circa LIGHTING CHA 9501 Aiden Accent Floor Lamp Instruction Manual
- June 3, 2024
- circa LIGHTING
Table of Contents
ASSEMBLY INSTRUCTIONS
Aiden Accent Floor Lamp
Item # CHA 9501
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Scissors
- Carefully remove all parts from the box. Place on a clean, soft surface.
- Install harp (C) by squeezing together and inserting into top of saddle (D).
- Remove finial (A) from harp (C).
- Remove shade (B) from packaging and install to harp (C) using finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.
- Install light bulb into the socket.
- Remove protective cover (E) from plug.
- Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>