 2024
- ECOLAB
Table of Contents
ECOLAB 110003454 XP Foamer Powerful Cleaning Machine
Start/Preparing
- Connect water supply hose to the inlet fitting on the side of the unit. The water supply line should have a quick connect fitting that will easily connect to the inlet fitting.
- Make sure the ball valve at the end of the blue hose is closed. The valve handle is perpendicular to the hose in the close position.
- Turn on water supply to the unit.
- Insert plug into a 220V outlet.
- Pull back the valve sleeve. Insert the nozzle. Release the valve sleeve. Pull on the end of the nozzle to make sure the nozzle is securely connected to the ball valve. If not, repeat the previous steps until the nozzle I securely con-nected to the ball valve. a) The foam operation requires the WHITE nozzle. Rinsing and sanitizing operations require the BLUE nozzle. Both nozzles connect to the ball valve in the same manner.
- Turn the selector switch on the front of the unit to the desired operation.
- Point the ball valve and noz-zle at the desired location.
- To open the ball valve handle clockwise. The valve is fully open when the handle is parallel to the hose.
- Apply foam, rinse water or sanitizer.
Change cleaning agent
Stop Procedure
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>