EKWB EK-Quantum Surface P240M Radiator User Guide
- June 4, 2024
- ekwb
Table of Contents
EKWB EK-Quantum Surface P240M Radiator
EK-QUANTUM SURFACE RADIATORS
EK-Quantum Surface Radiators have a classical U-shape coolant flow, with inlet and outlet both on one side of the radiator. However, you can still choose which port of the radiator will serve as an inlet, and which for the outlet in your custom loop.
-
SETUP 1 : Picture on the left shows the first flow direction setup of the EK-Quantum Surface P360M Radiator which is a Multiport radiator. On the non-multiport radiator you can choose only one inlet and one outlet port.
-
SETUP 2 : Picture on the left shows the second flow direction setup of the EK-Quantum Surface P360M Radiator which is a Multiport Radiator. On the non-multiport radiator you can choose only one inlet and one outlet port.
-
EK recommends using the same number of inlets and outlets for the most optimal performance!
-
It is mandatory to use the extenders on any inlet and outlet position!
-
If transferred from the stock position of the radiator to another, check if the extenders are tightened to avoid leakage!
-
The same port setup applies for all EK-Quantum Surface radiator variants!
On the Multiport Radiator, opposing to the inlet/outlet side of the radiator, there is an extra port for filling or draining the loop.
It should not be used as an inlet or an outlet port!
EXPLODED VIEW OF THE REMOVABLE COMPONENTS FOR S, P AND X SERIES
- EK-QUANTUM SURFACE S SERIES
- EK-QUANTUM SURFACE P SERIES
- EK-QUANTUM SURFACE X SERIES
SUPPORT AND SERVICE
In case you need assistance, please contact: https://www.ekwb.com/customer- support/
- EKWB d.o.o.
- Pod lipami 18
- 1218 Komenda
- Slovenia – EU
SOCIAL MEDIA
- EKWaterBlocks
- @EKWaterBlocks
- ekwaterblocks
- EKWBofficial
- ekwaterblocks
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>